moved TNC scenarios to tnc folder

2011-06-03 00:47:20 +02:00
parent 145a8b04d1
commit 2e60060095
215 changed files with 413 additions and 131 deletions
@@ -1,11 +0,0 @@
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>.
-At the outset the gateway authenticates itself to the clients by sending an IKEv2
-<b>RSA signature</b> accompanied by a certificate.
-<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to
-the FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate.
-The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>.
-In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
-health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
-<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements <b>carol</b>
-is authenticated successfully and is granted access to the subnet behind <b>moon</b> whereas 
-<b>dave</b> fails the layered EAP authentication and is rejected.
@@ -1,14 +0,0 @@
-carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
-carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
-carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES
-carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/16::YES
-dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
-dave::cat /var/log/daemon.log::TNCCS-Recommendation.*none::YES
-dave::cat /var/log/daemon.log::received EAP_FAILURE, EAP authentication failed::YES
-dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.0/16::NO
-moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES         
-moon::cat /var/log/daemon.log::RADIUS authentication of '[email protected]' failed::YES
-moon::cat /var/log/daemon.log::EAP method EAP_TTLS failed for peer [email protected]::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
-
@@ -1,4 +0,0 @@
-client PH_IP_MOON1 {
-  secret    = gv6URkSs 
-  shortname = moon
-}
@@ -1,2 +0,0 @@
-$INCLUDE	/usr/share/freeradius/dictionary
-$INCLUDE	/etc/raddb/dictionary.tnc
@@ -1,5 +0,0 @@
-ATTRIBUTE	TNC-Status	3001	integer
-
-VALUE	TNC-Status	Access	0 
-VALUE	TNC-Status	Isolate	1
-VALUE	TNC-Status	None	2
@@ -1,25 +0,0 @@
-eap {
-  md5 {
-  }
-  default_eap_type = ttls
-  tls {
-    private_key_file = /etc/raddb/certs/aaaKey.pem
-    certificate_file = /etc/raddb/certs/aaaCert.pem
-    CA_file = /etc/raddb/certs/strongswanCert.pem
-    cipher_list = "DEFAULT"
-    dh_file = /etc/raddb/certs/dh
-    random_file = /etc/raddb/certs/random
-  }
-  ttls {
-    default_eap_type = md5
-    use_tunneled_reply = yes
-    virtual_server = "inner-tunnel"
-    tnc_virtual_server = "inner-tunnel-second"
-  }
-}
-
-eap eap_tnc {
-      default_eap_type = tnc
-      tnc {
-      }
-}
@@ -1,5 +0,0 @@
-realm strongswan.org {
-  type     = radius
-  authhost = LOCAL
-  accthost = LOCAL
-}
@@ -1,120 +0,0 @@
-# radiusd.conf	-- FreeRADIUS server configuration file.
-
-prefix = /usr
-exec_prefix = ${prefix}
-sysconfdir = /etc
-localstatedir = /var
-sbindir = ${exec_prefix}/sbin
-logdir = ${localstatedir}/log/radius
-raddbdir = ${sysconfdir}/raddb
-radacctdir = ${logdir}/radacct
-
-#  name of the running server.  See also the "-n" command-line option.
-name = radiusd
-
-#  Location of config and logfiles.
-confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/radiusd
-
-# Should likely be ${localstatedir}/lib/radiusd
-db_dir = ${raddbdir}
-
-# libdir: Where to find the rlm_* modules.
-libdir = ${exec_prefix}/lib
-
-#  pidfile: Where to place the PID of the RADIUS server.
-pidfile = ${run_dir}/${name}.pid
-
-#  max_request_time: The maximum time (in seconds) to handle a request.
-max_request_time = 30
-
-#  cleanup_delay: The time to wait (in seconds) before cleaning up
-cleanup_delay = 5
-
-#  max_requests: The maximum number of requests which the server keeps
-max_requests = 1024
-
-#  listen: Make the server listen on a particular IP address, and send
-listen {
-  type = auth
-  ipaddr = PH_IP_ALICE 
-  port = 0
-}
-
-#  This second "listen" section is for listening on the accounting
-#  port, too.
-#
-listen {
-  type  = acct
-  ipaddr = PH_IP_ALICE 
-  port = 0
-}
-
-#  hostname_lookups: Log the names of clients or just their IP addresses
-hostname_lookups = no
-
-#  Core dumps are a bad thing.  This should only be set to 'yes'
-allow_core_dumps = no
-
-#  Regular expressions
-regular_expressions = yes
-extended_expressions = yes
-
-#  Logging section.  The various "log_*" configuration items
-log {
-  destination = files
-  file = ${logdir}/radius.log
-  syslog_facility = daemon
-  stripped_names = no
-  auth = yes 
-  auth_badpass = yes 
-  auth_goodpass = yes 
-}
-
-#  The program to execute to do concurrency checks.
