deleted IKEv1 charon-pluto interoperability scenarios

testing/tests/gcrypt-ikev1-c-p/alg-serpent/description.txt

@@ -1,4 +0,0 @@
-Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the strong cipher suite
-<b>SERPENT_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and 
-<b>SERPENT_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.

testing/tests/gcrypt-ikev1-c-p/alg-serpent/evaltest.dat

@@ -1,13 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
-carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512_256::YES
-moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::SERPENT_CBC_256/HMAC_SHA2_512_256,::YES
-moon:: ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
-carol::ip xfrm state::enc cbc(serpent)::YES
-moon:: ip xfrm state::enc cbc(serpent)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES

testing/tests/gcrypt-ikev1-c-p/alg-serpent/hosts/carol/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=serpent256-sha512-modp4096!
-	esp=serpent256-sha512!
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-c-p/alg-serpent/hosts/carol/etc/strongswan.conf

@@ -1,10 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
-  send_vendor_id = yes
-}
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-c-p/alg-serpent/hosts/moon/etc/ipsec.conf

@@ -1,26 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-       
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=serpent256-sha2_512-modp4096!
-	esp=serpent256-sha2_512!
-	pfs=no
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-c-p/alg-serpent/hosts/moon/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-c-p/alg-serpent/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/gcrypt-ikev1-c-p/alg-serpent/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home

testing/tests/gcrypt-ikev1-c-p/alg-serpent/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/gcrypt-ikev1-c-p/alg-twofish/description.txt

@@ -1,4 +0,0 @@
-Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the strong cipher suite
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and 
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.

testing/tests/gcrypt-ikev1-c-p/alg-twofish/evaltest.dat

@@ -1,13 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
-carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512_256::YES
-moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::TWOFISH_CBC_256/HMAC_SHA2_512_256,::YES
-moon:: ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
-carol::ip xfrm state::enc cbc(twofish)::YES
-moon:: ip xfrm state::enc cbc(twofish)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES

testing/tests/gcrypt-ikev1-c-p/alg-twofish/hosts/carol/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=twofish256-sha512-modp4096!
-	esp=twofish256-sha512!
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-c-p/alg-twofish/hosts/carol/etc/strongswan.conf

@@ -1,10 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
-  send_vendor_id = yes
-}
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-c-p/alg-twofish/hosts/moon/etc/ipsec.conf

@@ -1,26 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-       
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=twofish256-sha2_512-modp4096!
-	esp=twofish256-sha2_512!
-	pfs=no
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-c-p/alg-twofish/hosts/moon/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-c-p/alg-twofish/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/gcrypt-ikev1-c-p/alg-twofish/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home

testing/tests/gcrypt-ikev1-c-p/alg-twofish/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/gcrypt-ikev1-p-c/alg-serpent/description.txt

@@ -1,4 +0,0 @@
-Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the strong cipher suite
-<b>SERPENT_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and 
-<b>SERPENT_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.

testing/tests/gcrypt-ikev1-p-c/alg-serpent/evaltest.dat

@@ -1,13 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*ESTABLISHED.*moon.strongswan.org.*[email protected]::YES
-carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*INSTALLED, TUNNEL::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512_256::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
-moon:: ipsec statusall 2> /dev/null::SERPENT_CBC_256/HMAC_SHA2_512_256,::YES
-carol::ip xfrm state::enc cbc(serpent)::YES
-moon:: ip xfrm state::enc cbc(serpent)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES

testing/tests/gcrypt-ikev1-p-c/alg-serpent/hosts/carol/etc/ipsec.conf

@@ -1,26 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=serpent256-sha2_512-modp4096!
-	esp=serpent256-sha2_512!
-	pfs=no
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-c/alg-serpent/hosts/carol/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-c/alg-serpent/hosts/moon/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-       
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=serpent256-sha512-modp4096!
-	esp=serpent256-sha512!
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-c/alg-serpent/hosts/moon/etc/strongswan.conf

@@ -1,10 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
-  send_vendor_id = yes
-}
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-c/alg-serpent/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/gcrypt-ikev1-p-c/alg-serpent/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home

testing/tests/gcrypt-ikev1-p-c/alg-serpent/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/gcrypt-ikev1-p-c/alg-twofish/description.txt

@@ -1,4 +0,0 @@
-Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the strong cipher suite
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and 
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.

