testing: Migrate MOBIKE tests to vici

Note that the mobike-nat test has been removed as it basically did the same
as the mobike-virtual-ip-nat test.  Instead, the mobike-nat-mapping scenario
is added, which simulates a NAT router restart.
This commit is contained in:
Tobias Brunner
2021-06-21 12:03:36 +02:00
committed by Andreas Steffen
parent abe51389c5
commit 2b5c743952
65 changed files with 404 additions and 332 deletions
@@ -1,7 +0,0 @@
The roadwarrior <b>alice</b> is sitting behind the NAT router <b>moon</b> but
at the outset of the scenario is also directly connected to the 192.168.0.0/24 network
via an additional <b>eth1</b> interface. <b>alice</b> builds up a tunnel to gateway <b>sun</b>
in order to reach <b>bob</b> in the subnet behind. When the <b>eth1</b> interface
goes away, <b>alice</b> switches to <b>eth0</b> and signals the IP address change
via a MOBIKE ADDRESS_UPDATE notification to peer <b>sun</b>. <b>alice</b> sets
a virtual IP of 10.3.0.3, so that the IPsec policies don't have to be changed.
@@ -1,18 +0,0 @@
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE1.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_ALICE1::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifdown eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_MOON::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
sun::tcpdump::alice1.strongswan.org.*sun.strongswan.org: ESP.*seq=0x1::YES
sun::tcpdump::sun.strongswan.org.*alice1.strongswan.org: ESP.*seq=0x1::YES
moon::tcpdump::moon.strongswan.org.*sun.strongswan.org.*: UDP-encap: ESP.*seq=0x2::YES
moon::tcpdump::sun.strongswan.org.*moon.strongswan.org.*: UDP-encap: ESP.*seq=0x2::YES
bob::tcpdump::10.3.0.3.*bob.strongswan.org.*ICMP echo request::YES
bob::tcpdump::bob.strongswan.org.*10.3.0.3.*ICMP echo reply::YES
@@ -1,20 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=192.168.0.50
leftsourceip=%config
leftcert=aliceCert.pem
[email protected]
right=PH_IP_SUN
[email protected]
rightsubnet=10.2.0.0/16
auto=add
@@ -1,42 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow traffic on lo as ifup/ifdown call bind's rndc which accesses TCP 953
-A OUTPUT -o lo -j ACCEPT
-A INPUT -i lo -j ACCEPT
# allow IPsec tunnel traffic
-A INPUT -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A OUTPUT -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A INPUT -i eth1 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,5 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -1,20 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=PH_IP_SUN
leftcert=sunCert.pem
[email protected]
leftsubnet=10.2.0.0/16
right=%any
rightsourceip=10.3.0.3
[email protected]
auto=add
@@ -1,32 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow IPsec tunnel traffic
-A FORWARD -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A FORWARD -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,5 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -1,5 +0,0 @@
alice::ipsec stop
sun::ipsec stop
alice::iptables-restore < /etc/iptables.flush
sun::iptables-restore < /etc/iptables.flush
moon::iptables -t nat -F
@@ -1,10 +0,0 @@
alice::ifup eth1
alice::iptables-restore < /etc/iptables.rules
sun::iptables-restore < /etc/iptables.rules
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p udp -j SNAT --to-source PH_IP_MOON:1024-1100
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p tcp -j SNAT --to-source PH_IP_MOON:2000-2100
alice::ipsec start
sun::ipsec start
alice::expect-connection mobike
sun::expect-connection mobike
alice::ipsec up mobike
@@ -1,21 +0,0 @@
#!/bin/bash
#
# This configuration file provides information on the
# guest instances used for this test
# All guest instances that are required for this test
#
VIRTHOSTS="alice moon winnetou sun bob"
# Corresponding block diagram
#
DIAGRAM="a-m-w-s-b.png"
# Guest instances on which tcpdump is to be started
#
TCPDUMPHOSTS="bob moon sun"
# Guest instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice sun"
@@ -1,9 +0,0 @@
The roadwarrior <b>alice</b> is sitting behind the NAT router <b>moon</b> but
at the outset of the scenario is also directly connected to the 192.168.0.0/24 network
via an additional <b>eth1</b> interface. <b>alice</b> builds up a tunnel to gateway <b>sun</b>
in order to reach <b>bob</b> in the subnet behind. When the <b>eth1</b> interface
goes away, <b>alice</b> switches to <b>eth0</b> and signals the IP address change
via a MOBIKE ADDRESS_UPDATE notification to peer <b>sun</b>. Later the interface
comes back up again and because the best path is preferred (charon.prefer_best_path)
there is another switch to the directly connected path. <b>alice</b> sets
a virtual IP of 10.3.0.3, so that the IPsec policies don't have to be changed.
