moved TNC scenarios to tnc folder

2011-06-03 00:47:20 +02:00
parent 145a8b04d1
commit 2e60060095
215 changed files with 413 additions and 131 deletions
@@ -0,0 +1,11 @@
+The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>
+using EAP-TTLS authentication only with the gateway presenting a server certificate and
+the clients doing EAP-MD5 password-based authentication.
+In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
+health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
+The Dummy IMC and IMV from the TNC@FHH project are used which communicate over a proprietary protocol.
+<p>
+<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the
+clients are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets,
+respectively.
+
@@ -0,0 +1,19 @@
+carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
+carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
+carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
+carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/28::YES
+dave::cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES
+dave::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
+dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
+dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.16/28::YES
+moon::cat /var/log/daemon.log::added group membership 'allow'::YES
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
+moon::cat /var/log/daemon.log::added group membership 'isolate'::YES
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
+moon::ipsec statusall::rw-allow.*10.1.0.0/28 === 192.168.0.100/32::YES
+moon::ipsec statusall::rw-isolate.*10.1.0.16/28 === 192.168.0.200/32::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+carol::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_ALICE: icmp_seq=1::NO
+dave::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
+
@@ -0,0 +1,23 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_CAROL
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsendcert=never
+	rightsubnet=10.1.0.0/16
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "Ar3etTnp"
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
@@ -0,0 +1 @@
+allow
@@ -0,0 +1,15 @@
+# Set root logger level to DEBUG and its appenders to A1 and A2.
+log4j.rootLogger=DEBUG, A1, A2
+
+# A1 is set to be a ConsoleAppender.
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n
+
+# A2 is set to be a SyslogAppender
+log4j.appender.A2=org.apache.log4j.net.SyslogAppender
+log4j.appender.A2.Facility=DAEMON
+log4j.appender.A2.SyslogHost=localhost
+log4j.appender.A2.Threshold=DEBUG
+log4j.appender.A2.layout=org.apache.log4j.PatternLayout
+log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n
@@ -0,0 +1,4 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Dummy"		/usr/local/lib/libdummyimc.so
+#IMC "HostScanner"	/usr/local/lib/libhostscannerimc.so
@@ -0,0 +1,23 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_DAVE
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsendcert=never
+	rightsubnet=10.1.0.0/16
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "W7R0g3do"
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
@@ -0,0 +1 @@
+isolate
@@ -0,0 +1,15 @@
+# Set root logger level to DEBUG and its appenders to A1 and A2.
+log4j.rootLogger=DEBUG, A1, A2
+
+# A1 is set to be a ConsoleAppender.
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=--[IMC] %m%n
+
+# A2 is set to be a SyslogAppender
+log4j.appender.A2=org.apache.log4j.net.SyslogAppender
+log4j.appender.A2.Facility=DAEMON
+log4j.appender.A2.SyslogHost=localhost
+log4j.appender.A2.Threshold=DEBUG
+log4j.appender.A2.layout=org.apache.log4j.PatternLayout
+log4j.appender.A2.layout.ConversionPattern=--[IMC] %m%n
@@ -0,0 +1,4 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Dummy"		/usr/local/lib/libdummyimc.so
+#IMC "HostScanner"	/usr/local/lib/libhostscannerimc.so
@@ -0,0 +1,36 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	strictcrlpolicy=no
+	plutostart=no
+	charondebug="tnc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn rw-allow
+	rightgroups=allow
+	leftsubnet=10.1.0.0/28
+	also=rw-eap
+	auto=add
+
+conn rw-isolate
+	rightgroups=isolate
+	leftsubnet=10.1.0.16/28
+	also=rw-eap
+	auto=add
+
+conn rw-eap
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	[email protected]
+	leftauth=eap-ttls
+	leftfirewall=yes
+	rightauth=eap-ttls
+	rightid=*@strongswan.org
+	rightsendcert=never
+	right=%any
@@ -0,0 +1,6 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+: RSA moonKey.pem
+
+[email protected] : EAP "Ar3etTnp"
+[email protected]  : EAP "W7R0g3do"
@@ -0,0 +1,13 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-ttls eap-md5 eap-tnc tnccs-11 tnc-imv updown
+  multiple_authentication=no
+  plugins {
+    eap-ttls {
+      phase2_method = md5
+      phase2_piggyback = yes
+      phase2_tnc = yes
+    }
+  }
+}
@@ -0,0 +1 @@
+1
@@ -0,0 +1,40 @@
+#FTP - File Transfer Protocol
+TCP 20 = whatever
+TCP 21 = close
+
+#SSH - Secure Shell
+TCP 22 = whatever
+
+#Telnet
+TCP 23 = close
+
+#E-Mail
+#
+#SMTP - Simple Mail Transfer Protocol
+TCP  25 = close
+TCP 587 = close
+#POP3 - Post Office Protocol version 3
+TCP 110 = close
+TCP 995 = close
+
+#DNS - Domain Name System
+UDP 53 = close
+TCP 53 = close
+
+#BOOTP/DHCP - Bootstrap Protocol /
+#Dynamic Host Configuration Protocol 
+UDP 67 = close
+#UDP 68 = open
+UDP 68 = whatever
+
+#www - World Wide Web
+#HTTP - Hypertext Transfer Protocol
+TCP  80 = close
+#HTTPS - Hypertext Transfer Protocol Secure
+TCP 443 = close
+
+#examples
+TCP 8080 = close
+TCP 5223 = whatever
+UDP 4444 = close
+UDP  631 = whatever
@@ -0,0 +1,15 @@
+# Set root logger level to DEBUG and its appenders to A1 and A2.