testing/tests/gcrypt-ikev1-p-c/alg-twofish/evaltest.dat

@@ -1,13 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*ESTABLISHED.*moon.strongswan.org.*[email protected]::YES
-carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*INSTALLED, TUNNEL::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512_256::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
-moon:: ipsec statusall 2> /dev/null::TWOFISH_CBC_256/HMAC_SHA2_512_256,::YES
-carol::ip xfrm state::enc cbc(twofish)::YES
-moon:: ip xfrm state::enc cbc(twofish)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES

testing/tests/gcrypt-ikev1-p-c/alg-twofish/hosts/carol/etc/ipsec.conf

@@ -1,26 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=twofish256-sha2_512-modp4096!
-	esp=twofish256-sha2_512!
-	pfs=no
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-c/alg-twofish/hosts/carol/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-c/alg-twofish/hosts/moon/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-       
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=twofish256-sha512-modp4096!
-	esp=twofish256-sha512!
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-c/alg-twofish/hosts/moon/etc/strongswan.conf

@@ -1,10 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
-  send_vendor_id = yes
-}
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-c/alg-twofish/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/gcrypt-ikev1-p-c/alg-twofish/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home

testing/tests/gcrypt-ikev1-p-c/alg-twofish/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/gcrypt-ikev1-p-p/alg-serpent/description.txt

@@ -1,4 +0,0 @@
-Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the strong cipher suite
-<b>SERPENT_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and 
-<b>SERPENT_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.

testing/tests/gcrypt-ikev1-p-p/alg-serpent/evaltest.dat

@@ -1,13 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
-carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
-moon:: ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
-carol::ip xfrm state::enc cbc(serpent)::YES
-moon:: ip xfrm state::enc cbc(serpent)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES

testing/tests/gcrypt-ikev1-p-p/alg-serpent/hosts/carol/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=serpent256-sha2_512-modp4096!
-	esp=serpent256-sha2_512!
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-p/alg-serpent/hosts/carol/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-p/alg-serpent/hosts/moon/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-       
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=serpent256-sha2_512-modp4096!
-	esp=serpent256-sha2_512!
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-p/alg-serpent/hosts/moon/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-p/alg-serpent/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/gcrypt-ikev1-p-p/alg-serpent/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home

testing/tests/gcrypt-ikev1-p-p/alg-serpent/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/gcrypt-ikev1-p-p/alg-twofish/description.txt

@@ -1,4 +0,0 @@
-Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the strong cipher suite
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and 
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.

testing/tests/gcrypt-ikev1-p-p/alg-twofish/evaltest.dat

@@ -1,13 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
-carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
-moon:: ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
-carol::ip xfrm state::enc cbc(twofish)::YES
-moon:: ip xfrm state::enc cbc(twofish)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES

testing/tests/gcrypt-ikev1-p-p/alg-twofish/hosts/carol/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=twofish256-sha2_512-modp4096!
-	esp=twofish256-sha2_512!
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-p/alg-twofish/hosts/carol/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-p/alg-twofish/hosts/moon/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-       
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=twofish256-sha2_512-modp4096!
-	esp=twofish256-sha2_512!
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/gcrypt-ikev1-p-p/alg-twofish/hosts/moon/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/gcrypt-ikev1-p-p/alg-twofish/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/gcrypt-ikev1-p-p/alg-twofish/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home

testing/tests/gcrypt-ikev1-p-p/alg-twofish/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/ikev1-c-p/alg-blowfish/description.txt

@@ -1,6 +0,0 @@
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each 
-to gateway <b>moon</b> using <b>Blowfish</b> for both IKE and ESP
-encryption.  Upon the successful establishment of the IPsec tunnels, <b>leftfirewall=yes</b>
-automatically inserts iptables-based firewall rules that let pass the tunneled traffic.
-In order to test both tunnel and firewall, both <b>carol</b> and <b>dave</b> ping
-the client <b>alice</b> behind the gateway <b>moon</b>.

testing/tests/ikev1-c-p/alg-blowfish/evaltest.dat

@@ -1,15 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-dave:: ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall 2> /dev/null::IKE proposal: BLOWFISH_CBC_256/HMAC_SHA2_512_256::YES
-dave:: ipsec statusall 2> /dev/null::IKE proposal: BLOWFISH_CBC_128/HMAC_SHA2_256_128::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-dave:: ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall 2> /dev/null::BLOWFISH_CBC_192/HMAC_SHA2_384_192,::YES
-dave:: ipsec statusall 2> /dev/null::BLOWFISH_CBC_128/HMAC_SHA2_256_128,::YES
-carol::ip -s xfrm state::enc cbc(blowfish).*(192 bits)::YES
-dave:: ip -s xfrm state::enc cbc(blowfish).*(128 bits)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 192::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 192::YES
-moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP.*length 184::YES
-moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP.*length 184::YES