@@ -1,31 +0,0 @@
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*192.168.0.50.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*192.168.0.50::YES
alice::ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
sun:: ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifdown eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_MOON::YES
alice::ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP in UDP SPIs::YES
sun:: ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP in UDP SPIs::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifup eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*192.168.0.50.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*192.168.0.50::YES
alice::ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
sun:: ipsec status 2> /dev/null::mobike.*INSTALLED.*ESP SPIs::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
sun::tcpdump::alice1.strongswan.org.*sun.strongswan.org: ESP.*seq=0x1::YES
sun::tcpdump::sun.strongswan.org.*alice1.strongswan.org: ESP.*seq=0x1::YES
moon::tcpdump::moon.strongswan.org.*sun.strongswan.org.*: ESP.*seq=0x2::YES
moon::tcpdump::sun.strongswan.org.*moon.strongswan.org.*: ESP.*seq=0x2::YES
bob::tcpdump::10.3.0.3.*bob.strongswan.org.*ICMP echo request::3
bob::tcpdump::bob.strongswan.org.*10.3.0.3.*ICMP echo reply::3
@@ -1,19 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
leftsourceip=%config
leftcert=aliceCert.pem
[email protected]
right=PH_IP_SUN
[email protected]
rightsubnet=10.2.0.0/16
auto=add
@@ -1,42 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow traffic on lo as ifup/ifdown call bind's rndc which accesses TCP 953
-A OUTPUT -o lo -j ACCEPT
-A INPUT -i lo -j ACCEPT
# allow IPsec tunnel traffic
-A INPUT -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A OUTPUT -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A INPUT -i eth1 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,12 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
prefer_best_path = yes
syslog {
daemon {
knl = 2
}
}
}
@@ -1,20 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=PH_IP_SUN
leftcert=sunCert.pem
[email protected]
leftsubnet=10.2.0.0/16
right=%any
rightsourceip=10.3.0.3
[email protected]
auto=add
@@ -1,32 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow IPsec tunnel traffic
-A FORWARD -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A FORWARD -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,11 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
syslog {
daemon {
knl = 2
}
}
}
@@ -1,6 +0,0 @@
alice::ipsec stop
sun::ipsec stop
alice::ifdown eth1
alice::iptables-restore < /etc/iptables.flush
sun::iptables-restore < /etc/iptables.flush
moon::iptables -t nat -F
@@ -1,10 +0,0 @@
alice::ifup eth1
alice::iptables-restore < /etc/iptables.rules
sun::iptables-restore < /etc/iptables.rules
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p udp -j SNAT --to-source PH_IP_MOON:1024-1100
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p tcp -j SNAT --to-source PH_IP_MOON:2000-2100
alice::ipsec start
sun::ipsec start
alice::expect-connection mobike
sun::expect-connection mobike
alice::ipsec up mobike
@@ -1,21 +0,0 @@
#!/bin/bash
#
# This configuration file provides information on the
# guest instances used for this test
# All guest instances that are required for this test
#
VIRTHOSTS="alice moon winnetou sun bob"
# Corresponding block diagram
#
DIAGRAM="a-m-w-s-b.png"
# Guest instances on which tcpdump is to be started
#
TCPDUMPHOSTS="bob moon sun"
# Guest instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice sun"
@@ -1,7 +0,0 @@
The roadwarrior <b>alice</b> is sitting behind the router <b>moon</b> but
at the outset of the scenario is also directly connected to the 192.168.0.0/24 network
via an additional <b>eth1</b> interface. <b>alice</b> builds up a tunnel to gateway <b>sun</b>
in order to reach <b>bob</b> in the subnet behind. When the <b>eth1</b> interface
goes away, <b>alice</b> switches to <b>eth0</b> and signals the IP address change
via a MOBIKE ADDRESS_UPDATE notification to peer <b>sun</b>. <b>alice</b> sets
a virtual IP of 10.3.0.3, so that the IPsec policies don't have to be changed.