-checkrad = ${sbindir}/checkrad
-
-#  Security considerations
-security {
-  max_attributes = 200
-  reject_delay = 1
-  status_server = yes
-}
-
-# PROXY CONFIGURATION
-proxy_requests = yes
-$INCLUDE proxy.conf
-
-# CLIENTS CONFIGURATION
-$INCLUDE clients.conf
-
-# THREAD POOL CONFIGURATION
-thread pool {
-  start_servers = 5
-  max_servers = 32
-  min_spare_servers = 3
-  max_spare_servers = 10
-  max_requests_per_server = 0
-}
-
-# MODULE CONFIGURATION
-modules {
-  $INCLUDE ${confdir}/modules/
-  $INCLUDE eap.conf
-  $INCLUDE sql.conf
-  $INCLUDE sql/mysql/counter.conf
-}
-
-# Instantiation
-instantiate {
-  exec
-  expr
-  expiration
-  logintime
-}
-
-# Policies
-$INCLUDE policy.conf
-
-# Include all enabled virtual hosts
-$INCLUDE sites-enabled/
@@ -1,44 +0,0 @@
-authorize {
-  suffix
-  eap {
-    ok = return
-  }
-  files
-}
-
-authenticate {
-  eap
-}
-
-preacct {
-  preprocess
-  acct_unique
-  suffix
-  files
-}
-
-accounting {
-  detail
-  unix
-  radutmp
-  attr_filter.accounting_response
-}
-
-session {
-  radutmp
-}
-
-post-auth {
-  exec
-  Post-Auth-Type REJECT {
-    attr_filter.access_reject
-  }
-}
-
-pre-proxy {
-}
-
-post-proxy {
-  eap
-}
-
@@ -1,32 +0,0 @@
-server inner-tunnel {
-
-authorize {
-	suffix
-	eap {
-		ok = return
-	}
-	files
-}
-
-authenticate {
-	eap
-}
-
-session {
-	radutmp
-}
-
-post-auth {
-	Post-Auth-Type REJECT {
-		attr_filter.access_reject
-	}
-}
-
-pre-proxy {
-}
-
-post-proxy {
-	eap
-}
-
-} # inner-tunnel server block
@@ -1,23 +0,0 @@
-server inner-tunnel-second {
-
-authorize {
-	eap_tnc {
-		ok = return
-	}
-}
-
-authenticate {
-	eap_tnc
-}
-
-session {
-	radutmp
-}
-
-post-auth {
-	Post-Auth-Type REJECT {
-		attr_filter.access_reject
-	}
-}
-
-} # inner-tunnel-second block
@@ -1,2 +0,0 @@
-carol	Cleartext-Password := "Ar3etTnp"
-dave	Cleartext-Password := "W7R0g3do"
@@ -1,3 +0,0 @@
-#IMV configuration file for TNC@FHH-TNC-Server
-
-IMV "Dummy" /usr/local/lib/libdummyimv.so.0.7.0
@@ -1,24 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_CAROL
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	rightauth=pubkey
-	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "Ar3etTnp"
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
-  multiple_authentication=no
-}
@@ -1 +0,0 @@
-allow
@@ -1,3 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Dummy" /usr/local/lib/libdummyimc.so
@@ -1,24 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_DAVE
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	rightauth=pubkey
-	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "W7R0g3do"
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
-  multiple_authentication=no
-}
@@ -1 +0,0 @@
-none
@@ -1,3 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Dummy" /usr/local/lib/libdummyimc.so
@@ -1,84 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-opts="start stop reload"
-
-depend() {
-	before net
-	need logger
-}
-
-start() {
-	ebegin "Starting firewall"
-
-	# enable IP forwarding
-	echo 1 > /proc/sys/net/ipv4/ip_forward
-	
-	# default policy is DROP
-	/sbin/iptables -P INPUT DROP
-	/sbin/iptables -P OUTPUT DROP
-	/sbin/iptables -P FORWARD DROP
-
-	# allow esp
-	iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
-
-	# allow IKE
-	iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-
-	# allow MobIKE
-	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-
-	# allow crl fetch from winnetou
-	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
-
-	# allow RADIUS protocol with alice
-	iptables -A INPUT  -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT
-	iptables -A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT
-
-	# allow ssh
-	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
-	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
-
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping firewall"
-		for a in `cat /proc/net/ip_tables_names`; do
-			/sbin/iptables -F -t $a
-			/sbin/iptables -X -t $a
-	
-			if [ $a == nat ]; then
-				/sbin/iptables -t nat -P PREROUTING ACCEPT
-				/sbin/iptables -t nat -P POSTROUTING ACCEPT
-				/sbin/iptables -t nat -P OUTPUT ACCEPT
-			elif [ $a == mangle ]; then
-				/sbin/iptables -t mangle -P PREROUTING ACCEPT
-				/sbin/iptables -t mangle -P INPUT ACCEPT
-				/sbin/iptables -t mangle -P FORWARD ACCEPT
-				/sbin/iptables -t mangle -P OUTPUT ACCEPT
-				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
-			elif [ $a == filter ]; then
-				/sbin/iptables -t filter -P INPUT ACCEPT
-				/sbin/iptables -t filter -P FORWARD ACCEPT
-				/sbin/iptables -t filter -P OUTPUT ACCEPT
-			fi
-		done
-	eend $?
