added ikev2/nat-virtual-ip scenario
This commit is contained in:
Andreas Steffen
@@ -0,0 +1,6 @@
|
|||||||
|
The router <b>moon</b> sets up a connection to gateway <b>sun</b> in order
|
||||||
|
to reach the subnet hidden behind <b>sun</b>. The gateway <b>sun</b> assigns a
|
||||||
|
virtual IP address to router <b>moon</b>. A special updown script on <b>moon</b>
|
||||||
|
specified by <b>leftupdown=/etc/nat_updown</b> dynamically inserts a source NAT rule
|
||||||
|
which maps the IP address of client <b>alice</b> to the virtual IP of <b>moon</b>.
|
||||||
|
This allows <b>alice</b> to access client <b>bob</b> via the established IPsec tunnel.
|
||||||
@@ -0,0 +1,8 @@
|
|||||||
|
moon::ipsec statusall::net-net.*ESTABLISHED::YES
|
||||||
|
sun::ipsec statusall::net-net.*ESTABLISHED::YES
|
||||||
|
moon::cat /var/log/daemon.log::inserted NAT rule mapping PH_IP_ALICE to virtual IP::YES
|
||||||
|
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
|
||||||
|
sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
|
||||||
|
sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES
|
||||||
|
bob::tcpdump::IP alice2.strongswan.org > bob.strongswan.org: ICMP::YES
|
||||||
|
bob::tcpdump::IP bob.strongswan.org > alice2.strongswan.org: ICMP::YES
|
||||||
@@ -0,0 +1,70 @@
|
|||||||
|
# /etc/hosts: This file describes a number of hostname-to-address
|
||||||
|
# mappings for the TCP/IP subsystem. It is mostly
|
||||||
|
# used at boot time, when no name servers are running.
|
||||||
|
# On small systems, this file can be used instead of a
|
||||||
|
# "named" name server. Just add the names, addresses
|
||||||
|
# and any aliases to this file...
|
||||||
|
#
|
||||||
|
|
||||||
|
127.0.0.1 localhost
|
||||||
|
|
||||||
|
192.168.0.254 uml0.strongswan.org uml0
|
||||||
|
10.1.0.254 uml1.strongswan.org uml1
|
||||||
|
10.2.0.254 uml1.strongswan.org uml2
|
||||||
|
|
||||||
|
10.1.0.10 alice.strongswan.org alice
|
||||||
|
10.1.0.20 venus.strongswan.org venus
|
||||||
|
10.1.0.1 moon1.strongswan.org moon1
|
||||||
|
192.168.0.1 moon.strongswan.org moon
|
||||||
|
192.168.0.50 alice1.strongswan.org alice1
|
||||||
|
192.168.0.100 carol.strongswan.org carol
|
||||||
|
10.3.0.1 carol1.strongswan.org carol1
|
||||||
|
192.168.0.150 winnetou.strongswan.org winnetou crl.strongswan.org ocsp.strongswan.org ldap.strongswan.org
|
||||||
|
192.168.0.200 dave.strongswan.org dave
|
||||||
|
10.3.0.2 dave1.strongswan.org dave1
|
||||||
|
192.168.0.2 sun.strongswan.org sun
|
||||||
|
10.2.0.1 sun1.strongswan.org sun1
|
||||||
|
10.2.0.10 bob.strongswan.org bob
|
||||||
|
10.4.0.1 alice2.strongswan.org alice2
|
||||||
|
|
||||||
|
# IPv6 versions of localhost and co
|
||||||
|
::1 ip6-localhost ip6-loopback
|
||||||
|
fe00::0 ip6-localnet
|
||||||
|
ff00::0 ip6-mcastprefix
|
||||||
|
