The previous code did not ensure that there was a delay of at least
`try` seconds after each sent request. Instead, whenever the condvar was
signaled, which could be due to retransmitted responses or messages for
unrelated transactions (there could even be spurious wakeups), the counter
was increased and a retransmit sent. So instead of actually waiting for
15 seconds for a response (and sending 4 retransmits over that timespan),
it could happen that all five messages were sent within a second without
enough time to actually receive a response.
Using an absolute timeout that we reuse as long as there was no timeout
and the condvar was signaled for something unrelated, should ensure we
wait at least the intended delay after each sent message.
Closesstrongswan/strongswan#1154
This allows using the upper parts of the marks for other purposes. For
instance, with `mark_in=mark_out=%unique/0x0000ffff` mark values in the
upper two bytes would not get reset by the rules installed by this plugin.
However, note that in this example the daemon would have to get restarted
after 65'535 CHILD_SAs to reset the counter for unique marks, which is a
global 32-bit counter that's unaware of any masks.
Closesstrongswan/strongswan#1087
get_traffic_selectors() is called the same way also as responder when
selecting child configs via peer_cfg_t::select_child_cfg(). Replacing
TS for all child configs could lead to selecting one that later fails
to actually narrow the traffic selectors. Ignoring non-matching TS also
helps if we have a trap config with multiple remote subnets (otherwise,
we'd have to filter duplicates afterwards).
When installing traps, the hosts might be %any, in which case we allow
the configured (technically non-matching) TS for the wildcard use case.
Fixes: da82786b2d ("child-cfg: Always apply hosts to traffic selectors if proposing transport mode")
Closesstrongswan/strongswan#1143
Setting -Werror in CFLAGS passed to configure is not ideal as that affects
all the checks performed by the script.
This caused an issue with newer versions of Autoconf and the AC_PROG_LEX
macro that insisted on finding a lexer library. But due to warnings from
the generated test lexer (misleading indentation) that got turned into
errors no library was found (none would have been necessary), so LEX was
not set and no lexers were built.
With this option enabled, we add -Werror to CFLAGS after all tests ran.
It also enables additional warnings via -Wextra.
The option is auto-enabled when building from the repository.
Making the variable volatile avoids a "variable ‘failure’ might be
clobbered by ‘longjmp’" warning (or error when compiling with
-Werror) that's triggered via -Wextra.
The 5.4.0 update changed the default bignum implementation to what
could explicitly be enabled via `--enable-sp-math-all`. Since this uses
fixed-sized buffers sufficient for key sizes of SP_INT_BITS, with a default
of 4096, modp6144 and modp8192 didn't work anymore (wc_DhGenerateKeyPair()
returned MP_EXPTMOD_E). So we have to adapt the feature checks for this.
To support the larger DH groups we can either increase the buffer size
via `--with-max-rsa-bits` or add `--enable-heapmath` so buffers get
(re-)allocated as needed. We go with the latter for now.
This merge includes changes that were created for the upcoming IKEv2
extension for multiple key exchanges over the last four years, but which
are not directly related to the actual protocol changes.
Changes include renaming diffie_hellman_t to the more generic
key_exchange_t (also renamed are some of the interface's methods),
making utility functions that deal with DH groups more generic, and let
tasks handle the first IKE_AUTH message more reliably by not depending
on e.g. specific message IDs.
One significant change is delaying the IKEv2 key derivation until
the keys are actually needed to process or send the next message. So
instead of deriving the keys directly while processing an IKE_SA_INIT
request (which could come from a spoofed address), this is delayed until
the corresponding IKE_AUTH request is received. Implementations of the
key_exchange_t interface are now expected to do the key derivation and
any costly public key validation in get_shared_secret() and not
set_public_key().
Sent IKE_SA_INIT messages are now also not pre-generated anymore to collect
their encoding for the authentication. Instead, a new post_build() hook
allows the ike-auth task to do so after the actual message has been built,
which allows later tasks and plugins (via message() hook) to modify the
message (e.g. add notifies) after the ike-auth task's build() method
already ran.
Also changed is how inbound requests are processed and retransmits are
detected. Instead of parsing all inbound messages right away (which
might trigger a key derivation or require keys we don't have anymore in
the multi-KE use case), we now first check a request's message ID and
compare its hash to that of the previous request to decide if it's a
valid retransmit. For fragmented messages, we only keep track of the
first fragment so we can send the corresponding response immediately if
a retransmit of it is received, instead of waiting for all fragments
and reconstructing the message, which we did before.
This way we avoid having to pre-generate the message when it could
theoretically still get modified by a task that follows or from a plugin
via message() hook.
In particular as responder, this delays costly cryptographic operations
until the IKE_AUTH request is received, which is preferable to reduce
the impact of DoS attacks.
Another advantage is that the key material is not changed until all tasks
built or processed a message.