-}
-
-reload() {
-	ebegin "Flushing firewall"
-		for a in `cat /proc/net/ip_tables_names`; do
-			/sbin/iptables -F -t $a
-			/sbin/iptables -X -t $a
-		done;
-        eend $?
-	start
-}
-
@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	strictcrlpolicy=no
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn rw-eap
-	left=PH_IP_MOON
-	leftsubnet=10.1.0.0/16
-	leftcert=moonCert.pem
-	[email protected]
-	leftauth=pubkey
-	leftfirewall=yes
-	rightauth=eap-radius
-	rightid=*@strongswan.org
-	rightsendcert=never
-	right=%any
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-: RSA moonKey.pem
@@ -1,12 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-radius updown
-  multiple_authentication=no
-  plugins {
-    eap-radius {
-      secret = gv6URkSs 
-      server = PH_IP_ALICE
-    }
-  }
-}
@@ -1,8 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop
-dave::ipsec stop
-alice::/etc/init.d/radiusd stop
-alice::rm /etc/raddb/sites-enabled/inner-tunnel-second
-moon::/etc/init.d/iptables stop 2> /dev/null
-carol::/etc/init.d/iptables stop 2> /dev/null
-dave::/etc/init.d/iptables stop 2> /dev/null
@@ -1,15 +0,0 @@
-moon::/etc/init.d/iptables start 2> /dev/null
-carol::/etc/init.d/iptables start 2> /dev/null
-dave::/etc/init.d/iptables start 2> /dev/null
-alice::ln -s /etc/raddb/sites-available/inner-tunnel-second /etc/raddb/sites-enabled/inner-tunnel-second
-alice::cat /etc/raddb/sites-enabled/inner-tunnel-second
-alice::/etc/init.d/radiusd start
-carol::cat /etc/tnc/dummyimc.file
-dave::cat /etc/tnc/dummyimc.file
-moon::ipsec start
-carol::ipsec start
-dave::ipsec start
-carol::sleep 1
-carol::ipsec up home
-dave::ipsec up home
-dave::sleep 1
@@ -1,26 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou dave"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w-d.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol dave"
-
-# UML instances on which FreeRadius is started
-#
-RADIUSHOSTS="alice"
-
@@ -1,11 +0,0 @@
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>.
-At the outset the gateway authenticates itself to the clients by sending an IKEv2
-<b>RSA signature</b> accompanied by a certificate.
-<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to
-the FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate.
-The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>.
-In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
-health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
-<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements exchanged
-via the <b>IF-M</b> (RFC 5792 PA-TNC) protocol, the clients are connected by gateway <b>moon</b>
-to the "rw-allow" and "rw-isolate" subnets, respectively.
@@ -1,19 +0,0 @@
-carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
-carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
-carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
-carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/28::YES
-dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
-dave::cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES
-dave::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
-dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.16/28::YES
-moon::cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'allow'::YES
-moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES            
-moon::cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'isolate'::YES
-moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
-moon::ipsec statusall::rw-allow.*10.1.0.0/28 === 192.168.0.100/32::YES
-moon::ipsec statusall::rw-isolate.*10.1.0.16/28 === 192.168.0.200/32::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_ALICE: icmp_seq=1::NO
-dave::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
-dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
-
@@ -1,4 +0,0 @@
-client PH_IP_MOON1 {
-  secret    = gv6URkSs 
-  shortname = moon
-}
@@ -1,2 +0,0 @@
-$INCLUDE	/usr/share/freeradius/dictionary
-$INCLUDE	/etc/raddb/dictionary.tnc
@@ -1,5 +0,0 @@
-ATTRIBUTE	TNC-Status	3001	integer
-
-VALUE	TNC-Status	Access	0 
-VALUE	TNC-Status	Isolate	1
-VALUE	TNC-Status	None	2
@@ -1,25 +0,0 @@
-eap {
-  md5 {
-  }
-  default_eap_type = ttls
-  tls {
-    private_key_file = /etc/raddb/certs/aaaKey.pem
-    certificate_file = /etc/raddb/certs/aaaCert.pem
-    CA_file = /etc/raddb/certs/strongswanCert.pem
-    cipher_list = "DEFAULT"
-    dh_file = /etc/raddb/certs/dh
-    random_file = /etc/raddb/certs/random
-  }
-  ttls {
-    default_eap_type = md5
-    use_tunneled_reply = yes
-    virtual_server = "inner-tunnel"
-    tnc_virtual_server = "inner-tunnel-second"
-  }
-}
-
-eap eap_tnc {
-      default_eap_type = tnc
-      tnc {
-      }
-}
@@ -1,5 +0,0 @@
-realm strongswan.org {
-  type     = radius
-  authhost = LOCAL
-  accthost = LOCAL
-}
@@ -1,120 +0,0 @@
-# radiusd.conf	-- FreeRADIUS server configuration file.
