added

testing/tests/ike/rw-cert/description.txt

@@ -0,0 +1,5 @@
+Roadwarrior <b>carol</b> sets up an IKEv1 connection and roadwarrior <b>dave</b>
+an IKEv2 tunnel, respectively, to the gateway <b>moon</b>.
+In order to test the established tunnels, both roadwarriors ping the client <b>alice</b>
+in the subnet behind gateway <b>moon</b>.
+.

testing/tests/ike/rw-cert/evaltest.dat

@@ -0,0 +1,11 @@
+moon::ipsec statusall::rw.*STATE_QUICK_R2.*IPsec SA established::YES
+moon::ipsec statusall::rw.*IKE_SA_ESTABLISHED::YES
+carol::ipsec statusall::home.*STATE_QUICK_I2.*IPsec SA established::YES
+dave::ipsec statusall::home.*IKE_SA_ESTABLISHED::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
+moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP::YES
+

testing/tests/ike/rw-cert/hosts/dave/etc/ipsec.conf

@@ -0,0 +1,22 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	strictcrlpolicy=no
+	plutostart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+
+conn home
+	left=PH_IP_DAVE
+	leftnexthop=%direct
+	leftcert=daveCert.pem
+	[email protected]
+	right=PH_IP_MOON
+	[email protected]
+	rightsubnet=10.1.0.0/16
+	keyexchange=ikev2
+	auto=add

testing/tests/ike/rw-cert/hosts/moon/etc/ipsec.conf

@@ -0,0 +1,20 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutodebug=control
+	crlcheckinterval=180
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+
+conn rw
+	left=PH_IP_MOON
+	leftnexthop=%direct
+	leftcert=moonCert.pem
+	[email protected]
+	leftsubnet=10.1.0.0/16
+	right=%any
+	auto=add

testing/tests/ike/rw-cert/posttest.dat

@@ -0,0 +1,3 @@
+moon::ipsec stop
+carol::ipsec stop
+dave::ipsec stop

testing/tests/ike/rw-cert/pretest.dat

@@ -0,0 +1,8 @@
+moon::echo 1 > /proc/sys/net/ipv4/ip_forward
+moon::ipsec start
+carol::ipsec start
+dave::ipsec start
+carol::sleep 1 
+carol::ipsec up home
+dave::ipsec up home
+dave::sleep 1

testing/tests/ike/rw-cert/test.conf

@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon carol winnetou dave"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-c-w-d.png"
+ 
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol dave"

testing/tests/ike/rw_v1-net_v2/description.txt

@@ -0,0 +1,7 @@
+A connection between the subnets behind the gateways <b>moon</b> and <b>sun</b>
+is set up using the IKEv2 key exchange protocol whereas the roadwarrior <b>carol</b>
+negotiates the connection via the IKEv1 protocol.
+In order to test the established tunnels, client <b>alice</b> behind gateway <b>moon</b>
+pings client <b>bob</b> located behind gateway <b>sun</b> and roadwarrior <b>carol</b>
+pings the client <b>alice</b> behind <b>moon</b>.
+.

testing/tests/ike/rw_v1-net_v2/evaltest.dat

@@ -0,0 +1,10 @@
+moon::ipsec statusall::net-net.*IKE_SA_ESTABLISHED::YES
+sun::ipsec statusall::net-net.*IKE_SA_ESTABLISHED::YES
+alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
+sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
+sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES
+carol::ipsec status::home.*STATE_QUICK_I2.*IPsec SA established::YES
+moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
+carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
+moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
+moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES

testing/tests/ike/rw_v1-net_v2/hosts/moon/etc/ipsec.conf

@@ -0,0 +1,28 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutodebug=control
+	crlcheckinterval=180
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	left=PH_IP_MOON
+	leftnexthop=%direct
+	leftcert=moonCert.pem
+	[email protected]
+	leftsubnet=10.1.0.0/16
+
+conn net-net
+	right=PH_IP_SUN
+	[email protected]
+	rightsubnet=10.2.0.0/16
+	keyexchange=ikev2
+	auto=add
+
+conn rw
+	right=%any
+	[email protected]
+	keyexchange=ikev1
+	auto=add
+

testing/tests/ike/rw_v1-net_v2/hosts/sun/etc/ipsec.conf

@@ -0,0 +1,15 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutostart=no
+
+conn net-net 
+	left=PH_IP_SUN
+	leftcert=sunCert.pem
+	[email protected]
+	leftsubnet=10.2.0.0/16
+	right=PH_IP_MOON
+	[email protected]
+	rightsubnet=10.1.0.0/16
+	keyexchange=ikev2
+	auto=add

testing/tests/ike/rw_v1-net_v2/posttest.dat

@@ -0,0 +1,3 @@
+carol::ipsec stop
+moon::ipsec stop
+sun::ipsec stop

testing/tests/ike/rw_v1-net_v2/pretest.dat

@@ -0,0 +1,9 @@
+moon::echo 1 > /proc/sys/net/ipv4/ip_forward
+sun::echo 1 > /proc/sys/net/ipv4/ip_forward
+moon::ipsec start
+sun::ipsec start
+carol::ipsec start
+moon::sleep 1 
+moon::ipsec up net-net
+carol::ipsec up home
+moon::sleep 1

testing/tests/ike/rw_v1-net_v2/test.conf

@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon winnetou sun bob"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-w-s-b.png"
+ 
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon sun"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="carol moon sun"