Fix of the mutual TNC measurement use case

If the IKEv2 initiator acting as a TNC server receives invalid TNC measurements
from the IKEv2 responder acting as a TNC clienti, the exchange of PB-TNC batches
is continued until the IKEv2 responder acting as a TNC server has also finished
its TNC measurements.

In the past if these measurements in the other direction were correct
the IKEv2 responder acting as EAP server declared the IKEv2 EAP authentication
successful and the IPsec connection was established even though the TNC
measurement verification on the EAP peer side failed.

The fix adds an "allow" group membership on each endpoint if the corresponding
TNC measurements of the peer are successful. By requiring a "allow" group
membership in the IKEv2 connection definition the IPsec connection succeeds
only if the TNC measurements on both sides are valid.
This commit is contained in:
Andreas Steffen
2016-02-16 18:00:27 +01:00
parent 70934d9436
commit 4d83c5b4a6
17 changed files with 234 additions and 28 deletions
@@ -0,0 +1,7 @@
moon::cat /var/log/daemon.log::activating mutual PB-TNC half duplex protocol::YES
sun:: cat /var/log/daemon.log::activating mutual PB-TNC half duplex protocol::YES
moon::cat /var/log/daemon.log::final recommendation is.*no access::YES
sun:: cat /var/log/daemon.log::final recommendation is.*allow::YES
moon::swanctl --list-sas --raw 2> /dev/null::mutual.*version=2 state=ESTABLISHED local-host=192.168.0.1 local-id=moon.strongswan.org remote-host=192.168.0.2 remote-id=sun.strongswan.org initiator=yes.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=ECP_256.*child-sas.*mutual.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.1/32] remote-ts=\[192.168.0.2/32]::NO
sun::swanctl --list-sas --raw 2> /dev/null::mutual.*version=2 state=ESTABLISHED local-host=192.168.0.2 local-id=sun.strongswan.org remote-host=192.168.0.1 remote-id=moon.strongswan.org.*encr-alg=AES_CBC encr-keysize=128 integ-alg=HMAC_SHA2_256_128 prf-alg=PRF_HMAC_SHA2_256 dh-group=ECP_256.*child-sas.*mutual.*state=INSTALLED mode=TUNNEL protocol=ESP.*encr-alg=AES_GCM_16 encr-keysize=128.*local-ts=\[192.168.0.2/32] remote-ts=\[192.168.0.1/32]::NO
moon::ping -c 1 -W 1 192.168.0.2::64 bytes from 192.168.0.2: icmp_req=1::NO