-
-prefix = /usr
-exec_prefix = ${prefix}
-sysconfdir = /etc
-localstatedir = /var
-sbindir = ${exec_prefix}/sbin
-logdir = ${localstatedir}/log/radius
-raddbdir = ${sysconfdir}/raddb
-radacctdir = ${logdir}/radacct
-
-#  name of the running server.  See also the "-n" command-line option.
-name = radiusd
-
-#  Location of config and logfiles.
-confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/radiusd
-
-# Should likely be ${localstatedir}/lib/radiusd
-db_dir = ${raddbdir}
-
-# libdir: Where to find the rlm_* modules.
-libdir = ${exec_prefix}/lib
-
-#  pidfile: Where to place the PID of the RADIUS server.
-pidfile = ${run_dir}/${name}.pid
-
-#  max_request_time: The maximum time (in seconds) to handle a request.
-max_request_time = 30
-
-#  cleanup_delay: The time to wait (in seconds) before cleaning up
-cleanup_delay = 5
-
-#  max_requests: The maximum number of requests which the server keeps
-max_requests = 1024
-
-#  listen: Make the server listen on a particular IP address, and send
-listen {
-  type = auth
-  ipaddr = PH_IP_ALICE 
-  port = 0
-}
-
-#  This second "listen" section is for listening on the accounting
-#  port, too.
-#
-listen {
-  type  = acct
-  ipaddr = PH_IP_ALICE 
-  port = 0
-}
-
-#  hostname_lookups: Log the names of clients or just their IP addresses
-hostname_lookups = no
-
-#  Core dumps are a bad thing.  This should only be set to 'yes'
-allow_core_dumps = no
-
-#  Regular expressions
-regular_expressions = yes
-extended_expressions = yes
-
-#  Logging section.  The various "log_*" configuration items
-log {
-  destination = files
-  file = ${logdir}/radius.log
-  syslog_facility = daemon
-  stripped_names = no
-  auth = yes 
-  auth_badpass = yes 
-  auth_goodpass = yes 
-}
-
-#  The program to execute to do concurrency checks.
-checkrad = ${sbindir}/checkrad
-
-#  Security considerations
-security {
-  max_attributes = 200
-  reject_delay = 1
-  status_server = yes
-}
-
-# PROXY CONFIGURATION
-proxy_requests = yes
-$INCLUDE proxy.conf
-
-# CLIENTS CONFIGURATION
-$INCLUDE clients.conf
-
-# THREAD POOL CONFIGURATION
-thread pool {
-  start_servers = 5
-  max_servers = 32
-  min_spare_servers = 3
-  max_spare_servers = 10
-  max_requests_per_server = 0
-}
-
-# MODULE CONFIGURATION
-modules {
-  $INCLUDE ${confdir}/modules/
-  $INCLUDE eap.conf
-  $INCLUDE sql.conf
-  $INCLUDE sql/mysql/counter.conf
-}
-
-# Instantiation
-instantiate {
-  exec
-  expr
-  expiration
-  logintime
-}
-
-# Policies
-$INCLUDE policy.conf
-
-# Include all enabled virtual hosts
-$INCLUDE sites-enabled/
@@ -1,44 +0,0 @@
-authorize {
-  suffix
-  eap {
-    ok = return
-  }
-  files
-}
-
-authenticate {
-  eap
-}
-
-preacct {
-  preprocess
-  acct_unique
-  suffix
-  files
-}
-
-accounting {
-  detail
-  unix
-  radutmp
-  attr_filter.accounting_response
-}
-
-session {
-  radutmp
-}
-
-post-auth {
-  exec
-  Post-Auth-Type REJECT {
-    attr_filter.access_reject
-  }
-}
-
-pre-proxy {
-}
-
-post-proxy {
-  eap
-}
-
@@ -1,32 +0,0 @@
-server inner-tunnel {
-
-authorize {
-	suffix
-	eap {
-		ok = return
-	}
-	files
-}
-
-authenticate {
-	eap
-}
-
-session {
-	radutmp
-}
-
-post-auth {
-	Post-Auth-Type REJECT {
-		attr_filter.access_reject
-	}
-}
-
-pre-proxy {
-}
-
-post-proxy {
-	eap
-}
-
-} # inner-tunnel server block
@@ -1,36 +0,0 @@
-server inner-tunnel-second {
-
-authorize {
-	eap_tnc {
-		ok = return
-	}
-}
-
-authenticate {
-	eap_tnc
-}
-
-session {
-	radutmp
-}
-
-post-auth {
-	if (control:TNC-Status == "Access") {
-		update reply {
-			Tunnel-Type := ESP 
-			Filter-Id := "allow"
-		}
-	}
-	elsif (control:TNC-Status == "Isolate") {
-		update reply {
-			Tunnel-Type := ESP 
-			Filter-Id := "isolate"	
-		}
-	}
-
-	Post-Auth-Type REJECT {
-		attr_filter.access_reject
-	}
-}
-
-} # inner-tunnel-second block
@@ -1,2 +0,0 @@
