Same issue with signature malleability as with Ed25519 and apparently
OpenSSL doesn't even explicitly verify that the most significant 10 bits
are all zero.
As per RFC 8032, section 5.1.7 (and section 8.4) we have to make sure s, which
is the scalar in the second half of the signature value, is smaller than L.
Without that check, L can be added to most signatures at least once to create
another valid signature for the same public key and message.
This could be problematic if, for instance, a blacklist is based on hashes
of certificates. A new certificate could be created with a different
signature (without knowing the signature key) by simply adding L to s.
Currently, both OpenSSL 1.1.1 and Botan 2.8.0 are vulnerable to this, which is
why the unit test currently only warns about it.
OpenSSL 1.1.1 introduces DRGBs and provides two sources (same security
profile etc. but separate internal state), which allows us to use one for
RNG_WEAK (e.g. for nonces that are directly publicly visible) and the other
for stronger random data like keys.
While X25519 was already added with 1.1.0a, its use would be a lot more
complicated, as the helpers like EVP_PKEY_new_raw_public_key() were only
added in 1.1.1, which also added X448.
In case a subnet is moved from one interface to another the policies can
remain as is but the route has to change. This currently doesn't happen
automatically and there is no option to update the policy or route so
removing and reinstalling the policies is the only option.
Fixes#2820.
The peer might not have seen the CREATE_CHILD_SA response yet, receiving a
DELETE for the SA could then trigger it to abort the rekeying, causing
the deletion of the newly established SA (it can't know whether the
DELETE was sent due to an expire or because the user manually deleted
it). We just treat this SA as if we received a DELETE for it. This is
not an ideal situation anyway, as it causes some traffic to get dropped,
so it should usually be avoided by setting appropriate soft and hard limits.
References #2815.
Because the file is not available on all platforms the inclusion comes
after the user options in order to disable including it. But that means
the inclusion also follows after the defined scanner states, which are
generated as simple #defines to numbers. If the included unistd.h e.g.
uses variables in function definitions with the same names this could
result in compilation errors.
Interactive mode has to be disabled too as it relies on isatty() from
unistd.h. Since we don't use the scanners interactively, this is not a
problem and might even make the scanners a bit faster.
Fixes#2806.
The sonarcloud build runs a long time now (the win32/64 builds are also
a lot slower on xenial), which increases the overall time a build takes
because we can't run these before regular matrix jobs run. So we do a
manual matrix expansion to control the order of jobs (slower first).
This also removes the TEST=default build with GCC as that's basically
what TEST=dist does (except for forcing the printf implementation)
On Nov 12, the scanner was updated and now takes a lot more time (about
3 times as much). Using two threads reduces it a bit (by about 25%).
Using even more threads doesn't help or even increases the time again.
The automatically determined path for systemd units is an absolute system
path that doesn't respect $(prefix). That's a problem for make distcheck,
which is usually ran as regular user and it's not expected to have any
impact on the system (it does a local install in a subdir). To avoid
these issues we override the configure flags used by make distcheck and
set the path to one relative to the specified prefix.
According to gcrypt.h these callbacks are not used anymore since
version 1.6 and with clang these actually cause deprecation warnings
that let the build on travis (-Werror) fail.
This installs tmux and its two dependencies libevent-2.0-5 and libutempter0.
For the tnc/tnccs-20-ev-pt-tls test scenario older, apparently replaced
versions of these packages are entered to the collector.db database, so that
dummy SWID tags for these packages can be requested via SWIMA.
Also includes some changes for jessie's version of FreeRADIUS 2 (was
previously a custom version).
Besides the move to a subdir the config files were adapted for 3.0.
The rlm_sim_files module was removed with FreeRADIUS 3 and Debian's
package of FreeRADIUS 2 does not ship it, so we now replicate it using
the files module (via users file, which is actually a symlink to
mods-config/files/authorize in the default installation of FreeRADIUS 3).
Another approach was tried using rlm_passwd, however, that module does
not read binary/hex data, only printable strings, which would require
changing the triplets.
For 2.x a hack in the site config is necessary to make the attributes
available to the EAP-SIM module.
Debian stretch's init script for isc-dhcp-server uses the INTERFACESv4|6
variables to decide whether to start the v4 and/or v6 DHCP server.
If they are not empty, the daemon is started for the respective version,
however, if both are empty (the default), to listen on all interfaces, the
daemon is started for both versions. The latter would require a subnet
config for IPv6 as the daemon otherwise exits, letting the init script fail,
while keeping the successfully started v4 version running, which, in turn,
can't be stopped anymore with the init script because it thinks the daemon
is not running.
So it's not possible with this init script to start DHCPv4 on all interfaces
without having to configure and run DHCPv6 also.
While we could continue to use FreeRADIUS 2.x that branch is officially EOL.
So instead of investing time and effort in updating/migrating the patches to
FreeRADIUS 3.x (the module changed quite significantly as it relies solely on
the naeap library in that release), for a protocol that is superseded anyway,
we just remove these scenarios and the dependencies. Actually, the
complete rlm_eap_tnc module will be removed with FreeRADIUS 4.0.