testing/tests/ikev1-c-p/alg-blowfish/hosts/carol/etc/ipsec.conf

@@ -1,24 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-	charondebug="cfg 2"
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=blowfish256-sha512-modp2048!
-	esp=blowfish192-sha384!
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	auto=add

testing/tests/ikev1-c-p/alg-blowfish/hosts/carol/etc/strongswan.conf

@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  dh_exponent_ansi_x9_42 = no
-  load = aes des blowfish md5 sha1 sha2 pem pkcs1 gmp curl random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
-}

testing/tests/ikev1-c-p/alg-blowfish/hosts/dave/etc/ipsec.conf

@@ -1,23 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=blowfish128-sha256-modp1536!
-	esp=blowfish128-sha256!
-
-conn home
-	left=PH_IP_DAVE
-	leftcert=daveCert.pem
-	[email protected]
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	auto=add

testing/tests/ikev1-c-p/alg-blowfish/hosts/dave/etc/strongswan.conf

@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  dh_exponent_ansi_x9_42 = no
-  load = aes des blowfish md5 sha1 sha2 pem pkcs1 gmp curl random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
-}

testing/tests/ikev1-c-p/alg-blowfish/hosts/moon/etc/ipsec.conf

@@ -1,26 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control crypt"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	ike=blowfish256-sha512-modp2048,blowfish128-sha256-modp1536!
-	esp=blowfish192-sha384,blowfish128-sha256!
-	pfs=no
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	leftfirewall=yes
-	right=%any
-	auto=add

testing/tests/ikev1-c-p/alg-blowfish/hosts/moon/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = sha1 sha2 md5 aes des blowfish hmac pem pkcs1 x509 gmp random nonce curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/ikev1-c-p/alg-blowfish/posttest.dat

@@ -1,6 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop
-dave::ipsec stop
-moon::/etc/init.d/iptables stop 2> /dev/null
-carol::/etc/init.d/iptables stop 2> /dev/null
-dave::/etc/init.d/iptables stop 2> /dev/null

testing/tests/ikev1-c-p/alg-blowfish/pretest.dat

@@ -1,9 +0,0 @@
-moon::/etc/init.d/iptables start 2> /dev/null
-carol::/etc/init.d/iptables start 2> /dev/null
-dave::/etc/init.d/iptables start 2> /dev/null
-moon::ipsec start
-carol::ipsec start
-dave::ipsec start
-carol::sleep 1
-carol::ipsec up home
-dave::ipsec up home

testing/tests/ikev1-c-p/alg-blowfish/test.conf

@@ -1,21 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou dave"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w-d.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol dave"

testing/tests/ikev1-c-p/compress/description.txt

@@ -1,3 +0,0 @@
-This scenario enables IPCOMP compression between roadwarrior <b>carol</b> and
-gateway <b>moon</b>. Two pings from <b>carol</b> to <b>alice</b> checks
-the established tunnel with compression.

testing/tests/ikev1-c-p/compress/evaltest.dat

@@ -1,9 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL.*IPCOMP::YES
-moon:: ipsec statusall 2> /dev/null::policy.*COMPRESS::YES
-moon:: ip xfrm state::proto comp spi::YES
-carol::ip xfrm state::proto comp spi::YES
-carol::ping -n -c 2 -s 8184 -p deadbeef PH_IP_ALICE::8192 bytes from PH_IP_ALICE::YES
-moon::tcpdump::carol.strongswan.org > moon.strongswan.org: ESP::YES
-moon::tcpdump::moon.strongswan.org >  carol.strongswan.org: ESP::YES

testing/tests/ikev1-c-p/compress/hosts/carol/etc/ipsec.conf

@@ -1,21 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	compress=yes
-
-conn home
-	left=PH_IP_CAROL
-	leftcert=carolCert.pem
-	[email protected]
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/ikev1-c-p/compress/hosts/carol/etc/strongswan.conf

