Adapt test configurations

Adapt test configurations to the new Debian-based system.

testing/tests/ikev2/rw-eap-sim-only-radius/evaltest.dat

@@ -4,7 +4,7 @@ carol::cat /var/log/daemon.log::authentication of 'moon.strongswan.org' with EAP
 moon:: cat /var/log/daemon.log::authentication of '[email protected]' with EAP successful::YES
 moon:: ipsec status 2> /dev/null::rw-eap.*ESTABLISHED.*moon.strongswan.org.*[email protected]::YES
 carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*[email protected].*moon.strongswan.org::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_req=1::YES
 moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
 moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
 moon:: cat /var/log/daemon.log::RADIUS authentication of '[email protected]' failed::YES
@@ -12,4 +12,4 @@ moon:: cat /var/log/daemon.log::EAP method EAP_SIM failed for peer dave@strongsw
 moon:: ipsec status 2> /dev/null::rw-eap.*ESTABLISHED.*moon.strongswan.org.*[email protected]::NO
 dave:: cat /var/log/daemon.log::received EAP_FAILURE, EAP authentication failed::YES
 dave:: ipsec status 2> /dev/null::home.*ESTABLISHED::NO
-dave:: ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::NO
+dave:: ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_req=1::NO

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/freeradius/eap.conf

@@ -0,0 +1,5 @@
+eap {
+  default_eap_type = sim
+  sim {
+  }
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/freeradius/modules/sim_files

@@ -0,0 +1,3 @@
+sim_files {
+	simtriplets = "/etc/freeradius/triplets.dat"
+}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/freeradius/sites-available/default

@@ -41,4 +41,3 @@ pre-proxy {
 post-proxy {
   eap
 }
-

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/freeradius/triplets.dat

@@ -4,4 +4,3 @@ [email protected],32000000000000000000000000000000,32112233,325566778899AABB
 [email protected],33000000000000000000000000000000,33112233,335566778899AABB
 [email protected],34000000000000000000000000000000,34112233,345566778899AABB
 [email protected],35000000000000000000000000000000,35112233,355566778899AABB
-

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/clients.conf

@@ -1,4 +0,0 @@
-client PH_IP_MOON1 {
-  secret    = gv6URkSs 
-  shortname = moon
-}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/eap.conf

@@ -1,5 +0,0 @@
-eap {
-  default_eap_type = sim 
-  sim {
-  }
-}

testing/tests/ikev2/rw-eap-sim-only-radius/hosts/alice/etc/raddb/radiusd.conf

@@ -1,123 +0,0 @@
-# radiusd.conf	-- FreeRADIUS server configuration file.
-
-prefix = /usr
-exec_prefix = ${prefix}
-sysconfdir = /etc
-localstatedir = /var
-sbindir = ${exec_prefix}/sbin
-logdir = ${localstatedir}/log/radius
-raddbdir = ${sysconfdir}/raddb
-radacctdir = ${logdir}/radacct
-
-#  name of the running server.  See also the "-n" command-line option.
-name = radiusd
-
-#  Location of config and logfiles.
-confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/radiusd
-
-# Should likely be ${localstatedir}/lib/radiusd
-db_dir = ${raddbdir}
-
-# libdir: Where to find the rlm_* modules.
-libdir = ${exec_prefix}/lib
-
-#  pidfile: Where to place the PID of the RADIUS server.
-pidfile = ${run_dir}/${name}.pid
-
-#  max_request_time: The maximum time (in seconds) to handle a request.
-max_request_time = 30
-
-#  cleanup_delay: The time to wait (in seconds) before cleaning up
-cleanup_delay = 5
-
-#  max_requests: The maximum number of requests which the server keeps
-max_requests = 1024
-
-#  listen: Make the server listen on a particular IP address, and send
-listen {
-  type = auth
-  ipaddr = PH_IP_ALICE 
-  port = 0
-}
-
-#  This second "listen" section is for listening on the accounting
-#  port, too.
-#
-listen {
-  type  = acct
-  ipaddr = PH_IP_ALICE 
-  port = 0
-}
-
-#  hostname_lookups: Log the names of clients or just their IP addresses
-hostname_lookups = no
-
-#  Core dumps are a bad thing.  This should only be set to 'yes'
-allow_core_dumps = no
-
-#  Regular expressions
-regular_expressions = yes
-extended_expressions = yes
-
-#  Logging section.  The various "log_*" configuration items
-log {
-  destination = files
-  file = ${logdir}/radius.log
-  syslog_facility = daemon
-  stripped_names = no
-  auth = yes 
-  auth_badpass = yes 
-  auth_goodpass = yes 
-}
-
-#  The program to execute to do concurrency checks.
-checkrad = ${sbindir}/checkrad
-
-#  Security considerations
-security {
-  max_attributes = 200
-  reject_delay = 1
-  status_server = yes
-}
-
-# PROXY CONFIGURATION
-proxy_requests = yes
-$INCLUDE proxy.conf
-
-# CLIENTS CONFIGURATION
-$INCLUDE clients.conf
-
-# THREAD POOL CONFIGURATION
-thread pool {
-  start_servers = 5
-  max_servers = 32
-  min_spare_servers = 3
-  max_spare_servers = 10
-  max_requests_per_server = 0
-}
-
-# MODULE CONFIGURATION
-modules {
-  $INCLUDE ${confdir}/modules/
-  $INCLUDE eap.conf
-  $INCLUDE sql.conf
-  $INCLUDE sql/mysql/counter.conf
-  sim_files {
-    simtriplets = "/etc/raddb/triplets.dat"
-  }
-}
-
-# Instantiation
-instantiate {
-  exec
-  expr
-  expiration
-  logintime
-}
-
-# Policies
-$INCLUDE policy.conf
-
-# Include all enabled virtual hosts
-$INCLUDE sites-enabled/

testing/tests/ikev2/rw-eap-sim-only-radius/posttest.dat

@@ -1,7 +1,7 @@
 moon::ipsec stop
 carol::ipsec stop
 dave::ipsec stop
-alice::/etc/init.d/radiusd stop
+alice::killall radiusd
 moon::/etc/init.d/iptables stop 2> /dev/null
 carol::/etc/init.d/iptables stop 2> /dev/null
 dave::/etc/init.d/iptables stop 2> /dev/null

testing/tests/ikev2/rw-eap-sim-only-radius/pretest.dat

@@ -4,8 +4,8 @@ dave::/etc/init.d/iptables start 2> /dev/null
 moon::rm /etc/ipsec.d/cacerts/*
 carol::rm /etc/ipsec.d/cacerts/*
 dave::rm /etc/ipsec.d/cacerts/*
-alice::cat /etc/raddb/triplets.dat
-alice::/etc/init.d/radiusd start
+alice::cat /etc/freeradius/triplets.dat
+alice::radiusd
 moon::ipsec start
 carol::ipsec start
 dave::ipsec start