+log4j.rootLogger=DEBUG, A1, A2
+
+# A1 is set to be a ConsoleAppender.
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=--[IMV] %m%n
+
+# A2 is set to be a SyslogAppender
+log4j.appender.A2=org.apache.log4j.net.SyslogAppender
+log4j.appender.A2.Facility=DAEMON
+log4j.appender.A2.SyslogHost=localhost
+log4j.appender.A2.Threshold=DEBUG
+log4j.appender.A2.layout=org.apache.log4j.PatternLayout
+log4j.appender.A2.layout.ConversionPattern=--[IMV] %m%n
@@ -0,0 +1,4 @@
+#IMV configuration file for strongSwan server 
+
+IMV "Dummy"		/usr/local/lib/libdummyimv.so
+#IMV "HostScanner"	/usr/local/lib/libhostscannerimv.so
@@ -0,0 +1,6 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null
@@ -0,0 +1,15 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+moon::cat /etc/tnc_config
+carol::cat /etc/tnc_config
+dave::cat /etc/tnc_config
+carol::cat /etc/tnc/dummyimc.file
+dave::cat /etc/tnc/dummyimc.file
+moon::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties ipsec start
+carol::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties ipsec start
+dave::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home
+dave::sleep 1
@@ -0,0 +1,26 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice venus moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-v-m-c-w-d.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"
+
+# UML instances on which FreeRadius is started
+#
+RADIUSHOSTS=
+
@@ -0,0 +1,13 @@
+The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>.
+At the outset the gateway authenticates itself to the clients by sending an IKEv2
+<b>RSA signature</b> accompanied by a certificate.
+<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to
+the FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate.
+The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>.
+In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
+health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
+The IMC and IMV communicate using the <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>.
+<p>
+<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements <b>carol</b>
+is authenticated successfully and is granted access to the subnet behind <b>moon</b> whereas 
+<b>dave</b> fails the layered EAP authentication and is rejected.
@@ -0,0 +1,14 @@
+carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
+carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
+carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established::YES
+carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/16::YES
+dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
+dave::cat /var/log/daemon.log::TNCCS-Recommendation.*none::YES
+dave::cat /var/log/daemon.log::received EAP_FAILURE, EAP authentication failed::YES
+dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.0/16::NO
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES         
+moon::cat /var/log/daemon.log::RADIUS authentication of '[email protected]' failed::YES
+moon::cat /var/log/daemon.log::EAP method EAP_TTLS failed for peer [email protected]::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
+
@@ -0,0 +1,4 @@
+client PH_IP_MOON1 {
+  secret    = gv6URkSs 
+  shortname = moon
+}
@@ -0,0 +1,2 @@
+$INCLUDE	/usr/share/freeradius/dictionary
+$INCLUDE	/etc/raddb/dictionary.tnc
@@ -0,0 +1,5 @@
+ATTRIBUTE	TNC-Status	3001	integer
+
+VALUE	TNC-Status	Access	0 
+VALUE	TNC-Status	Isolate	1
+VALUE	TNC-Status	None	2
@@ -0,0 +1,25 @@
+eap {
+  md5 {
+  }
+  default_eap_type = ttls
+  tls {
+    private_key_file = /etc/raddb/certs/aaaKey.pem
+    certificate_file = /etc/raddb/certs/aaaCert.pem
+    CA_file = /etc/raddb/certs/strongswanCert.pem
+    cipher_list = "DEFAULT"
+    dh_file = /etc/raddb/certs/dh
+    random_file = /etc/raddb/certs/random
+  }
+  ttls {
+    default_eap_type = md5
+    use_tunneled_reply = yes
+    virtual_server = "inner-tunnel"
+    tnc_virtual_server = "inner-tunnel-second"
+  }
+}
+
+eap eap_tnc {
+      default_eap_type = tnc
+      tnc {
+      }
+}
@@ -0,0 +1,5 @@
+realm strongswan.org {
+  type     = radius
+  authhost = LOCAL
+  accthost = LOCAL
+}
@@ -0,0 +1,120 @@
+# radiusd.conf	-- FreeRADIUS server configuration file.