-carol	Cleartext-Password := "Ar3etTnp"
-dave	Cleartext-Password := "W7R0g3do"
@@ -1,10 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-libimcv {
-  debug_level = 3 
-  plugins {
-    imv-test {
-      rounds = 1 
-    }
-  }
-}
@@ -1,15 +0,0 @@
-# Set root logger level to DEBUG and its appenders to A1 and A2.
-log4j.rootLogger=DEBUG, A1, A2
-
-# A1 is set to be a ConsoleAppender.
-log4j.appender.A1=org.apache.log4j.ConsoleAppender
-log4j.appender.A1.layout=org.apache.log4j.PatternLayout
-log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n
-
-# A2 is set to be a SyslogAppender
-log4j.appender.A2=org.apache.log4j.net.SyslogAppender
-log4j.appender.A2.Facility=DAEMON
-log4j.appender.A2.SyslogHost=localhost
-log4j.appender.A2.Threshold=DEBUG
-log4j.appender.A2.layout=org.apache.log4j.PatternLayout
-log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n
@@ -1,3 +0,0 @@
-#IMV configuration file for TNC@FHH-TNC-Server
-
-IMV "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imv-test.so
@@ -1,24 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tnc 3, imc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_CAROL
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	rightauth=pubkey
-	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "Ar3etTnp"
@@ -1,14 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
-  multiple_authentication=no
-}
-
-libimcv {
-  plugins {
-    imc-test {
-      command = allow
-    }
-  }
-}
@@ -1,3 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -1,24 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tnc 3, imc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_DAVE
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	rightauth=pubkey
-	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "W7R0g3do"
@@ -1,14 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
-  multiple_authentication=no
-}
-
-libimcv {
-  plugins {
-    imc-test {
-      command = isolate
-    }
-  }
-}
@@ -1,3 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -1,84 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-opts="start stop reload"
-
-depend() {
-	before net
-	need logger
-}
-
-start() {
-	ebegin "Starting firewall"
-
-	# enable IP forwarding
-	echo 1 > /proc/sys/net/ipv4/ip_forward
-	
-	# default policy is DROP
-	/sbin/iptables -P INPUT DROP
-	/sbin/iptables -P OUTPUT DROP
-	/sbin/iptables -P FORWARD DROP
-
-	# allow esp
-	iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
-
-	# allow IKE
-	iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-
-	# allow MobIKE
-	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-
-	# allow crl fetch from winnetou
-	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
-
-	# allow RADIUS protocol with alice
-	iptables -A INPUT  -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT
-	iptables -A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT
-
-	# allow ssh
-	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
-	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
-
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping firewall"
-		for a in `cat /proc/net/ip_tables_names`; do
-			/sbin/iptables -F -t $a
-			/sbin/iptables -X -t $a
-	
-			if [ $a == nat ]; then
-				/sbin/iptables -t nat -P PREROUTING ACCEPT
-				/sbin/iptables -t nat -P POSTROUTING ACCEPT
-				/sbin/iptables -t nat -P OUTPUT ACCEPT
-			elif [ $a == mangle ]; then
-				/sbin/iptables -t mangle -P PREROUTING ACCEPT
-				/sbin/iptables -t mangle -P INPUT ACCEPT
-				/sbin/iptables -t mangle -P FORWARD ACCEPT
-				/sbin/iptables -t mangle -P OUTPUT ACCEPT
-				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
-			elif [ $a == filter ]; then
-				/sbin/iptables -t filter -P INPUT ACCEPT
-				/sbin/iptables -t filter -P FORWARD ACCEPT
-				/sbin/iptables -t filter -P OUTPUT ACCEPT
-			fi
-		done
-	eend $?
