testing: Reorganizing IKEv1 and IKEv2 examples

For documentation purposes the new folders ikev1-algs, ikev2-algs,
ikev1-multi-ca and ikev2-multi-ca have been created. Most of the
test cases have now been converted to the vici interface. The
remaining legacy stroke scenarios yet to be converted have been put
into the ikev2-stroke-bye folder.

For documentation purposes some legacy stroke scenarios will be kept
in the ikev1-stroke, ikev2-stroke and ipv6-stroke folders.
This commit is contained in:
Andreas Steffen
2021-05-21 09:42:50 +02:00
parent db93938297
commit 7c5a2974b9
4054 changed files with 16375 additions and 15209 deletions
@@ -0,0 +1,7 @@
The roadwarrior <b>alice</b> is sitting behind the NAT router <b>moon</b> but
at the outset of the scenario is also directly connected to the 192.168.0.0/24 network
via an additional <b>eth1</b> interface. <b>alice</b> builds up a tunnel to gateway <b>sun</b>
in order to reach <b>bob</b> in the subnet behind. When the <b>eth1</b> interface
goes away, <b>alice</b> switches to <b>eth0</b> and signals the IP address change
via a MOBIKE ADDRESS_UPDATE notification to peer <b>sun</b>. <b>alice</b> sets
a virtual IP of 10.3.0.3, so that the IPsec policies don't have to be changed.
@@ -0,0 +1,18 @@
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE1.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_ALICE1::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
alice::ifdown eth1::No output expected::NO
alice::sleep 1::No output expected::NO
alice::ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_ALICE.*PH_IP_SUN::YES
sun:: ipsec status 2> /dev/null::mobike.*ESTABLISHED.*PH_IP_SUN.*PH_IP_MOON::YES
alice::ipsec statusall 2> /dev/null::10.3.0.3/32 === 10.2.0.0/16::YES
sun:: ipsec statusall 2> /dev/null::10.2.0.0/16 === 10.3.0.3/32::YES
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_.eq=1::YES
sun::tcpdump::alice1.strongswan.org.*sun.strongswan.org: ESP.*seq=0x1::YES
sun::tcpdump::sun.strongswan.org.*alice1.strongswan.org: ESP.*seq=0x1::YES
moon::tcpdump::moon.strongswan.org.*sun.strongswan.org.*: UDP-encap: ESP.*seq=0x2::YES
moon::tcpdump::sun.strongswan.org.*moon.strongswan.org.*: UDP-encap: ESP.*seq=0x2::YES
bob::tcpdump::10.3.0.3.*bob.strongswan.org.*ICMP echo request::YES
bob::tcpdump::bob.strongswan.org.*10.3.0.3.*ICMP echo reply::YES
@@ -0,0 +1,20 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=192.168.0.50
leftsourceip=%config
leftcert=aliceCert.pem
[email protected]
right=PH_IP_SUN
[email protected]
rightsubnet=10.2.0.0/16
auto=add
@@ -0,0 +1,42 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow traffic on lo as ifup/ifdown call bind's rndc which accesses TCP 953
-A OUTPUT -o lo -j ACCEPT
-A INPUT -i lo -j ACCEPT
# allow IPsec tunnel traffic
-A INPUT -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A OUTPUT -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A INPUT -i eth1 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
-A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -0,0 +1,5 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -0,0 +1,20 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn mobike
left=PH_IP_SUN
leftcert=sunCert.pem
[email protected]
leftsubnet=10.2.0.0/16
right=%any
rightsourceip=10.3.0.3
[email protected]
auto=add
@@ -0,0 +1,32 @@
*filter
# default policy is DROP
-P INPUT DROP
-P OUTPUT DROP
-P FORWARD DROP
# allow IPsec tunnel traffic
-A FORWARD -m policy --dir in --pol ipsec --proto esp -j ACCEPT
-A FORWARD -m policy --dir out --pol ipsec --proto esp -j ACCEPT
# allow ESP
-A INPUT -i eth0 -p 50 -j ACCEPT
-A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
-A INPUT -i eth0 -p udp --dport 500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 500 -j ACCEPT
# allow MobIKE
-A INPUT -i eth0 -p udp --dport 4500 -j ACCEPT
-A OUTPUT -o eth0 -p udp --sport 4500 -j ACCEPT
# allow ssh
-A INPUT -p tcp --dport 22 -j ACCEPT
-A OUTPUT -p tcp --sport 22 -j ACCEPT
# allow crl fetch from winnetou
-A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
-A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
COMMIT
@@ -0,0 +1,5 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = random nonce aes sha1 sha2 pem pkcs1 curve25519 gmp x509 curl revocation hmac stroke kernel-netlink socket-default
}
@@ -0,0 +1,5 @@
alice::ipsec stop
sun::ipsec stop
alice::iptables-restore < /etc/iptables.flush
sun::iptables-restore < /etc/iptables.flush
moon::iptables -t nat -F
@@ -0,0 +1,10 @@
alice::ifup eth1
alice::iptables-restore < /etc/iptables.rules
sun::iptables-restore < /etc/iptables.rules
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p udp -j SNAT --to-source PH_IP_MOON:1024-1100
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p tcp -j SNAT --to-source PH_IP_MOON:2000-2100
alice::ipsec start
sun::ipsec start
alice::expect-connection mobike
sun::expect-connection mobike
alice::ipsec up mobike
@@ -0,0 +1,21 @@
#!/bin/bash
#
# This configuration file provides information on the
# guest instances used for this test
# All guest instances that are required for this test
#
VIRTHOSTS="alice moon winnetou sun bob"
# Corresponding block diagram
#
DIAGRAM="a-m-w-s-b.png"
# Guest instances on which tcpdump is to be started
#
TCPDUMPHOSTS="bob moon sun"
# Guest instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice sun"