+
+prefix = /usr
+exec_prefix = ${prefix}
+sysconfdir = /etc
+localstatedir = /var
+sbindir = ${exec_prefix}/sbin
+logdir = ${localstatedir}/log/radius
+raddbdir = ${sysconfdir}/raddb
+radacctdir = ${logdir}/radacct
+
+#  name of the running server.  See also the "-n" command-line option.
+name = radiusd
+
+#  Location of config and logfiles.
+confdir = ${raddbdir}
+run_dir = ${localstatedir}/run/radiusd
+
+# Should likely be ${localstatedir}/lib/radiusd
+db_dir = ${raddbdir}
+
+# libdir: Where to find the rlm_* modules.
+libdir = ${exec_prefix}/lib
+
+#  pidfile: Where to place the PID of the RADIUS server.
+pidfile = ${run_dir}/${name}.pid
+
+#  max_request_time: The maximum time (in seconds) to handle a request.
+max_request_time = 30
+
+#  cleanup_delay: The time to wait (in seconds) before cleaning up
+cleanup_delay = 5
+
+#  max_requests: The maximum number of requests which the server keeps
+max_requests = 1024
+
+#  listen: Make the server listen on a particular IP address, and send
+listen {
+  type = auth
+  ipaddr = PH_IP_ALICE 
+  port = 0
+}
+
+#  This second "listen" section is for listening on the accounting
+#  port, too.
+#
+listen {
+  type  = acct
+  ipaddr = PH_IP_ALICE 
+  port = 0
+}
+
+#  hostname_lookups: Log the names of clients or just their IP addresses
+hostname_lookups = no
+
+#  Core dumps are a bad thing.  This should only be set to 'yes'
+allow_core_dumps = no
+
+#  Regular expressions
+regular_expressions = yes
+extended_expressions = yes
+
+#  Logging section.  The various "log_*" configuration items
+log {
+  destination = files
+  file = ${logdir}/radius.log
+  syslog_facility = daemon
+  stripped_names = no
+  auth = yes 
+  auth_badpass = yes 
+  auth_goodpass = yes 
+}
+
+#  The program to execute to do concurrency checks.
+checkrad = ${sbindir}/checkrad
+
+#  Security considerations
+security {
+  max_attributes = 200
+  reject_delay = 1
+  status_server = yes
+}
+
+# PROXY CONFIGURATION
+proxy_requests = yes
+$INCLUDE proxy.conf
+
+# CLIENTS CONFIGURATION
+$INCLUDE clients.conf
+
+# THREAD POOL CONFIGURATION
+thread pool {
+  start_servers = 5
+  max_servers = 32
+  min_spare_servers = 3
+  max_spare_servers = 10
+  max_requests_per_server = 0
+}
+
+# MODULE CONFIGURATION
+modules {
+  $INCLUDE ${confdir}/modules/
+  $INCLUDE eap.conf
+  $INCLUDE sql.conf
+  $INCLUDE sql/mysql/counter.conf
+}
+
+# Instantiation
+instantiate {
+  exec
+  expr
+  expiration
+  logintime
+}
+
+# Policies
+$INCLUDE policy.conf
+
+# Include all enabled virtual hosts
+$INCLUDE sites-enabled/
@@ -0,0 +1,44 @@
+authorize {
+  suffix
+  eap {
+    ok = return
+  }
+  files
+}
+
+authenticate {
+  eap
+}
+
+preacct {
+  preprocess
+  acct_unique
+  suffix
+  files
+}
+
+accounting {
+  detail
+  unix
+  radutmp
+  attr_filter.accounting_response
+}
+
+session {
+  radutmp
+}
+
+post-auth {
+  exec
+  Post-Auth-Type REJECT {
+    attr_filter.access_reject
+  }
+}
+
+pre-proxy {
+}
+
+post-proxy {
+  eap
+}
+
@@ -0,0 +1,32 @@
+server inner-tunnel {
+
+authorize {
+	suffix
+	eap {
+		ok = return
+	}
+	files
+}
+
+authenticate {
+	eap
+}
+
+session {
+	radutmp
+}
+
+post-auth {
+	Post-Auth-Type REJECT {
+		attr_filter.access_reject
+	}
+}
+
+pre-proxy {
+}
+
+post-proxy {
+	eap
+}
+
+} # inner-tunnel server block
@@ -0,0 +1,23 @@
+server inner-tunnel-second {
+
+authorize {
+	eap_tnc {
+		ok = return
+	}
+}
+
+authenticate {
+	eap_tnc
+}
+
+session {
+	radutmp
+}
+
+post-auth {
+	Post-Auth-Type REJECT {
+		attr_filter.access_reject
+	}
+}
+
+} # inner-tunnel-second block
@@ -0,0 +1,2 @@
+carol	Cleartext-Password := "Ar3etTnp"
+dave	Cleartext-Password := "W7R0g3do"
@@ -0,0 +1,5 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+libimcv {
+  debug_level = 3 
+}
@@ -0,0 +1,15 @@
+# Set root logger level to DEBUG and its appenders to A1 and A2.