This is because OpenSSL 1.1 started to use atexit()-handlers of its own
to clean up. Since the plugin is loaded and initialized after libcharon,
OpenSSL's cleanup functions ran before the daemon was properly
deinitialized (i.e. worker threads were still running and OpenSSL might
still be used during the deinit). So several of OpenSSL's internal
structures were already destroyed when libcharon_deinit() was eventually
called via our own atexit()-handler.
The observed behavior was that the daemon couldn't be terminated properly
anymore for some test scenarios (only three TNC scenarios were affected
actually). When the daemon tried to send the DELETE for the established
IKE_SA during its termination it got stuck in OpenSSL's RNG_WEAK
implementation (used to allocate random padding), which apparently tries
to acquire an rwlock that was already destroyed. The main thread then
just busy-waited indefinitely on the lock, i.e. until systemd killed
it eventually after a rather long timeout.
We'll probably have to apply similar changes to other apps/scripts that
load plugins and currently use atexit() to clean up. Although some
scripts (e.g. dh_speed or hash_burn) are not affected because they
register the deinitialization after loading the plugins.
Checking for whitelisted functions in every backtrace is not very
efficient. And because OpenSSL 1.1 does no proper cleanup anymore until
the process is terminated there are now a lot more "leaks" to ignore.
For instance, in the openssl-ikev2/rw-cert scenario, just starting and
stopping the daemon (test vectors are checked) now causes 3594 whitelisted
leaks compared to the 849 before. This prolonged the shutdown of the
daemon on each guest in every scenario, amounting to multiple seconds of
additional runtime for every affected scenario. But even with this
patch there is still some overhead, compared to running the scenarios on
jessie.
RC4, which was previously used for performance reasons, is not supported
anymore with newer versions of SSH (stretch still supports it, but it
requires explicit configuration on the guests when they act as clients
too - the version in Ubuntu 18.04 apparently doesn't support it anymore
at all).
AES-GCM should actually be faster (at least for larger amounts of data and
in particular with hardware acceleration).
ClientAuthentication is known in OpenSSL 1.1 and the redefinition, therefore,
causes an error. These two OIDs are not used anyway in these config
files.
This adds the ability to return supported signature schemes (and
parameters) from a private key.
This is useful for keys on a TPM 2.0 as these can be used only with a
particular scheme (the hash algorithm and for RSA even the padding scheme
is fixed). For RSA with PSS padding there is an additional complication
because different TPMs use different salt lengths, which we have to know
beforehand to correctly produce e.g. a certificate request (the signature
covers the algorithm identifier that describes the signature scheme).
It turned out that the new method is also useful for the agent plugin.
Newer ssh/gpg-agents support SHA-256 and SHA-512 for RSA signatures, but
not SHA-384, which we can now convey to the pubkey authenticator.
Unfortunately, older agents ignore the flags that request a SHA2 signature
and just return one with SHA-1, in such scenarios IKEv2 signature
authentication has to be disabled.
SHA-384 is not supported but is selected by signature_schemes_for_key()
for keys between 3072 and 7680 bits.
Since this is only called for IKEv2 signature authentication we don't
even provide SHA-1 anymore. We always provide both schemes, though,
which is what pubkey-authenticator does too for RSA.
Older agents apparently just ignore the flags and always return a SHA-1
signature. If that's the case, charon.signature_authentication has to
be disabled.
On newer Android versions (8+) this does not seem to be necessary (adding
the onClick handler also sets "clickable" and that in turn seems to make
it focusable), however, for older releases it is (tested with 7.1.1
keyboard navigation just skips over the button). This was seen on a
Fire TV stick.
It looks like Android 9 incorrectly continues to use the regular DNS
servers after the blocking TUN device is replaced with the actual
interface. Setting DNS servers prevents that (since all traffic is
blocked, which ones doesn't really matter but local/loopback addresses
are rejected).
Interestingly, if the VPN server later does not assign any DNS servers, there
is no fallback to the non-VPN DNS servers for some reason (that's definitely
not as documented). This could potentially be a problem as we don't
offer an option to configure DNS servers in the VPN profile.
Neither issue is seen on older Android versions (only tested on 7.1.1).
Not sure when this happens exactly, in particular because the reported
stack traces look like this
java.lang.NullPointerException:
at org.strongswan.android.ui.VpnTileService.updateTile (VpnTileService.java:220)
at org.strongswan.android.ui.VpnTileService.onStartListening (VpnTileService.java:97)
at android.service.quicksettings.TileService$H.handleMessage (TileService.java:407)
which violates the API documentation for getQsTile(), which states:
This tile is only valid for updates between onStartListening() and
onStopListening().
But apparently that's not always the case. There have been two reports
of such a crash, both on Android 8.0 and on Xiaomi Mi 5/6 devices, so
maybe it's a bug in that particular image.
The previous code lost track of the selected profile IDs, but the
widgets maintained their state (i.e. the list item was still selected and the
edit button still enabled). Clicking the edit button then caused a crash when
trying to get the first item in the set.
Tobias Brunner