@@ -1,5 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default
-}

testing/tests/ikev1-c-p/compress/hosts/moon/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug="control"
-	crlcheckinterval=180
-	strictcrlpolicy=no
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	compress=yes
-	pfs=no
-
-conn rw
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	right=%any
-	[email protected]
-	auto=add

testing/tests/ikev1-c-p/compress/posttest.dat

@@ -1,2 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop

testing/tests/ikev1-c-p/compress/pretest.dat

@@ -1,5 +0,0 @@
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2
-carol::ipsec up home

testing/tests/ikev1-c-p/compress/test.conf

@@ -1,22 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-

testing/tests/ikev1-c-p/config-payload/description.txt

@@ -1,7 +0,0 @@
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>.
-Both <b>carol</b> and <b>dave</b> request a <b>virtual IP</b> via the IKE Mode Config protocol
-by using the <b>leftsourceip=%config</b> parameter. <b>leftfirewall=yes</b> automatically
-inserts iptables-based firewall rules that let pass the tunneled traffic. In order to test the
-tunnels, <b>carol</b> and <b>dave</b> then ping the client <b>alice</b> behind the gateway
-<b>moon</b>. The source IP addresses of the two pings will be the virtual IPs <b>carol1</b>
-and <b>dave1</b>, respectively.

testing/tests/ikev1-c-p/config-payload/evaltest.dat

@@ -1,26 +0,0 @@
-carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
-carol::cat /var/log/daemon.log::installing new virtual IP PH_IP_CAROL1::YES
-carol::ip addr list dev eth0::PH_IP_CAROL1::YES
-carol::ip route list table 220::10.1.0.0/16.*src PH_IP_CAROL1::YES
-carol::cat /etc/resolv.conf::nameserver PH_IP_WINNETOU .*from moon.strongswan.org::YES
-carol::cat /etc/resolv.conf::nameserver PH_IP_VENUS .*from moon.strongswan.org::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-dave:: ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-dave:: ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
-dave:: cat /var/log/daemon.log::installing new virtual IP PH_IP_DAVE1::YES
-dave:: ip addr list dev eth0::PH_IP_DAVE1::YES
-dave:: ip route list table 220::10.1.0.0/16.*src PH_IP_DAVE1::YES
-dave:: ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-moon:: ipsec status 2> /dev/null::rw-carol.*STATE_MODE_CFG_R1.*sent ModeCfg reply, established::YES
-moon:: ipsec status 2> /dev/null::rw-dave.*STATE_MODE_CFG_R1.*sent ModeCfg reply, established::YES
-moon:: ipsec status 2> /dev/null::rw-carol.*STATE_QUICK_R2.*IPsec SA established::YES
-moon:: ipsec status 2> /dev/null::rw-dave.*STATE_QUICK_R2.*IPsec SA established::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
-moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP::YES
-moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP::YES
-alice::tcpdump::IP carol1.strongswan.org > alice.strongswan.org: ICMP echo request::YES
-alice::tcpdump::IP alice.strongswan.org > carol1.strongswan.org: ICMP echo reply::YES
-alice::tcpdump::IP dave1.strongswan.org > alice.strongswan.org: ICMP echo request::YES
-alice::tcpdump::IP alice.strongswan.org > dave1.strongswan.org: ICMP echo reply::YES

testing/tests/ikev1-c-p/config-payload/hosts/carol/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-
-conn home
-	left=PH_IP_CAROL
-	leftsourceip=%config
-	leftcert=carolCert.pem
-	[email protected]
-	leftfirewall=yes
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/ikev1-c-p/config-payload/hosts/carol/etc/strongswan.conf

@@ -1,5 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown resolve
-}

testing/tests/ikev1-c-p/config-payload/hosts/dave/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-
-conn home
-	left=PH_IP_DAVE
-	leftsourceip=%config
-	leftcert=daveCert.pem
-	[email protected]
-	leftfirewall=yes
-	right=PH_IP_MOON
-	rightsubnet=10.1.0.0/16
-	[email protected]
-	auto=add

testing/tests/ikev1-c-p/config-payload/hosts/dave/etc/strongswan.conf

@@ -1,5 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown resolve
-}

testing/tests/ikev1-c-p/config-payload/hosts/moon/etc/ipsec.conf

@@ -1,33 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug=control
-	crlcheckinterval=180
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	pfs=no
-	rekey=no
-	left=PH_IP_MOON
-	leftsubnet=10.1.0.0/16
-	leftsourceip=PH_IP_MOON1
-	leftcert=moonCert.pem
-	[email protected]
-	leftfirewall=yes
-
-conn rw-carol
-	right=%any
-	[email protected]
-	rightsourceip=PH_IP_CAROL1
-	auto=add
-
-conn rw-dave
-	right=%any
-	[email protected]
-	rightsourceip=PH_IP_DAVE1
-	auto=add

testing/tests/ikev1-c-p/config-payload/hosts/moon/etc/strongswan.conf

@@ -1,13 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random nonce curl attr kernel-netlink
-  dns1 = PH_IP_WINNETOU
-  dns2 = PH_IP_VENUS
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/ikev1-c-p/config-payload/posttest.dat