+log4j.rootLogger=DEBUG, A1, A2
+
+# A1 is set to be a ConsoleAppender.
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n
+
+# A2 is set to be a SyslogAppender
+log4j.appender.A2=org.apache.log4j.net.SyslogAppender
+log4j.appender.A2.Facility=DAEMON
+log4j.appender.A2.SyslogHost=localhost
+log4j.appender.A2.Threshold=DEBUG
+log4j.appender.A2.layout=org.apache.log4j.PatternLayout
+log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n
@@ -0,0 +1,3 @@
+#IMV configuration file for strongSwan client 
+
+IMV "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imv-test.so
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3, imc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_CAROL
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsubnet=10.1.0.0/16
+	rightauth=pubkey
+	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "Ar3etTnp"
@@ -0,0 +1,14 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
+
+libimcv {
+  plugins {
+    imc-test {
+      command = allow
+    }
+  }
+}
@@ -0,0 +1,3 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3, imc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_DAVE
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsubnet=10.1.0.0/16
+	rightauth=pubkey
+	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "W7R0g3do"
@@ -0,0 +1,6 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
@@ -0,0 +1,3 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -0,0 +1,84 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop reload"
+
+depend() {
+	before net
+	need logger
+}
+
+start() {
+	ebegin "Starting firewall"
+
+	# enable IP forwarding
+	echo 1 > /proc/sys/net/ipv4/ip_forward
+	
+	# default policy is DROP
+	/sbin/iptables -P INPUT DROP
+	/sbin/iptables -P OUTPUT DROP
+	/sbin/iptables -P FORWARD DROP
+
+	# allow esp
+	iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
+
+	# allow IKE
+	iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
+
+	# allow MobIKE
+	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
+
+	# allow crl fetch from winnetou
+	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+
+	# allow RADIUS protocol with alice
+	iptables -A INPUT  -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT
+	iptables -A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT
+
+	# allow ssh
+	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
+	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
+
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+	
+			if [ $a == nat ]; then
+				/sbin/iptables -t nat -P PREROUTING ACCEPT
+				/sbin/iptables -t nat -P POSTROUTING ACCEPT
+				/sbin/iptables -t nat -P OUTPUT ACCEPT
+			elif [ $a == mangle ]; then
+				/sbin/iptables -t mangle -P PREROUTING ACCEPT
+				/sbin/iptables -t mangle -P INPUT ACCEPT
+				/sbin/iptables -t mangle -P FORWARD ACCEPT
+				/sbin/iptables -t mangle -P OUTPUT ACCEPT
+				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
+			elif [ $a == filter ]; then
+				/sbin/iptables -t filter -P INPUT ACCEPT
+				/sbin/iptables -t filter -P FORWARD ACCEPT
+				/sbin/iptables -t filter -P OUTPUT ACCEPT
+			fi
+		done
+	eend $?
+}
+
+reload() {
+	ebegin "Flushing firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+		done;
+        eend $?
+	start
+}
+
@@ -0,0 +1,25 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn rw-eap
+	left=PH_IP_MOON
+	leftsubnet=10.1.0.0/16
+	leftcert=moonCert.pem
+	[email protected]
+	leftauth=pubkey
+	leftfirewall=yes
+	rightauth=eap-radius
+	rightid=*@strongswan.org
+	rightsendcert=never
+	right=%any
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+: RSA moonKey.pem
@@ -0,0 +1,12 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-radius updown
+  multiple_authentication=no
+  plugins {
+    eap-radius {
+      secret = gv6URkSs 
+      server = PH_IP_ALICE
+    }
+  }
+}
@@ -0,0 +1,8 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+alice::killall radiusd
+alice::rm /etc/raddb/sites-enabled/inner-tunnel-second
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null
@@ -0,0 +1,13 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+alice::ln -s /etc/raddb/sites-available/inner-tunnel-second /etc/raddb/sites-enabled/inner-tunnel-second
+alice::cat /etc/raddb/sites-enabled/inner-tunnel-second
+alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd
+moon::ipsec start
+carol::LEAK_DETECTIVE_DISABLE=1 ipsec start
+dave::LEAK_DETECTIVE_DISABLE=1 ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home
+dave::sleep 1
@@ -0,0 +1,26 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-c-w-d.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"
+
+# UML instances on which FreeRadius is started
+#
+RADIUSHOSTS="alice"
+
@@ -0,0 +1,12 @@
+The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>.
