This was quite confusing previously: While calling insert_before()
and then remove_at() properly replaced the current item, calling them the
other way around inserted the new item before the previous item because
remove_at() changed the enumerator's position to the previous item.
The behavior in corner cases (calling the methods before or after
enumeration) is also changed slightly.
This allows switching to probing mode if the client is on a public IP
and this is the active task and connectivity gets restored. We only add
NAT-D payloads if we are currently behind a NAT (to detect changed NAT
mappings), a MOBIKE update that might follow will add them in case we
move behind a NAT.
Allow charon to start as a non-root user without CAP_CHOWN and still be
able to change the group on files that need to be accessed by charon
after capabilities have been dropped. This requires the user charon starts
as to have access to socket/pidfile directory as well as belong to the
group that charon will run as after dropping capabilities.
Closesstrongswan/strongswan#105.
Stater will lose update/reload commands when there is a second signal
coming in when the previous is still processed. This can happen more
easily with big configurations.
Closesstrongswan/strongswan#101.
In case the PRF's set_key() or allocate_bytes() method failed, skeyseed
was not initialized and the chunk_clear() call later caused a crash.
This could have happened with OpenSSL in FIPS mode when MD5 was
negotiated (and test vectors were not checked, in which case the PRF
couldn't be instantiated as the test vectors would have failed).
MD5 is not included in the default proposal anymore since 5.6.1, so
with recent versions this could only happen with configs that are not
valid in FIPS mode anyway.
Fixes: CVE-2018-10811
The keylength fix for ChaCha20Poly1305 (5a7b0be2) removes the keylength
attribute from the AEAD transform. This breaks compatibility between
versions with the patch and those without. The ChaCha20Poly1305 AEAD
won't match in proposals between such versions, and if no other algorithm
is available, negotiating SAs fails.
As a migration strategy, this patch introduces a new string identifier for a
ChaCha20Poly1305 proposal keyword which uses the explicit keylength, exactly
as it was used before the mentioned patch. Administrators that care about
the use of that AEAD with old clients can temporarily add this keyword to
the list of proposals, until all clients have been upgraded.
The used approach is the least invasive, as it just adds an additional
keyword that can't do any harm if not explicitly configured. Nontheless
allows it the administrator to smoothly keep ChaCha20Poly1305 working,
even if upgrading all peers simultaneously is not an option. It requires
manual configuration edits, though, but we assume that ChaCha20Poly1305
is not that widely used, and not as the only transform in proposals.
Removing the compat keyword in a future version is an option; it might
be helpful for other implementations, though, that falsely use an
explicit key length in ChaCha20Poly1305 AEAD transforms.
We now check if there are other routes tracked for the same destination
and replace the installed route instead of just removing it. Same during
installation, where we previously didn't replace existing routes due to
NLM_F_EXCL. Routes with virtual IPs as source address are preferred over
routes without.
This should allow using trap policies with virtual IPs on Linux.
Fixes#85, #2162.
If the certificate is revoked, we immediately returned and the chain was
invalid, however, if we couldn't fetch the CRL that result was not stored
for intermediate CAs and we weren't able to enforce a strict CRL policy
later.
Using such CRLs can be a problem if the clock on the host doing the
revocation check is trailing behind that of the host issuing CRLs in
scenarios where expired certificates are removed from CRLs. As revoked
certificates that expired will then not be part of new CRLs a host with
trailing clock might still accept such a certificate if it is still
valid according to its system clock but is not contained anymore in the
not yet valid CRL.
According to RFC 4945, section 5.1.3.2, a certificate for IKE must
either not contain the keyUsage extension, or, if it does, have at least
one of the digitalSignature or nonReputiation bits set.
The client identifier serves as unique identifier just like a unique MAC
address would, so even with identity_leases disabled some DHCP servers
might assign unique leases per identity.
This increases the chances that subject DNs that might have been cut
off with the arbitrary previous limit of 64 bytes might now be sent
successfully.
The REQUEST message has the most static overhead in terms of other
options (17 bytes) as compared to DISCOVER (5) and RELEASE (7).
Added to that are 3 bytes for the DHCP message type, which means we have
288 bytes left for the two options based on the client identity (host
name and client identification). Since both contain the same value, a
FQDN identity, which causes a host name option to get added, may be
142 bytes long, other identities like subject DNs may be 255 bytes
long (the maximum for a DHCP option).
According to RFC 2131, the minimum size of the 'options' field is 312
bytes, including the 4 byte magic cookie. There also does not seem to
be any restriction regarding the message length, previously the length
was rounded to a multiple of 64 bytes. The latter might have been
because in BOOTP the options field (or rather vendor-specific area as it
was called back then) had a fixed length of 64 bytes (so max(optlen+4, 64)
might actually have been what was intended), but for DHCP the field is
explicitly variable length, so I don't think it's necessary to pad it.
Since we won't read from the socket reducing the receive buffer saves
some memory and it should also minimize the impact on other processes that
bind the same port (Linux distributes packets to the sockets round-robin).
DHCP servers will respond to port 67 if giaddr is non-zero, which we set
if we are not broadcasting. While such messages are received fine via
RAW socket the kernel will respond with an ICMP port unreachable if no
socket is bound to that port. Instead of opening a dummy socket on port
67 just to avoid the ICMPs we can also just operate with a single
socket, bind it to port 67 and send our requests from that port.
Since SO_REUSEADDR behaves on Linux like SO_REUSEPORT does on other
systems we can bind that port even if a DHCP server is running on the
same host as the daemon (this might have to be adapted to make this work
on other systems, but due to the raw socket the plugin is not that portable
anyway).
The previous code compared the port in the packet to the client port and, if
successful, checked it also against the server port, which, therefore, never
matched, but due to incorrect offsets did skip the BPF_JA. If the client port
didn't match the code also skipped to the instruction after the BPF_JA.
However, the latter was incorrect also and processing would have continued at
the next instruction anyway. Basically, DHCP packets to any port were accepted.
What's not fixed with this is that the kernel returns an ICMP Port
unreachable for packets sent to the server port (67) because we don't
have a socket bound to it.
Fixes: f0212e8837 ("Accept DHCP replies on bootps port, as we act as a relay agent if server address configured")
Tobias Brunner