-}
-
-reload() {
-	ebegin "Flushing firewall"
-		for a in `cat /proc/net/ip_tables_names`; do
-			/sbin/iptables -F -t $a
-			/sbin/iptables -X -t $a
-		done;
-        eend $?
-	start
-}
-
@@ -1,35 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	strictcrlpolicy=no
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn rw-allow
-	rightgroups=allow
-	leftsubnet=10.1.0.0/28
-	also=rw-eap
-	auto=add
-
-conn rw-isolate
-	rightgroups=isolate
-	leftsubnet=10.1.0.16/28
-	also=rw-eap
-	auto=add
-
-conn rw-eap
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftauth=pubkey
-	leftfirewall=yes
-	rightauth=eap-radius
-	rightid=*@strongswan.org
-	rightsendcert=never
-	right=%any
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-: RSA moonKey.pem
@@ -1,13 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-radius updown
-  multiple_authentication=no
-  plugins {
-    eap-radius {
-      secret = gv6URkSs 
-      server = PH_IP_ALICE
-      filter_id = yes
-    }
-  }
-}
@@ -1,8 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop
-dave::ipsec stop
-alice::killall radiusd
-alice::rm /etc/raddb/sites-enabled/inner-tunnel-second
-moon::/etc/init.d/iptables stop 2> /dev/null
-carol::/etc/init.d/iptables stop 2> /dev/null
-dave::/etc/init.d/iptables stop 2> /dev/null
@@ -1,18 +0,0 @@
-moon::/etc/init.d/iptables start 2> /dev/null
-carol::/etc/init.d/iptables start 2> /dev/null
-dave::/etc/init.d/iptables start 2> /dev/null
-alice::ln -s /etc/raddb/sites-available/inner-tunnel-second /etc/raddb/sites-enabled/inner-tunnel-second
-alice::cat /etc/raddb/sites-enabled/inner-tunnel-second
-alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd
-alice::cat /etc/tnc_config
-carol::cat /etc/tnc_config
-dave::cat /etc/tnc_config
-carol::cat /etc/tnc/dummyimc.file
-dave::cat /etc/tnc/dummyimc.file
-moon::ipsec start
-carol::LEAK_DETECTIVE_DISABLE=1 ipsec start
-dave::LEAK_DETECTIVE_DISABLE=1 ipsec start
-carol::sleep 1
-carol::ipsec up home
-dave::ipsec up home
-dave::sleep 1
@@ -1,26 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice venus moon carol winnetou dave"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-v-m-c-w-d.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol dave"
-
-# UML instances on which FreeRadius is started
-#
-RADIUSHOSTS="alice"
-
@@ -1,9 +0,0 @@
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>
-using EAP-TTLS authentication only with the gateway presenting a server certificate and
-the clients doing EAP-MD5 password-based authentication.
-In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
-health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
-<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the
-clients are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets,
-respectively.
-
@@ -1,21 +0,0 @@
-carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
-carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
-carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
-carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/28::YES
-dave::cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES
-dave::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
-dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
-dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.16/28::YES
-moon::cat /var/log/auth.log::policy enforced on peer '[email protected]' is 'allow'::YES
-moon::cat /var/log/daemon.log::policy enforcement point added group membership 'allow'::YES
-moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
-moon::cat /var/log/auth.log::policy enforced on peer '[email protected]' is 'isolate'::YES
-moon::cat /var/log/daemon.log::policy enforcement point added group membership 'isolate'::YES
-moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
-moon::ipsec statusall::rw-allow.*10.1.0.0/28 === 192.168.0.100/32::YES
-moon::ipsec statusall::rw-isolate.*10.1.0.16/28 === 192.168.0.200/32::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_ALICE: icmp_seq=1::NO
-dave::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
-dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
-
@@ -1,23 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_CAROL
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsendcert=never
-	rightsubnet=10.1.0.0/16
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "Ar3etTnp"
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
-  multiple_authentication=no
-}
@@ -1 +0,0 @@
-allow
@@ -1,15 +0,0 @@
-# Set root logger level to DEBUG and its appenders to A1 and A2.
-log4j.rootLogger=DEBUG, A1, A2
-
-# A1 is set to be a ConsoleAppender.
-log4j.appender.A1=org.apache.log4j.ConsoleAppender
-log4j.appender.A1.layout=org.apache.log4j.PatternLayout
-log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n
-
-# A2 is set to be a SyslogAppender
-log4j.appender.A2=org.apache.log4j.net.SyslogAppender
-log4j.appender.A2.Facility=DAEMON
-log4j.appender.A2.SyslogHost=localhost
-log4j.appender.A2.Threshold=DEBUG
-log4j.appender.A2.layout=org.apache.log4j.PatternLayout
-log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n
@@ -1,4 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Dummy"		/usr/local/lib/libdummyimc.so
-#IMC "HostScanner"	/usr/local/lib/libhostscannerimc.so
@@ -1,23 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_DAVE
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsendcert=never
-	rightsubnet=10.1.0.0/16
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "W7R0g3do"
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
-  multiple_authentication=no
-}
@@ -1 +0,0 @@
-isolate
@@ -1,15 +0,0 @@
-# Set root logger level to DEBUG and its appenders to A1 and A2.