+At the outset the gateway authenticates itself to the clients by sending an IKEv2
+<b>RSA signature</b> accompanied by a certificate.
+<b>carol</b> and <b>dave</b> then set up an <b>EAP-TTLS</b> tunnel each via <b>moon</b> to
+the FreeRADIUS server <b>alice</b> authenticated by an X.509 AAA certificate.
+The strong EAP-TTLS tunnel protects the ensuing weak client authentication based on <b>EAP-MD5</b>.
+In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
+health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
+The IMC and IMV communicate using the <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>.
+<p>
+<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the clients
+are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets, respectively.
@@ -0,0 +1,19 @@
+carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
+carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
+carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
+carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/28::YES
+dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with RSA signature successful::YES
+dave::cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES
+dave::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
+dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.16/28::YES
+moon::cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'allow'::YES
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES            
+moon::cat /var/log/daemon.log::received RADIUS attribute Filter-Id: 'isolate'::YES
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
+moon::ipsec statusall::rw-allow.*10.1.0.0/28 === 192.168.0.100/32::YES
+moon::ipsec statusall::rw-isolate.*10.1.0.16/28 === 192.168.0.200/32::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+carol::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_ALICE: icmp_seq=1::NO
+dave::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
+
@@ -0,0 +1,4 @@
+client PH_IP_MOON1 {
+  secret    = gv6URkSs 
+  shortname = moon
+}
@@ -0,0 +1,2 @@
+$INCLUDE	/usr/share/freeradius/dictionary
+$INCLUDE	/etc/raddb/dictionary.tnc
@@ -0,0 +1,5 @@
+ATTRIBUTE	TNC-Status	3001	integer
+
+VALUE	TNC-Status	Access	0 
+VALUE	TNC-Status	Isolate	1
+VALUE	TNC-Status	None	2
@@ -0,0 +1,25 @@
+eap {
+  md5 {
+  }
+  default_eap_type = ttls
+  tls {
+    private_key_file = /etc/raddb/certs/aaaKey.pem
+    certificate_file = /etc/raddb/certs/aaaCert.pem
+    CA_file = /etc/raddb/certs/strongswanCert.pem
+    cipher_list = "DEFAULT"
+    dh_file = /etc/raddb/certs/dh
+    random_file = /etc/raddb/certs/random
+  }
+  ttls {
+    default_eap_type = md5
+    use_tunneled_reply = yes
+    virtual_server = "inner-tunnel"
+    tnc_virtual_server = "inner-tunnel-second"
+  }
+}
+
+eap eap_tnc {
+      default_eap_type = tnc
+      tnc {
+      }
+}
@@ -0,0 +1,5 @@
+realm strongswan.org {
+  type     = radius
+  authhost = LOCAL
+  accthost = LOCAL
+}
@@ -0,0 +1,120 @@
+# radiusd.conf	-- FreeRADIUS server configuration file.
+
+prefix = /usr
+exec_prefix = ${prefix}
+sysconfdir = /etc
+localstatedir = /var
+sbindir = ${exec_prefix}/sbin
+logdir = ${localstatedir}/log/radius
+raddbdir = ${sysconfdir}/raddb
+radacctdir = ${logdir}/radacct
+
+#  name of the running server.  See also the "-n" command-line option.
+name = radiusd
+
+#  Location of config and logfiles.
+confdir = ${raddbdir}
+run_dir = ${localstatedir}/run/radiusd
+
+# Should likely be ${localstatedir}/lib/radiusd
+db_dir = ${raddbdir}
+
+# libdir: Where to find the rlm_* modules.
+libdir = ${exec_prefix}/lib
+
+#  pidfile: Where to place the PID of the RADIUS server.
+pidfile = ${run_dir}/${name}.pid
+
+#  max_request_time: The maximum time (in seconds) to handle a request.
+max_request_time = 30
+
+#  cleanup_delay: The time to wait (in seconds) before cleaning up
+cleanup_delay = 5
+
+#  max_requests: The maximum number of requests which the server keeps
+max_requests = 1024
+
+#  listen: Make the server listen on a particular IP address, and send
+listen {
+  type = auth
+  ipaddr = PH_IP_ALICE 
+  port = 0
+}
+
+#  This second "listen" section is for listening on the accounting
+#  port, too.
+#
+listen {
+  type  = acct
+  ipaddr = PH_IP_ALICE 
+  port = 0
+}
+
+#  hostname_lookups: Log the names of clients or just their IP addresses
+hostname_lookups = no
+
+#  Core dumps are a bad thing.  This should only be set to 'yes'
+allow_core_dumps = no
+
+#  Regular expressions
+regular_expressions = yes
+extended_expressions = yes
+
+#  Logging section.  The various "log_*" configuration items
+log {
+  destination = files
+  file = ${logdir}/radius.log
+  syslog_facility = daemon
+  stripped_names = no
+  auth = yes 
+  auth_badpass = yes 
+  auth_goodpass = yes 
+}
+
+#  The program to execute to do concurrency checks.