This way we avoid parsing messages with unexpected message IDs, which
might not even be possible if we don't have the keys anymore. However,
the next commit should avoid the latter and this way we avoid deriving
keys for retransmits or unexpected messages.
This also changes how retransmits for fragmented messages are triggered.
Previously, we waited for all fragments and reconstructed the message
before retransmitting the response. Now we only track the first
fragment and if we receive a retransmit of it respond immediately
without waiting for other fragments (which are now ignored). This is in
compliance with RFC 7383, section 2.6.1, and can avoid issues if there
are lots of fragments.
This way we can use the IKE_REKEYED state for both redundant and old SAs
to suppress ike_updown().
In the ike-delete task we don't suppress events in state IKE_REKEYING as
that's the case when we delete an SA the peer is currently rekeying with
multiple key exchanges.
This gives us more flexibility with tasks that return NEED_MORE (currently
none of the colliding tasks do, but that will change with multi-KE
rekeyings). The active task has to check itself if the passive task is
done and should be removed from the task manager.
Since f67199378d ("ike-rekey: Handle undetected collisions also if
delete is delayed") we only ever track tasks of type TASK_IKE_REKEY, so
there is no need to check the type or use the generic task_t interface.
Also changed some of the comments to clarify collision handling.
If the peer successfully rekeyed the SA it gets marked as IKE_REKEYED
and it remains until the peer deletes it (or a timeout). There is no
point in rekeying such SAs again.
IKE_REKEYING will be relevant if we have multi-KE rekeyings and are
waiting for followup key exchanges for a passive rekeying.
This avoids the use of a variable length array, which should probably
be avoided in general due to potential performance, portability and
security issues (not in this particular case, though).
Closesstrongswan/strongswan#1095
The compiler warned that a dangling pointer might be used because `name`,
which is returned from the function via `ima_name`, might point into the
locally determined `uri`. Determining the URI outside and passing it to
the function fixes this.
GCC assumes this->b is zero (or may be zero) and spits out the following
warning (or error with -Werror):
src/libstrongswan/plugins/fips_prf/fips_prf.c:124:12: error: array subscript 18446744073709551615 is above array bounds of ‘uint8_t[<U8090>]’ {aka ‘unsigned char[<U8090>]’} [-Werror=array-bounds]
124 | one[this->b - 1] = 0x01;
| ~~~^~~~~~~~~~~~~
Even though the assignment of `removed` to `out_row` is tied to the
`found_removed` flag, which is only set if `removed` is set, the
compiler complains that it may be used uninitialized.
GCC 12 produces weird code when a callback is called directly (e.g.
parse_bool() via parse_option() in vici_config.c). Instead of the actual
pointer, it explicitly passes 0 as first argument, which likely causes
a segmentation fault. It doesn't happen when called indirectly via
function pointer that has void* as first argument, which this patch
kinda replicates for direct calls to avoid the issue.
Closesstrongswan/strongswan#1053
These only apply to the usage reports that are available via
`stroke memusage`, not to leak reports when executables are terminated,
which always include all non-whitelisted leaks.
This should make it clearer to what the log messages generated by
verify_trust_chain() are related (in particular if building the chain
fails or the cert has expired).
Adds support for GTK 4. Two versions of the UI are built as shared
objects, the plugin dynamically loads and instantiates the appropriate one
based on the determined GTK version.
Closesstrongswan/strongswan#961
GTK4 does not support buttons at the bottom, so we put them in a header
bar, which is the preferred layout by current desktop environments. And
while it doesn't look ideal on older desktops, it also works with GTK3
and changing it avoids having to maintain multiple UI files.
Note that this layout is not supported by glade, so we generally can't
use it to edit the GUI anymore (it also doesn't support GTK4 in general).
This ensures the plugin is available if AES-based PRFs could get used or
none of the third-party crypto plugins is enabled and it's required for
HMAC-based PRFs as well.
References strongswan/strongswan#1026
A recent security fix for Git added a fatal error if the directory that
contains the .git directory is not owned by the user that runs git in
that directory tree:
Determine strongSwan version fatal: unsafe repository ('...' is owned by someone else)
To avoid this, we call the git commands as owner of the source
directory (the script has to run as root, so this is no problem).
The user/group ID and name is now also determined via `stat(1)` so it
directly depends on the actual source dir and should work even when not
using sudo.
mallinfo() is deprecated because it uses `int` for the members of the
returned struct, whereas mallinfo2() uses `size_t`. It's available
since glibc 2.33.
The external-id parameter takes an int32 and the generated run_id was
apparently not valid lately, resulting in undocumented 404 errors when
submitting patches (the API endpoint probably doesn't like negative numbers
because the last accepted id was 2059658094, rejected ids were e.g.
2167472705 or 2168792083).
More of this code was already removed with previous commits.
While versions < 1.1.1 are not officially supported anymore, 1.0.2 might
still be in use because before 3.x that was the latest version with
official FIPS support (OpenSSL apparently also provides extended commercial
support for it).
Tobias Brunner