While this does require quite a bit of memory, on initiators there are
usually fewer concurrent SAs getting created so this should be less of
an issue than on a gateway that handles lots of SAs as responder.
The speed up is about 30% on the initiator during the decapsulation,
while the key generation does take a bit more time (about 3%).
This follows FIPS 203 relatively closely but takes some ideas from the
reference implementation. In particular, how to avoid potential
side-channels via direct C division/modulo operations. However, it just
uses Barrett reduction (no Montgomery reduction) and no negative
coefficients to avoid number format conversions and keep the
implementation clearer.
This registers support for the ML_KEM_{512,768,1024} key exchange
algorithms in the `openssl` plugin when built using AWS-LC as the
libcrypto. To do this, we introduce the `openssl_kem` source files
which implement the key exchange algorithm using the Key Encapsulation
Mechanism (KEM) API. Future KEM algorithms can be implemented
generically using this interface by substituting the appropriate NIDs.
It also supports both seeded (via DRBG) and unseeded modes depending
on the user's requirements for KATs or entropy sources.
It should be noted that this does not add support for KEM algorithms
within upstream OpenSSL and is API incompatible. Future work will need
to condition out the incompatibilities as-appropriate. However, the
high-level logic should be the same for all KEMs and KEM APIs.
References strongswan/strongswan#2228Closesstrongswan/strongswan#2490
Both Diffie-Hellman (DH) and Key Encapsulation Mechanism (KEM) based
key exchange methods use a common ke_test_vector format. The
set_seed() function is used to provide deterministic private key
material for the crypto tests.
As recommended by RFC 2985, section 5.4.1:
ChallengePassword attribute values generated in accordance with this
version of this document SHOULD use the PrintableString encoding
whenever possible. If internationalization issues make this
impossible, the UTF8String alternative SHOULD be used.
Even though the RFC continues with
PKCS #9-attribute processing systems MUST be able to recognize and
process all string types in DirectoryString values.
there might be older SCEP server implementations that don't accept
UTF8String-encoded passwords. In particular because previous versions of
PKCS#9 defined this attribute's type as a CHOICE between PrintableString
and T61String.
References strongswan/strongswan#1831
There are definitions of RNG in <wolfssl/wolfcrypt/settings.h> and
<wolfssl/wolfcrypt/random.h> that play havoc with the literal RNG being
used in the expansions of PLUGIN_*(RNG, ...) when ##-concatenated to
build the enum value FEATURE_RNG.
The #undef in wolfssl_cmmon.h only had an effect if wolfSSL was built
with EdDSA or FIPS enabled, otherwise, the headers that define RNG were
not pulled in before it.
Signed-off-by: Philip Prindeville <[email protected]>
With GCC 13, the compiler apparently applies new aliasing optimizations
when compiled with -O2 and without -fno-strict-aliasing. This caused
the application of the second padding bit, where the state was accessed
via uint8_t[], to be moved before the loop that absorbs the buffer into
the state, where the state is accessed via uint64_t[], resulting in
incorrect output. By only accessing the state via uint64_t[] here the
compiler won't reorder the instructions.
The previous code was in a way too simple which resulted in it being too
strict. For instance, it enforced that intermediate CA certificates
inherited the name constraints of their parents. That's not required by
RFC 5280 and prevented e.g. adding constraints in an intermediate CA
certificate that's followed by another that doesn't contain any
name constraints. That's perfectly fine as the set of constraints
specified by the parent continue to apply to that CA certificate and
the children it issues.
Name constraints were previously also applied to all identities of a
matching type, which is way too strict except for some very simple
cases. It basically prevented multiple constraints of the same type
as e.g. an intermediate CA certificate that has permitted name constraints
for example.org and example.com couldn't issue acceptable certificates
because any SAN with one domain would get rejected by the other
constraint. According to RFC 5280 matching one constraint is enough.