+checkrad = ${sbindir}/checkrad
+
+#  Security considerations
+security {
+  max_attributes = 200
+  reject_delay = 1
+  status_server = yes
+}
+
+# PROXY CONFIGURATION
+proxy_requests = yes
+$INCLUDE proxy.conf
+
+# CLIENTS CONFIGURATION
+$INCLUDE clients.conf
+
+# THREAD POOL CONFIGURATION
+thread pool {
+  start_servers = 5
+  max_servers = 32
+  min_spare_servers = 3
+  max_spare_servers = 10
+  max_requests_per_server = 0
+}
+
+# MODULE CONFIGURATION
+modules {
+  $INCLUDE ${confdir}/modules/
+  $INCLUDE eap.conf
+  $INCLUDE sql.conf
+  $INCLUDE sql/mysql/counter.conf
+}
+
+# Instantiation
+instantiate {
+  exec
+  expr
+  expiration
+  logintime
+}
+
+# Policies
+$INCLUDE policy.conf
+
+# Include all enabled virtual hosts
+$INCLUDE sites-enabled/
@@ -0,0 +1,44 @@
+authorize {
+  suffix
+  eap {
+    ok = return
+  }
+  files
+}
+
+authenticate {
+  eap
+}
+
+preacct {
+  preprocess
+  acct_unique
+  suffix
+  files
+}
+
+accounting {
+  detail
+  unix
+  radutmp
+  attr_filter.accounting_response
+}
+
+session {
+  radutmp
+}
+
+post-auth {
+  exec
+  Post-Auth-Type REJECT {
+    attr_filter.access_reject
+  }
+}
+
+pre-proxy {
+}
+
+post-proxy {
+  eap
+}
+
@@ -0,0 +1,32 @@
+server inner-tunnel {
+
+authorize {
+	suffix
+	eap {
+		ok = return
+	}
+	files
+}
+
+authenticate {
+	eap
+}
+
+session {
+	radutmp
+}
+
+post-auth {
+	Post-Auth-Type REJECT {
+		attr_filter.access_reject
+	}
+}
+
+pre-proxy {
+}
+
+post-proxy {
+	eap
+}
+
+} # inner-tunnel server block
@@ -0,0 +1,36 @@
+server inner-tunnel-second {
+
+authorize {
+	eap_tnc {
+		ok = return
+	}
+}
+
+authenticate {
+	eap_tnc
+}
+
+session {
+	radutmp
+}
+
+post-auth {
+	if (control:TNC-Status == "Access") {
+		update reply {
+			Tunnel-Type := ESP 
+			Filter-Id := "allow"
+		}
+	}
+	elsif (control:TNC-Status == "Isolate") {
+		update reply {
+			Tunnel-Type := ESP 
+			Filter-Id := "isolate"	
+		}
+	}
+
+	Post-Auth-Type REJECT {
+		attr_filter.access_reject
+	}
+}
+
+} # inner-tunnel-second block
@@ -0,0 +1,2 @@
+carol	Cleartext-Password := "Ar3etTnp"
+dave	Cleartext-Password := "W7R0g3do"
@@ -0,0 +1,10 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+libimcv {
+  debug_level = 3 
+  plugins {
+    imv-test {
+      rounds = 1 
+    }
+  }
+}
@@ -0,0 +1,15 @@
+# Set root logger level to DEBUG and its appenders to A1 and A2.
+log4j.rootLogger=DEBUG, A1, A2
+
+# A1 is set to be a ConsoleAppender.