ff02::1 ip6-allnodes
|
||||||
|
ff02::2 ip6-allrouters
|
||||||
|
ff02::3 ip6-allhosts
|
||||||
|
|
||||||
|
# IPv6 solicited-node multicast addresses
|
||||||
|
ff02::1:ff00:1 ip6-mcast-1
|
||||||
|
ff02::1:ff00:2 ip6-mcast-2
|
||||||
|
ff02::1:ff00:10 ip6-mcast-10
|
||||||
|
ff02::1:ff00:15 ip6-mcast-15
|
||||||
|
ff02::1:ff00:20 ip6-mcast-20
|
||||||
|
|
||||||
|
# IPv6 site-local addresses
|
||||||
|
fec0::5 ip6-alice1.strongswan.org ip6-alice1
|
||||||
|
fec1::10 ip6-alice.strongswan.org ip6-alice
|
||||||
|
fec1::20 ip6-venus.strongswan.org ip6-venus
|
||||||
|
fec1::1 ip6-moon1.strongswan.org ip6-moon1
|
||||||
|
fec0::1 ip6-moon.strongswan.org ip6-moon
|
||||||
|
fec0::10 ip6-carol.strongswan.org ip6-carol
|
||||||
|
fec3::1 ip6-carol1.strongswan.org ip6-carol1
|
||||||
|
fec0::15 ip6-winnetou.strongswan.org ip6-winnetou
|
||||||
|
fec0::20 ip6-dave.strongswan.org ip6-dave
|
||||||
|
fec3::2 ip6-dave1.strongswan.org ip6-dave1
|
||||||
|
fec0::2 ip6-sun.strongswan.org ip6-sun
|
||||||
|
fec2::1 ip6-sun1.strongswan.org ip6-sun1
|
||||||
|
fec2::10 ip6-bob.strongswan.org ip6-bob
|
||||||
|
|
||||||
|
# IPv6 link-local HW derived addresses
|
||||||
|
fe80::fcfd:0aff:fe01:14 ip6-hw-venus.strongswan.org ip6-hw-venus
|
||||||
|
fe80::fcfd:0aff:fe01:0a ip6-hw-alice.strongswan.org ip6-hw-alice
|
||||||
|
fe80::fcfd:0aff:fe01:01 ip6-hw-moon1.strongswan.org ip6-hw-moon1
|
||||||
|
fe80::fcfd:c0ff:fea8:01 ip6-hw-moon.strongswan.org ip6-hw-moon
|
||||||
|
fe80::fcfd:c0ff:fea8:64 ip6-hw-carol.strongswan.org ip6-hw-carol
|
||||||
|
fe80::fcfd:c0ff:fea8:96 ip6-hw-winnetou.strongswan.org ip6-hw-winnetou
|
||||||
|
fe80::fcfd:c0ff:fea8:c8 ip6-hw-dave.strongswan.org ip6-hw-dave
|
||||||
|
fe80::fcfd:c0ff:fea8:02 ip6-hw-sun.strongswan.org ip6-hw-sun
|
||||||
|
fe80::fcfd:0aff:fe02:01 ip6-hw-sun1.strongswan.org ip6-hw-sun1
|
||||||
|
fe80::fcfd:0aff:fe02:0a ip6-hw-bob.strongswan.org ip6-hw-bob
|
||||||
Executable
+25
@@ -0,0 +1,25 @@
|
|||||||
|
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||||
|
|
||||||
|
config setup
|
||||||
|
crlcheckinterval=180
|
||||||
|
strictcrlpolicy=no
|
||||||
|
plutostart=no
|
||||||
|
|
||||||
|
conn %default
|
||||||
|
ikelifetime=60m
|
||||||
|
keylife=20m
|
||||||
|
rekeymargin=3m
|
||||||
|
keyingtries=1
|
||||||
|
keyexchange=ikev2
|
||||||
|
mobike=no
|
||||||
|
|
||||||
|
conn net-net
|
||||||
|
left=PH_IP_MOON
|
||||||
|
leftcert=moonCert.pem
|
||||||
|
[email protected]
|
||||||
|
leftsourceip=%config
|
||||||
|
leftupdown=/etc/nat_updown
|
||||||
|
right=PH_IP_SUN
|
||||||
|
[email protected]
|
||||||
|
rightsubnet=10.2.0.0/16
|
||||||
|
auto=add
|
||||||
Executable
+152
@@ -0,0 +1,152 @@
|
|||||||
|
#! /bin/sh
|
||||||
|
# NAT updown script
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Andreas Steffen <[email protected]>