-log4j.rootLogger=DEBUG, A1, A2
-
-# A1 is set to be a ConsoleAppender.
-log4j.appender.A1=org.apache.log4j.ConsoleAppender
-log4j.appender.A1.layout=org.apache.log4j.PatternLayout
-log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n
-
-# A2 is set to be a SyslogAppender
-log4j.appender.A2=org.apache.log4j.net.SyslogAppender
-log4j.appender.A2.Facility=DAEMON
-log4j.appender.A2.SyslogHost=localhost
-log4j.appender.A2.Threshold=DEBUG
-log4j.appender.A2.layout=org.apache.log4j.PatternLayout
-log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n
@@ -1,4 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Dummy"		/usr/local/lib/libdummyimc.so
-#IMC "HostScanner"	/usr/local/lib/libhostscannerimc.so
@@ -1,36 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	strictcrlpolicy=no
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn rw-allow
-	rightgroups=allow
-	leftsubnet=10.1.0.0/28
-	also=rw-eap
-	auto=add
-
-conn rw-isolate
-	rightgroups=isolate
-	leftsubnet=10.1.0.16/28
-	also=rw-eap
-	auto=add
-
-conn rw-eap
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftauth=eap-ttls
-	leftfirewall=yes
-	rightauth=eap-ttls
-	rightid=*@strongswan.org
-	rightsendcert=never
-	right=%any
@@ -1,6 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-: RSA moonKey.pem
-
-[email protected] : EAP "Ar3etTnp"
-[email protected]  : EAP "W7R0g3do"
@@ -1,13 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-ttls eap-md5 eap-tnc tnccs-11 tnc-imv updown
-  multiple_authentication=no
-  plugins {
-    eap-ttls {
-      phase2_method = md5
-      phase2_piggyback = yes
-      phase2_tnc = yes
-    }
-  }
-}
@@ -1 +0,0 @@
-1
@@ -1,40 +0,0 @@
-#FTP - File Transfer Protocol
-TCP 20 = whatever
-TCP 21 = close
-
-#SSH - Secure Shell
-TCP 22 = whatever
-
-#Telnet
-TCP 23 = close
-
-#E-Mail
-#
-#SMTP - Simple Mail Transfer Protocol
-TCP  25 = close
-TCP 587 = close
-#POP3 - Post Office Protocol version 3
-TCP 110 = close
-TCP 995 = close
-
-#DNS - Domain Name System
-UDP 53 = close
-TCP 53 = close
-
-#BOOTP/DHCP - Bootstrap Protocol /
-#Dynamic Host Configuration Protocol 
-UDP 67 = close
-#UDP 68 = open
-UDP 68 = whatever
-
-#www - World Wide Web
-#HTTP - Hypertext Transfer Protocol
-TCP  80 = close
-#HTTPS - Hypertext Transfer Protocol Secure
-TCP 443 = close
-
-#examples
-TCP 8080 = close
-TCP 5223 = whatever
-UDP 4444 = close
-UDP  631 = whatever
@@ -1,15 +0,0 @@
-# Set root logger level to DEBUG and its appenders to A1 and A2.
-log4j.rootLogger=DEBUG, A1, A2
-
-# A1 is set to be a ConsoleAppender.
-log4j.appender.A1=org.apache.log4j.ConsoleAppender
-log4j.appender.A1.layout=org.apache.log4j.PatternLayout
-log4j.appender.A1.layout.ConversionPattern=--[IMV] %m%n
-
-# A2 is set to be a SyslogAppender
-log4j.appender.A2=org.apache.log4j.net.SyslogAppender
-log4j.appender.A2.Facility=DAEMON
-log4j.appender.A2.SyslogHost=localhost
-log4j.appender.A2.Threshold=DEBUG
-log4j.appender.A2.layout=org.apache.log4j.PatternLayout
-log4j.appender.A2.layout.ConversionPattern=--[IMV] %m%n
@@ -1,4 +0,0 @@
-#IMV configuration file for strongSwan server 
-
-IMV "Dummy"		/usr/local/lib/libdummyimv.so
-#IMV "HostScanner"	/usr/local/lib/libhostscannerimv.so
@@ -1,6 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop
-dave::ipsec stop
-moon::/etc/init.d/iptables stop 2> /dev/null
-carol::/etc/init.d/iptables stop 2> /dev/null
-dave::/etc/init.d/iptables stop 2> /dev/null
@@ -1,15 +0,0 @@
-moon::/etc/init.d/iptables start 2> /dev/null
-carol::/etc/init.d/iptables start 2> /dev/null
-dave::/etc/init.d/iptables start 2> /dev/null
-moon::cat /etc/tnc_config
-carol::cat /etc/tnc_config
-dave::cat /etc/tnc_config
-carol::cat /etc/tnc/dummyimc.file
-dave::cat /etc/tnc/dummyimc.file
-moon::LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties ipsec start
-carol::LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties ipsec start
-dave::LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties ipsec start
-carol::sleep 1
-carol::ipsec up home
-dave::ipsec up home
-dave::sleep 1
@@ -1,26 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice venus moon carol winnetou dave"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-v-m-c-w-d.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol dave"
-
-# UML instances on which FreeRadius is started
-#
-RADIUSHOSTS=
-
@@ -1,11 +0,0 @@
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>
-using EAP-TTLS authentication only with the gateway presenting a server certificate and
-the clients doing EAP-MD5 password-based authentication.