+log4j.appender.A1=org.apache.log4j.ConsoleAppender
+log4j.appender.A1.layout=org.apache.log4j.PatternLayout
+log4j.appender.A1.layout.ConversionPattern=[FHH] %m%n
+
+# A2 is set to be a SyslogAppender
+log4j.appender.A2=org.apache.log4j.net.SyslogAppender
+log4j.appender.A2.Facility=DAEMON
+log4j.appender.A2.SyslogHost=localhost
+log4j.appender.A2.Threshold=DEBUG
+log4j.appender.A2.layout=org.apache.log4j.PatternLayout
+log4j.appender.A2.layout.ConversionPattern=[FHH] %m%n
@@ -0,0 +1,3 @@
+#IMV configuration file for TNC@FHH-TNC-Server
+
+IMV "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imv-test.so
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3, imc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_CAROL
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsubnet=10.1.0.0/16
+	rightauth=pubkey
+	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "Ar3etTnp"
@@ -0,0 +1,14 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
+
+libimcv {
+  plugins {
+    imc-test {
+      command = allow
+    }
+  }
+}
@@ -0,0 +1,3 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3, imc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_DAVE
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsubnet=10.1.0.0/16
+	rightauth=pubkey
+	aaa_identity="C=CH, O=Linux strongSwan, CN=aaa.strongswan.org"
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "W7R0g3do"
@@ -0,0 +1,14 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
+
+libimcv {
+  plugins {
+    imc-test {
+      command = isolate
+    }
+  }
+}
@@ -0,0 +1,3 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -0,0 +1,84 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop reload"
+
+depend() {
+	before net
+	need logger
+}
+
+start() {
+	ebegin "Starting firewall"
+
+	# enable IP forwarding
+	echo 1 > /proc/sys/net/ipv4/ip_forward
+	
+	# default policy is DROP
+	/sbin/iptables -P INPUT DROP
+	/sbin/iptables -P OUTPUT DROP
+	/sbin/iptables -P FORWARD DROP
+
+	# allow esp
+	iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
+
+	# allow IKE
+	iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
+
+	# allow MobIKE
+	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
+
+	# allow crl fetch from winnetou
+	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+
+	# allow RADIUS protocol with alice
+	iptables -A INPUT  -i eth1 -p udp --sport 1812 -s PH_IP_ALICE -j ACCEPT
+	iptables -A OUTPUT -o eth1 -p udp --dport 1812 -d PH_IP_ALICE -j ACCEPT
+
+	# allow ssh
+	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
+	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
+
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+	
+			if [ $a == nat ]; then
+				/sbin/iptables -t nat -P PREROUTING ACCEPT
+				/sbin/iptables -t nat -P POSTROUTING ACCEPT
+				/sbin/iptables -t nat -P OUTPUT ACCEPT
+			elif [ $a == mangle ]; then
+				/sbin/iptables -t mangle -P PREROUTING ACCEPT
+				/sbin/iptables -t mangle -P INPUT ACCEPT
+				/sbin/iptables -t mangle -P FORWARD ACCEPT
+				/sbin/iptables -t mangle -P OUTPUT ACCEPT
+				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
+			elif [ $a == filter ]; then
+				/sbin/iptables -t filter -P INPUT ACCEPT
+				/sbin/iptables -t filter -P FORWARD ACCEPT
+				/sbin/iptables -t filter -P OUTPUT ACCEPT
+			fi
+		done
+	eend $?
+}
+
+reload() {
+	ebegin "Flushing firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+		done;
+        eend $?
+	start
+}
+
@@ -0,0 +1,35 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn rw-allow
+	rightgroups=allow
+	leftsubnet=10.1.0.0/28
+	also=rw-eap
+	auto=add
+
+conn rw-isolate
+	rightgroups=isolate
+	leftsubnet=10.1.0.16/28
+	also=rw-eap
+	auto=add
+
+conn rw-eap
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	[email protected]
+	leftauth=pubkey
+	leftfirewall=yes
+	rightauth=eap-radius
+	rightid=*@strongswan.org
+	rightsendcert=never
+	right=%any
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+: RSA moonKey.pem
@@ -0,0 +1,13 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-radius updown
+  multiple_authentication=no
+  plugins {
+    eap-radius {
+      secret = gv6URkSs 
+      server = PH_IP_ALICE
+      filter_id = yes
+    }
+  }
+}
@@ -0,0 +1,8 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+alice::killall radiusd
+alice::rm /etc/raddb/sites-enabled/inner-tunnel-second
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null
@@ -0,0 +1,16 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+alice::ln -s /etc/raddb/sites-available/inner-tunnel-second /etc/raddb/sites-enabled/inner-tunnel-second
+alice::cat /etc/raddb/sites-enabled/inner-tunnel-second
+alice::LEAK_DETECTIVE_DISABLE=1 LOG4CXX_CONFIGURATION=/etc/tnc/log4cxx.properties radiusd
+alice::cat /etc/tnc_config
+carol::cat /etc/tnc_config
+dave::cat /etc/tnc_config
+moon::ipsec start
+carol::LEAK_DETECTIVE_DISABLE=1 ipsec start
+dave::LEAK_DETECTIVE_DISABLE=1 ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home
+dave::sleep 1
@@ -0,0 +1,26 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice venus moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-v-m-c-w-d.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"
+
+# UML instances on which FreeRadius is started
+#
+RADIUSHOSTS="alice"
+
@@ -0,0 +1,11 @@
+The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>
+using EAP-TTLS authentication only with the gateway presenting a server certificate and
+the clients doing EAP-MD5 password-based authentication.
+In a next step the EAP-TNC protocol is used within the EAP-TTLS tunnel to determine the
+health of <b>carol</b> and <b>dave</b> via the <b>IF-TNCCS 1.1</b> client-server interface.
+The IMC and IMV communicate using the <b>IF-M</b> protocol defined by <b>RFC 5792 PA-TNC</b>.