@@ -1,6 +0,0 @@
-moon::ipsec stop
-carol::ipsec stop
-dave::ipsec stop
-moon::/etc/init.d/iptables stop 2> /dev/null
-carol::/etc/init.d/iptables stop 2> /dev/null
-dave::/etc/init.d/iptables stop 2> /dev/null

testing/tests/ikev1-c-p/config-payload/pretest.dat

@@ -1,10 +0,0 @@
-moon::/etc/init.d/iptables start 2> /dev/null
-carol::/etc/init.d/iptables start 2> /dev/null
-dave::/etc/init.d/iptables start 2> /dev/null
-carol::ipsec start
-dave::ipsec start
-moon::ipsec start
-carol::sleep 2 
-carol::ipsec up home
-dave::ipsec up home
-carol::sleep 1

testing/tests/ikev1-c-p/config-payload/test.conf

@@ -1,21 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou dave"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w-d.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon alice"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol dave"

testing/tests/ikev1-c-p/nat-rw/description.txt

@@ -1,5 +0,0 @@
-The roadwarriors <b>alice</b> and <b>venus</b> sitting behind the NAT router <b>moon</b> set up
-tunnels to gateway <b>sun</b>. UDP encapsulation is used to traverse the NAT router.
-<b>leftfirewall=yes</b> automatically inserts iptables-based firewall rules that let pass
-the tunneled traffic. In order to test the tunnel, the NAT-ed hosts <b>alice</b> and <b>venus</b>
-ping the client <b>bob</b> behind the gateway <b>sun</b>.

testing/tests/ikev1-c-p/nat-rw/evaltest.dat

@@ -1,18 +0,0 @@
-alice::ipsec status 2> /dev/null::nat-t.*ESTABLISHED.*[email protected].*sun.strongswan.org::YES
-venus::ipsec status 2> /dev/null::nat-t.*ESTABLISHED.*venus.strongswan.org.*sun.strongswan.org::YES
-sun::  ipsec status 2> /dev/null::nat-t.*STATE_MAIN_R3.*ISAKMP SA established::YES
-sun::  ipsec status 2> /dev/null::nat-t.*sun.strongswan.org.*[email protected]::YES
-sun::  ipsec status 2> /dev/null::nat-t.*sun.strongswan.org.*venus.strongswan.org::YES
-alice::ipsec status 2> /dev/null::nat-t.*INSTALLED, TUNNEL, ESP in UDP::YES
-venus::ipsec status 2> /dev/null::nat-t.*INSTALLED, TUNNEL, ESP in UDP::YES
-sun::  ipsec status 2> /dev/null::nat-t.*STATE_QUICK_R2.*IPsec SA established::YES
-alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
-venus::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
-moon:: sleep 6::no output expected::NO
-bob::  ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-bob::  ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
-moon::tcpdump::IP moon.strongswan.org.* > sun.strongswan.org.ipsec-nat-t: UDP-encap: ESP::YES
-moon::tcpdump::IP sun.strongswan.org.ipsec-nat-t > moon.strongswan.org.*: UDP-encap: ESP::YES
-moon::tcpdump::IP moon.strongswan.org.* > sun.strongswan.org.ipsec-nat-t: isakmp-nat-keep-alive::YES
-alice::cat /var/log/daemon.log::sending keep alive::YES
-venus::cat /var/log/daemon.log::sending keep alive::YES

testing/tests/ikev1-c-p/nat-rw/hosts/alice/etc/ipsec.conf

@@ -1,21 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-		
-conn nat-t
-	left=%any
-	leftcert=aliceCert.pem
-	[email protected]
-	leftfirewall=yes
-	right=PH_IP_SUN
-	[email protected]
-	rightsubnet=10.2.0.0/16
-	auto=add

testing/tests/ikev1-c-p/nat-rw/hosts/alice/etc/strongswan.conf

@@ -1,7 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
-
-  keep_alive = 5
-}

testing/tests/ikev1-c-p/nat-rw/hosts/sun/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutodebug=control
-	crlcheckinterval=180
-	nat_traversal=yes
-	charonstart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-	pfs=no
-
-conn nat-t
-	left=PH_IP_SUN
-	leftcert=sunCert.pem
-	[email protected]
-	leftfirewall=yes
-	leftsubnet=10.2.0.0/16
-	right=%any
-	rightsubnetwithin=10.1.0.0/16
-	auto=add

testing/tests/ikev1-c-p/nat-rw/hosts/sun/etc/strongswan.conf

@@ -1,11 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
-  load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random nonce curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/ikev1-c-p/nat-rw/hosts/venus/etc/ipsec.conf