Also fixed is an issue with name constraints for IP addresses which were
previously only supported for a single level.
OpenSSL stores the serial number for an X509 certificate as an
`ASN1_INTEGER` type. Within BoringSSL (and AWS-LC), the library
represents the value of zero as an empty array [1] which is different
from OpenSSL which represents it as the 1-byte array [0x00]. Though the
value of zero for the certificate serial number is illegal under
X.509 [2], we need to handle/encode it consistently within strongSwan.
From 18082ce2b0 ("certificates: Retrieve serial numbers in canonical
form"), we infer that the canonical representation of the zero serial
is [0x00]. To do this, we introduce `openssl_asn1_int2chunk` to
complement the existing string version that allows us to handle the
special case for zero instead of always returning a reference to the
library-dependent encodings.
References strongswan/strongswan#1907Closesstrongswan/strongswan#2138
[1] https://github.com/google/boringssl/commit/bdc35b63617f78037768f4897d8835696f02181a
[2] https://datatracker.ietf.org/doc/html/rfc5280#section-4.1.2.2
AWS-LC lacks support for a number of elliptic curve algorithms so this
adds some conditional macros to avoid registering the related plugin
features. Support for curves ed448 and x448 is completely absent and are
not planned for implementation as they are no longer recommended for use.
While ed25519 is supported by the library, a single missing API for
ASN.1 DER encoding of its private keys is missing which prevents its
use in strongSwan. Future work may remove this limitation, but for now
we will disable the functionality.
Closesstrongswan/strongswan#2109
AWS-LC is a BoringSSL-based libcrypto implementation. SHA_CTX is declared with
the hash data specified as an array rather than as a field in upstream OpenSSL.
Since AWS-LC builds against C99, we are unable to handle this with anonymous
unions like BoringSSL. The workaround I propose is to add these conditional
macros around the accessors within openssl_sha1_prf. After this change,
everything builds successfully with AWS-LC headers.
Closesstrongswan/strongswan#2103
Newer curl versions (as used on macOS via Homebrew) add attributes like
__attribute__ ((format(printf, a, b)))
to their `curl_*printf*` functions, which fails if we redefine `printf`
as e.g. `builtin_printf` (pulled in via library.h). We could disable
these checks via CURL_NO_FMT_CHECKS, but reordering the headers should
do the trick as well.
Some servers might not support a length of 32 and return a malformed
request error. Lowering the value to the previous default of 16 could
help in that case.
The two OPTs that were used previously allowed to omit it completely (hence
the fallback to ID_ANY), but that's invalid, so it's better to fail
parsing.
The has_issuer() and issued_by() methods relied on it to be defined, so
if the OCSP response wasn't successful (i.e. OCSP status indicates an
error and no OCSP response is parsed), a null-pointer dereference was
caused if the caller checked if the OCSP response was issued by a
specific certificate.
That's a side-effect of the referenced commit. Previously, error codes
caused the OCSP response to not get parsed successfully, which technically
wasn't correct as it's well formed and successfully parsed, it's just
indicating an error state.
Fixes: 00ab8d62c0 ("x509: Support generation of OCSP responses")
Instead of the CA certificate's subjectKeyIdentifier erroneously
the CA's authorityKeyIdentifier was used as the authorityKeyIdentfier
of the certificate to be issued. This might work with a root CA
where the authorityKeyIdentifier equals its subjectKeyIdentfier
but introduces a severe regression when an intermediate CA is used.
The openxpki plugin directly access the certificates table in
the OpenXPKI's MariaDB in order to retrieve the status of an
issued X.509 certificate based on its serial number.
Instead of just generating an authorityKeyIdentifier based on the
issuer's public key, this allows CA certificates to be issued by a
different tool that doesn't use a SHA-1 hash of the subjectPublicKey
for the subjectKeyIdentifier.
Closesstrongswan/strongswan#1992
References strongswan/strongswan#1975
Tobias Brunner