-In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
-health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 2.0</b> client-server interface
-compliant with <b>RFC 5793 PB-TNC</b>.
-<p>
-<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements
-<b>carol</b> is authenticated successfully and is granted access to the subnet behind
-<b>moon</b> whereas <b>dave</b> fails the layered EAP authentication and is rejected.
-</p>
@@ -1,14 +0,0 @@
-carol::cat /var/log/daemon.log::PB-TNC access recommendation is 'Access Allowed'::YES
-carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES
-carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
-carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/16::YES
-dave::cat /var/log/daemon.log::PB-TNC access recommendation is 'Access Denied'::YES
-dave::cat /var/log/daemon.log::received EAP_FAILURE, EAP authentication failed::YES
-dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.0/16::NO
-moon::cat /var/log/auth.log::policy enforced on peer '[email protected]' is 'allow'::YES
-moon::cat /var/log/daemon.log::policy enforcement point added group membership 'allow'::YES
-moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
-moon::cat /var/log/auth.log::policy enforced on peer '[email protected]' is 'no access'::YES
-moon::cat /var/log/daemon.log::EAP method EAP_TTLS failed for peer [email protected]::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
@@ -1,23 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_CAROL
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsendcert=never
-	rightsubnet=10.1.0.0/16
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "Ar3etTnp"
@@ -1,14 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-20 updown
-  multiple_authentication=no
-  plugins {
-    eap-tnc {
-      protocol = tnccs-2.0
-    }
-    tnc-imc {
-      preferred_language = de, en
-    }
-  }
-}
@@ -1 +0,0 @@
-allow
@@ -1,3 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Dummy" /usr/local/lib/libdummyimc.so
@@ -1,23 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn home
-	left=PH_IP_DAVE
-	[email protected]
-	leftauth=eap
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsendcert=never
-	rightsubnet=10.1.0.0/16
-	auto=add
@@ -1,3 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-[email protected] : EAP "W7R0g3do"
@@ -1,14 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-20 updown
-  multiple_authentication=no
-  plugins {
-    eap-tnc {
-      protocol = tnccs-2.0
-    }
-    tnc-imc {
-      preferred_language = ru, fr, en
-    }
-  }
-}
@@ -1 +0,0 @@
-none
@@ -1,3 +0,0 @@
-#IMC configuration file for strongSwan client 
-
-IMC "Dummy" /usr/local/lib/libdummyimc.so
@@ -1,26 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	strictcrlpolicy=no
-	plutostart=no
-	charondebug="tls 2, tnc 3"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-
-conn rw-eap
-	left=PH_IP_MOON
-	leftsubnet=10.1.0.0/16
-	leftcert=moonCert.pem
-	[email protected]
-	leftauth=eap-ttls
-	leftfirewall=yes
-	rightauth=eap-ttls
-	rightid=*@strongswan.org
-	rightsendcert=never
-	right=%any
-	auto=add
@@ -1,6 +0,0 @@
-# /etc/ipsec.secrets - strongSwan IPsec secrets file
-
-: RSA moonKey.pem
-
-[email protected] : EAP "Ar3etTnp"
-[email protected]  : EAP "W7R0g3do"
@@ -1,19 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-ttls eap-md5 eap-tnc tnccs-20 tnc-imv updown
-  multiple_authentication=no
-  plugins {
-    eap-ttls {
-      phase2_method = md5
-      phase2_piggyback = yes
-      phase2_tnc = yes
-    }
-    eap-tnc {
-      protocol = tnccs-2.0
-    }
-    tnc-imv {
-      recommendation_policy = all
-    }
-  }
-}
@@ -1 +0,0 @@
-0
--- a/Show More
+++ b/Show More