@@ -1,18 +0,0 @@
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*192.168.0.50.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*192.168.0.50::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifdown eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_ALICE::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
sun::tcpdump::alice1.strongswan.org.*sun.strongswan.org: ESP.*seq=0x1::YES
sun::tcpdump::sun.strongswan.org.*alice1.strongswan.org: ESP.*seq=0x1::YES
moon::tcpdump::alice.strongswan.org.*sun.strongswan.org.*: ESP.*seq=0x2::YES
moon::tcpdump::sun.strongswan.org.*alice.strongswan.org.*: ESP.*seq=0x2::YES
bob::tcpdump::10.3.0.3.*bob.strongswan.org.*ICMP echo request::YES
bob::tcpdump::bob.strongswan.org.*10.3.0.3.*ICMP echo reply::YES
@@ -1,20 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=192.168.0.50
leftsourceip=%config
leftcert=aliceCert.pem
[email protected]
right=PH_IP_SUN
[email protected]
rightsubnet=10.2.0.0/16
auto=add
@@ -1,42 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow traffic on lo as ifup/ifdown call bind's rndc which accesses TCP 953
-A OUTPUT -o lo -j ACCEPT
-A INPUT -i lo -j ACCEPT
# allow IPsec tunnel traffic
-A INPUT -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A OUTPUT -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A INPUT -i eth1 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,5 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -1,20 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=PH_IP_SUN
leftcert=sunCert.pem
[email protected]
leftsubnet=10.2.0.0/16
right=192.168.0.50
rightsourceip=10.3.0.3
[email protected]
auto=add
@@ -1,32 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow IPsec tunnel traffic
-A FORWARD -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A FORWARD -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,5 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -1,5 +0,0 @@
alice::ipsec stop
sun::ipsec stop
alice::iptables-restore < /etc/iptables.flush
sun::iptables-restore < /etc/iptables.flush
sun::ip route del 10.1.0.0/16 via PH_IP_MOON
@@ -1,9 +0,0 @@
alice::ifup eth1
alice::iptables-restore < /etc/iptables.rules
sun::iptables-restore < /etc/iptables.rules
sun::ip route add 10.1.0.0/16 via PH_IP_MOON
alice::ipsec start
sun::ipsec start
alice::expect-connection mobike
sun::expect-connection mobike
alice::ipsec up mobike
@@ -1,21 +0,0 @@
#!/bin/bash
#
# This configuration file provides information on the
# guest instances used for this test
# All guest instances that are required for this test
#
VIRTHOSTS="alice moon winnetou sun bob"
# Corresponding block diagram
#
DIAGRAM="a-m-w-s-b.png"
# Guest instances on which tcpdump is to be started
#
TCPDUMPHOSTS="bob moon sun"
# Guest instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice sun"
@@ -1,7 +0,0 @@
The roadwarrior <b>alice</b> is sitting behind the router <b>moon</b> but
at the outset of the scenario is also directly connected to the 192.168.0.0/24 network
via an additional <b>eth1</b> interface. <b>alice</b> builds up a tunnel to gateway <b>sun</b>
in order to reach <b>bob</b> in the subnet behind. When the <b>eth1</b> interface
goes away, <b>alice</b> switches to <b>eth0</b> and signals the IP address change
via a MOBIKE ADDRESS_UPDATE notification to peer <b>sun</b>. Since <b>alice</b> has
not configured a virtual IP address the IPsec policies must be updated.
@@ -1,20 +0,0 @@
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*192.168.0.50.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*192.168.0.50::YES
alice::ipsec statusall 2> /dev/null::192.168.0.50/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 192.168.0.50/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifdown eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_ALICE::YES
alice::ipsec statusall 2> /dev/null::PH_IP_ALICE/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === PH_IP_ALICE/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
sun::tcpdump::alice1.strongswan.org.*sun.strongswan.org: ESP.*seq=0x1::YES
sun::tcpdump::sun.strongswan.org.*alice1.strongswan.org: ESP.*seq=0x1::YES
moon::tcpdump::alice.strongswan.org.*sun.strongswan.org: ESP.*seq=0x2::YES
moon::tcpdump::sun.strongswan.org.*alice.strongswan.org: ESP.*seq=0x2::YES
bob::tcpdump::alice1.strongswan.org.*bob.strongswan.org.*ICMP echo request::YES
bob::tcpdump::bob.strongswan.org.*alice1.strongswan.org.*ICMP echo reply::YES
bob::tcpdump::alice.strongswan.org.*bob.strongswan.org.*ICMP echo request::YES
bob::tcpdump::bob.strongswan.org.*alice.strongswan.org.*ICMP echo reply::YES
@@ -1,19 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=192.168.0.50
leftcert=aliceCert.pem
[email protected]
right=PH_IP_SUN
[email protected]
rightsubnet=10.2.0.0/16
auto=add
@@ -1,42 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow traffic on lo as ifup/ifdown call bind's rndc which accesses TCP 953
-A OUTPUT -o lo -j ACCEPT
-A INPUT -i lo -j ACCEPT
# allow IPsec tunnel traffic
-A INPUT -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A OUTPUT -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A INPUT -i eth1 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,5 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -1,19 +0,0 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=PH_IP_SUN
leftcert=sunCert.pem
[email protected]
leftsubnet=10.2.0.0/16
right=192.168.0.50
[email protected]
auto=add
@@ -1,32 +0,0 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow IPsec tunnel traffic
-A FORWARD -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A FORWARD -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -1,5 +0,0 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -1,5 +0,0 @@
alice::ipsec stop
sun::ipsec stop
alice::iptables-restore < /etc/iptables.flush
sun::iptables-restore < /etc/iptables.flush
sun::ip route del 10.1.0.0/16 via PH_IP_MOON
@@ -1,9 +0,0 @@
alice::ifup eth1
alice::iptables-restore < /etc/iptables.rules
sun::iptables-restore < /etc/iptables.rules
sun::ip route add 10.1.0.0/16 via PH_IP_MOON
alice::ipsec start
sun::ipsec start
alice::expect-connection mobike
sun::expect-connection mobike
alice::ipsec up mobike
@@ -1,21 +0,0 @@
#!/bin/bash
#
# This configuration file provides information on the
# guest instances used for this test
# All guest instances that are required for this test
#
VIRTHOSTS="alice moon winnetou sun bob"
# Corresponding block diagram
#
DIAGRAM="a-m-w-s-b.png"
# Guest instances on which tcpdump is to be started
#
TCPDUMPHOSTS="bob moon sun"
# Guest instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice sun"