@@ -1,21 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-
-conn nat-t
-	left=%any
-	leftcert=venusCert.pem
-	[email protected]
-	leftfirewall=yes
-	right=PH_IP_SUN
-	[email protected]
-	rightsubnet=10.2.0.0/16
-	auto=add

testing/tests/ikev1-c-p/nat-rw/hosts/venus/etc/strongswan.conf

@@ -1,7 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
-
-  keep_alive = 5
-}

testing/tests/ikev1-c-p/nat-rw/posttest.dat

@@ -1,8 +0,0 @@
-sun::ipsec stop
-alice::ipsec stop
-venus::ipsec stop
-alice::/etc/init.d/iptables stop 2> /dev/null
-venus::/etc/init.d/iptables stop 2> /dev/null
-sun::/etc/init.d/iptables stop 2> /dev/null
-moon::iptables -t nat -F
-moon::conntrack -F

testing/tests/ikev1-c-p/nat-rw/pretest.dat

@@ -1,14 +0,0 @@
-alice::/etc/init.d/iptables start 2> /dev/null
-venus::/etc/init.d/iptables start 2> /dev/null
-sun::/etc/init.d/iptables start 2> /dev/null
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p udp -j SNAT --to-source PH_IP_MOON:1024-1100
-moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p tcp -j SNAT --to-source PH_IP_MOON:2000-2100
-alice::ipsec start
-venus::ipsec start
-sun::ipsec start
-alice::sleep 2 
-alice::ipsec up nat-t
-venus::sleep 2 
-venus::ipsec up nat-t
-venus::sleep 2

testing/tests/ikev1-c-p/nat-rw/test.conf

@@ -1,21 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice venus moon winnetou sun bob"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-v-m-w-s-b.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="alice venus sun"

testing/tests/ikev1-c-p/net2net-cert/description.txt

@@ -1,6 +0,0 @@
-A connection between the subnets behind the gateways <b>moon</b> and <b>sun</b> is set up.
-The authentication is based on <b>X.509 certificates</b>. Upon the successful
-establishment of the IPsec tunnel, <b>leftfirewall=yes</b> automatically
-inserts iptables-based firewall rules that let pass the tunneled traffic.
-In order to test both tunnel and firewall, client <b>alice</b> behind gateway <b>moon</b>
-pings client <b>bob</b> located behind gateway <b>sun</b>.

testing/tests/ikev1-c-p/net2net-cert/evaltest.dat

@@ -1,7 +0,0 @@
-moon::ipsec status 2> /dev/null::net-net.*ESTABLISHED.*moon.strongswan.org.*sun.strongswan.org::YES
-sun:: ipsec status 2> /dev/null::net-net.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
-moon::ipsec status 2> /dev/null::net-net.*INSTALLED, TUNNEL::YES
-sun:: ipsec status 2> /dev/null::net-net.*STATE_QUICK_R2.*IPsec SA established::YES
-alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
-sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
-sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES

testing/tests/ikev1-c-p/net2net-cert/hosts/moon/etc/ipsec.conf

@@ -1,22 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev1
-
-conn net-net 
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	[email protected]
-	leftsubnet=10.1.0.0/16
-	leftfirewall=yes
-	right=PH_IP_SUN
-	[email protected]
-	rightsubnet=10.2.0.0/16
-	auto=add

testing/tests/ikev1-c-p/net2net-cert/hosts/moon/etc/strongswan.conf

@@ -1,9 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
-}
-
-libstrongswan {
-  dh_exponent_ansi_x9_42 = no
-}

testing/tests/ikev1-c-p/net2net-cert/hosts/sun/etc/ipsec.conf

@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-	charonstart=no
-	plutodebug=control
-	crlcheckinterval=180
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-        keyingtries=1
-	keyexchange=ikev1
-	pfs=no
-
-conn net-net 
-	left=PH_IP_SUN
-	leftcert=sunCert.pem
-	[email protected]
-	leftsubnet=10.2.0.0/16
-	leftfirewall=yes
-	right=PH_IP_MOON
-	[email protected]
-	rightsubnet=10.1.0.0/16
-	auto=add