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or modify it
|
||||||
|
# under the terms of the GNU General Public License as published by the
|
||||||
|
# Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful, but
|
||||||
|
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||||
|
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||||
|
# for more details.
|
||||||
|
|
||||||
|
# things that this script gets (from ipsec_pluto(8) man page)
|
||||||
|
#
|
||||||
|
# PLUTO_VERSION
|
||||||
|
# indicates what version of this interface is being
|
||||||
|
# used. This document describes version 1.1. This
|
||||||
|
# is upwardly compatible with version 1.0.
|
||||||
|
#
|
||||||
|
# PLUTO_VERB
|
||||||
|
# specifies the name of the operation to be performed
|
||||||
|
# (prepare-host, prepare-client, up-host, up-client,
|
||||||
|
# down-host, or down-client). If the address family
|
||||||
|
# for security gateway to security gateway communica-
|
||||||
|
# tions is IPv6, then a suffix of -v6 is added to the
|
||||||
|
# verb.
|
||||||
|
#
|
||||||
|
# PLUTO_CONNECTION
|
||||||
|
# is the name of the connection for which we are
|
||||||
|
# routing.
|
||||||
|
#
|
||||||
|
# PLUTO_NEXT_HOP
|
||||||
|
# is the next hop to which packets bound for the peer
|
||||||
|
# must be sent.
|
||||||
|
#
|
||||||
|
# PLUTO_INTERFACE
|
||||||
|
# is the name of the ipsec interface to be used.
|
||||||
|
#
|
||||||
|
# PLUTO_REQID
|
||||||
|
# is the requid of the ESP policy
|
||||||
|
#
|
||||||
|
# PLUTO_ME
|
||||||
|
# is the IP address of our host.
|
||||||
|
#
|
||||||
|
# PLUTO_MY_ID
|
||||||
|
# is the ID of our host.
|
||||||
|
#
|
||||||
|
# PLUTO_MY_CLIENT
|
||||||
|
# is the IP address / count of our client subnet. If
|
||||||
|
# the client is just the host, this will be the
|
||||||
|
# host's own IP address / max (where max is 32 for
|
||||||
|
# IPv4 and 128 for IPv6).
|
||||||
|
#
|
||||||
|
# PLUTO_MY_CLIENT_NET
|
||||||
|
# is the IP address of our client net. If the client
|
||||||
|
# is just the host, this will be the host's own IP
|
||||||
|
# address.
|
||||||
|
#
|
||||||
|
# PLUTO_MY_CLIENT_MASK
|
||||||
|
# is the mask for our client net. If the client is
|
||||||
|
# just the host, this will be 255.255.255.255.
|
||||||
|
#
|
||||||
|
# PLUTO_MY_SOURCEIP
|
||||||
|
# if non-empty, then the source address for the route will be
|
||||||
|
# set to this IP address.
|
||||||
|
#
|
||||||
|
# PLUTO_MY_PROTOCOL
|
||||||
|
# is the IP protocol that will be transported.
|
||||||
|
#
|
||||||
|
# PLUTO_MY_PORT
|
||||||
|
# is the UDP/TCP port to which the IPsec SA is
|
||||||
|
# restricted on our side.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER
|
||||||
|
# is the IP address of our peer.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_ID
|
||||||
|
# is the ID of our peer.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_CA
|
||||||
|
# is the CA which issued the cert of our peer.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_CLIENT
|
||||||
|
# is the IP address / count of the peer's client sub-
|
||||||
|
# net. If the client is just the peer, this will be
|
||||||
|
# the peer's own IP address / max (where max is 32
|
||||||
|
# for IPv4 and 128 for IPv6).
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_CLIENT_NET
|
||||||
|
# is the IP address of the peer's client net. If the
|
||||||
|
# client is just the peer, this will be the peer's
|
||||||
|
# own IP address.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_CLIENT_MASK
|
||||||
|
# is the mask for the peer's client net. If the
|
||||||
|
# client is just the peer, this will be
|
||||||
|
# 255.255.255.255.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_PROTOCOL
|
||||||
|
# is the IP protocol that will be transported.
|
||||||
|
#
|
||||||
|
# PLUTO_PEER_PORT
|
||||||
|
# is the UDP/TCP port to which the IPsec SA is
|
||||||
|
# restricted on the peer side.
|
||||||
|
#
|
||||||
|
|
||||||
|
# define a minimum PATH environment in case it is not set
|
||||||
|
PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin"
|
||||||
|
export PATH
|
||||||
|
|
||||||
|
# resolve octal escape sequences
|
||||||
|
PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
|
||||||
|
PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
|
||||||
|
|
||||||
|
case "$PLUTO_VERB:$1" in
|
||||||
|
up-host:)
|
||||||
|
# connection to me coming up
|
||||||
|
# If you are doing a custom version, firewall commands go here.
|
||||||
|
;;
|
||||||
|
down-host:)
|
||||||
|
# connection to me going down
|
||||||
|
# If you are doing a custom version, firewall commands go here.
|
||||||
|
;;
|
||||||
|
up-client:)