+<p>
+<b>carol</b> passes the health test and <b>dave</b> fails. Based on these measurements the
+clients are connected by gateway <b>moon</b> to the "rw-allow" and "rw-isolate" subnets,
+respectively.
+
@@ -0,0 +1,19 @@
+carol::cat /var/log/daemon.log::TNCCS-Recommendation.*allow::YES
+carol::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
+carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
+carol::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.100/32 === 10.1.0.0/28::YES
+dave::cat /var/log/daemon.log::TNCCS-Recommendation.*isolate::YES
+dave::cat /var/log/daemon.log::EAP method EAP_TTLS succeeded, MSK established ::YES
+dave::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP successful::YES
+dave::cat /var/log/daemon.log::CHILD_SA home{1} established.*TS 192.168.0.200/32 === 10.1.0.16/28::YES
+moon::cat /var/log/daemon.log::added group membership 'allow'::YES
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
+moon::cat /var/log/daemon.log::added group membership 'isolate'::YES
+moon::cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
+moon::ipsec statusall::rw-allow.*10.1.0.0/28 === 192.168.0.100/32::YES
+moon::ipsec statusall::rw-isolate.*10.1.0.16/28 === 192.168.0.200/32::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+carol::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_ALICE: icmp_seq=1::NO
+dave::ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_VENUS: icmp_seq=1::NO
+
@@ -0,0 +1,23 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3, imc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_CAROL
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsendcert=never
+	rightsubnet=10.1.0.0/16
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "Ar3etTnp"
@@ -0,0 +1,14 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
+
+libimcv {
+  plugins {
+    imc-test {
+      command = allow
+    }
+  }
+}
@@ -0,0 +1,3 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -0,0 +1,23 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+	charondebug="tnc 3, imc 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn home
+	left=PH_IP_DAVE
+	[email protected]
+	leftauth=eap
+	leftfirewall=yes
+	right=PH_IP_MOON
+	[email protected]
+	rightsendcert=never
+	rightsubnet=10.1.0.0/16
+	auto=add
@@ -0,0 +1,3 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+[email protected] : EAP "W7R0g3do"
@@ -0,0 +1,14 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-md5 eap-ttls eap-tnc tnc-imc tnccs-11 updown
+  multiple_authentication=no
+}
+
+libimcv {
+  plugins {
+    imc-test {
+      command = isolate
+    }
+  }
+}
@@ -0,0 +1,3 @@
+#IMC configuration file for strongSwan client 
+
+IMC "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imc-test.so
@@ -0,0 +1,36 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	strictcrlpolicy=no
+	plutostart=no
+	charondebug="tnc 3, imv 3"
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev2
+
+conn rw-allow
+	rightgroups=allow
+	leftsubnet=10.1.0.0/28
+	also=rw-eap
+	auto=add
+
+conn rw-isolate
+	rightgroups=isolate
+	leftsubnet=10.1.0.16/28
+	also=rw-eap
+	auto=add
+
+conn rw-eap
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	[email protected]
+	leftauth=eap-ttls
+	leftfirewall=yes
+	rightauth=eap-ttls
+	rightid=*@strongswan.org
+	rightsendcert=never
+	right=%any
@@ -0,0 +1,6 @@
+# /etc/ipsec.secrets - strongSwan IPsec secrets file
+
+: RSA moonKey.pem
+
+[email protected] : EAP "Ar3etTnp"
+[email protected]  : EAP "W7R0g3do"
@@ -0,0 +1,21 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+charon {
+  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default eap-identity eap-ttls eap-md5 eap-tnc tnccs-11 tnc-imv updown
+  multiple_authentication=no
+  plugins {
+    eap-ttls {
+      phase2_method = md5
+      phase2_piggyback = yes
+      phase2_tnc = yes
+    }
+  }
+}
+
+libimcv {
+  plugins {
+    imv-test {
+      rounds = 1
+    }
+  }
+}
@@ -0,0 +1,3 @@
+#IMV configuration file for strongSwan client 
+
+IMV "Test" /usr/local/libexec/ipsec/plugins/libstrongswan-imv-test.so
@@ -0,0 +1,6 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+dave::/etc/init.d/iptables stop 2> /dev/null
@@ -0,0 +1,13 @@
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+dave::/etc/init.d/iptables start 2> /dev/null
+moon::cat /etc/tnc_config
+carol::cat /etc/tnc_config
+dave::cat /etc/tnc_config
+moon::LEAK_DETECTIVE_DISABLE=1 ipsec start
+carol::LEAK_DETECTIVE_DISABLE=1 ipsec start
+dave::LEAK_DETECTIVE_DISABLE=1 ipsec start
+carol::sleep 1
+carol::ipsec up home
+dave::ipsec up home
+dave::sleep 1
--- a/Show More
+++ b/Show More