|
||||||
|
# connection to my client subnet coming up
|
||||||
|
# If you are doing a custom version, firewall commands go here.
|
||||||
|
iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
|
||||||
|
-d $PLUTO_PEER_CLIENT -j ACCEPT
|
||||||
|
iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
|
||||||
|
-s $PLUTO_PEER_CLIENT -j ACCEPT
|
||||||
|
iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
|
||||||
|
-d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
|
||||||
|
echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2
|
||||||
|
;;
|
||||||
|
down-client:)
|
||||||
|
# connection to my client subnet going down
|
||||||
|
# If you are doing a custom version, firewall commands go here.
|
||||||
|
iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
|
||||||
|
-d $PLUTO_PEER_CLIENT -j ACCEPT
|
||||||
|
iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
|
||||||
|
-s $PLUTO_PEER_CLIENT -j ACCEPT
|
||||||
|
iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
|
||||||
|
-d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
|
||||||
|
echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2
|
||||||
|
;;
|
||||||
|
*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
|
||||||
|
exit 1
|
||||||
|
;;
|
||||||
|
esac
|
||||||
@@ -0,0 +1,6 @@
|
|||||||
|
# /etc/strongswan.conf - strongSwan configuration file
|
||||||
|
|
||||||
|
charon {
|
||||||
|
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
|
||||||
|
multiple_authentication = no
|
||||||
|
}
|
||||||
Executable
+25
@@ -0,0 +1,25 @@
|
|||||||
|
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||||
|
|
||||||
|
config setup
|
||||||
|
crlcheckinterval=180
|
||||||
|
strictcrlpolicy=no
|
||||||
|
plutostart=no
|
||||||
|
|
||||||
|
conn %default
|
||||||
|
ikelifetime=60m
|
||||||
|
keylife=20m
|
||||||
|
rekeymargin=3m
|
||||||
|
keyingtries=1
|
||||||
|
keyexchange=ikev2
|
||||||
|
mobike=no
|
||||||
|
|
||||||
|
conn net-net
|
||||||
|
left=PH_IP_SUN
|
||||||
|
leftcert=sunCert.pem
|
||||||
|
[email protected]
|
||||||
|
leftsubnet=10.2.0.0/16
|
||||||
|
leftfirewall=yes
|
||||||
|
right=PH_IP_MOON
|
||||||
|
[email protected]
|
||||||
|
rightsourceip=10.4.0.0/24
|
||||||
|
auto=add
|
||||||
@@ -0,0 +1,6 @@
|
|||||||
|
# /etc/strongswan.conf - strongSwan configuration file
|
||||||
|
|
||||||
|
charon {
|
||||||
|
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
|
||||||
|
multiple_authentication = no
|
||||||
|
}
|
||||||
@@ -0,0 +1,5 @@
|
|||||||
|
moon::ipsec stop
|
||||||
|
sun::ipsec stop
|
||||||
|
moon::/etc/init.d/iptables stop 2> /dev/null
|
||||||
|
sun::/etc/init.d/iptables stop 2> /dev/null
|
||||||
|
moon::conntrack -F
|
||||||
@@ -0,0 +1,9 @@
|
|||||||
|
moon::/etc/init.d/iptables start 2> /dev/null
|
||||||
|
sun::/etc/init.d/iptables start 2> /dev/null
|
||||||
|
moon::conntrack -F
|
||||||
|
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||||
|
moon::ipsec start
|
||||||
|
sun::ipsec start
|
||||||
|
moon::sleep 1
|
||||||
|
moon::ipsec up net-net
|
||||||
|
moon::sleep 1
|
||||||
@@ -0,0 +1,21 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
#
|
||||||
|
# This configuration file provides information on the
|
||||||
|
# UML instances used for this test
|
||||||
|
|
||||||
|
# All UML instances that are required for this test
|
||||||
|
#
|
||||||
|
UMLHOSTS="alice moon winnetou sun bob"
|
||||||
|
|
||||||
|
# Corresponding block diagram
|
||||||
|
#
|
||||||
|
DIAGRAM="a-m-w-s-b.png"
|
||||||
|
|
||||||
|
# UML instances on which tcpdump is to be started
|
||||||
|
#
|
||||||
|
TCPDUMPHOSTS="sun bob"
|
||||||
|
|
||||||
|
# UML instances on which IPsec is started
|
||||||
|
# Used for IPsec logging purposes
|
||||||
|
#
|
||||||
|
IPSECHOSTS="moon sun"
|
||||||
Reference in New Issue
Block a user