If this is disabled the schemes configured in `rightauth` are only
checked against signature schemes used in the certificate chain and
signature schemes used during IKEv2 are ignored.
Disabling this could be helpful if existing connections with peers that
don't support RFC 7427 use signature schemes in `rightauth` to verify
certificate chains.
This enables late connection switching based on the signature scheme used
for IKEv2 and allows to enforce stronger signature schemes.
This may break existing connections with peers that don't support RFC 7427
if signature schemes are currently used in `rightauth` for certificate chain
validation and if the configured schemes are stronger than the default used
for IKE (e.g. SHA-1 for RSA).
We use the new signature authentication instead for this. This is not
backward compatible but we only released one version with BLISS support,
and the key format will change anyway with the next release.
There is a similar function to map key_type_t and hasher_t to an OID,
but this maps schemes directly (and to use the other function we'd
have to have a function to map schemes to hash algorithms first).
The previous code allowed an attacker to slip in an IKE_SA_INIT with
both SPIs and MID 1 set when an IKE_AUTH would be expected instead.
References #816.
It is mandated by the RFCs and it is expected by the task managers.
Initial messages with invalid MID will be treated like regular messages,
so no IKE_SA will be created for them. Instead, if the responder SPI is 0
no SA will be found and the message is rejected with ALERT_INVALID_IKE_SPI.
If an SPI is set and we do find an SA, then we either ignore the message
because the MID is unexpected, or because we don't allow initial messages
on established connections.
There is one exception, though, if an attacker can slip in an IKE_SA_INIT
with both SPIs set before the client's IKE_AUTH is handled by the server,
it does get processed (see next commit).
References #816.
This reverts 8f727d8007 ("Clean up IKE_SA state if IKE_SA_INIT request
does not have message ID 0") because it allowed to close any IKE_SA by
sending an IKE_SA_INIT with an unexpected MID and both SPIs set to those
of that SA.
The next commit will prevent SAs from getting created for IKE_SA_INIT messages
with invalid MID.
Fixes#816.
While these files are generated they don't really change and are not
architecture dependant. The previous solution prevented cross-compilation
from the repository as `bliss_huffman` was built for the target system but
was then executed on the build host to create the source files, which
naturally was bound to fail.
The `recreate-bliss-huffman` make target can be used inside the bliss
directory to update the source files if needed.
Fixes#812.
If the MySQL client library is linked against OpenSSL the mysql plugin
will cause a segmentation fault when it is unloaded after the openssl
plugin has already been deinitialized. This is very similar to the issues
with curl (see 44b6a34d43).
Fixes#814.
Coverity is still not happy when the result of an integer division is
assigned to a double (without e.g. casting the result to an int first to
indicate the intent). The shift should avoid this issue.
Before this fix it was possible to crash charon with an IKE_SA_INIT
message containing a KE payload with DH group MODP_CUSTOM(1025).
Defining MODP_CUSTOM outside of the two byte IKE DH identifier range
prevents it from getting negotiated.
Fixes CVE-2014-9221.
The FreeBSD and Mac OS X kernels interpret sadb_sa_replay as the size of the
replay window in bytes. Linux on the other hand does the same for PF_KEY it
does for XFRM so sadb_sa_replay denotes the number of packets/bits in the
window. Similarly, the window size on Linux is limited to 32 by the four
byte default bitmap used for IPsec SAs (may only be changed with
XFRMA_REPLAY_ESN_VAL), which is not the case on the other platforms.
Since 42e0a317c6 ("ike: Only parse payloads valid for the current IKE
version") payload types are checked before creating objects. This check
failed for internally used payload types (e.g. proposal substructures),
which have a type >= 256, i.e. outside the IKE payload type range.
This requires moving test files so that the Makefile for the tests can be
included after building libstrongswan, which requires the plugin when
building monolithically. Due to this a static helper library is required
as directly referring to object files (or source files) is not possible.
It's also necessary to avoid any link-time dependency on libstrongswan in
bliss_huffman, to avoid circular dependencies (bliss_huffman -> libstrongswan
-> bliss -> bliss_huffman).
Theoretically, n could be zero and these variables are then used
uninitialized. Older GCC versions warn about this and on Travis where we
compile with -Werror this causes the tests to fail.
The transform identifier used in AH transforms is not the same as the
authentication algorithm identifier used in the transform attributes in
AH (and ESP) transforms.
The OID (1.3.6.1.4.1.3029.1.2) is technically not correct, the correct
one is (1.3.6.1.4.1.3029.1.1.2). Every other library or tool (like OpenSSL)
uses the incorrect one so we do the same.
References #740.
iOS and Mac OS X clients establish individual IPsec SAs for the traffic
selectors received in Split-Include attributes (might have been different
in earlier releases). If we return 0.0.0.0/0 as TSr that either results
in a bunch of Quick Mode exchanges (for each TS), or with the latest
client releases an error notify (ATTRIBUTES_NOT_SUPPORTED).
We also can't install the IPsec SA with all configured subnets as that
would cause conflicts if the client later negotiates SAs for other subnets,
which iOS 8 does based on traffic to such subnets.
For Shrew and the Cisco client, which propose 0.0.0.0/0, we still need to
override the narrowed TS with 0.0.0.0/0, as they otherwise won't accept
the Quick Mode response. Likewise, we also have to narrow the TS before
installing the IPsec SAs and policies.
So we basically have to follow the client's proposal and only modify TSr
if we received 0.0.0.0/0. Since we don't get the original TS in the
narrow hook we handle the inbound QM messages and make note of IKE_SAs on
which we received a TSr of 0.0.0.0/0.
Fixes#737.
If no offline leases are available for the current client and assigning online
leases is disabled, and if all IPs of the pool have already been assigned to
clients we look for offline leases that previously were assigned to other
clients.
In case the current client has online leases the previous code would
replace the existing mapping entry and besides resulting in a memory leak
the online leases would be lost forever (even if the client later releases
the addresses). If this happens repeatedly the number of available addresses
would decrease even though the total number of online and offline leases seen
in `ipsec leases` would indicate that there are free addresses available.
Fixes#764.
This adds support for EAP-TLS authentication on Android.
EAP-only authentication is currently not allowed because the AAA identity
is not configurable, so to prevent anyone with a valid certificate from
impersonating the AAA server and thus the gateway, we authenticate the
gateway (like we do with other authentication methods).
Also, it's currently not possible to select a specific CA certificate to
authenticate the AAA server certificate, so it either must be issued by the
same CA as that of the gateway or automatic CA certificate selection must
be used.
Without verification of the identity we can't prevent a malicious user
with a valid certificate from impersonating the AAA server and thus the
VPN gateway. So unless we make the AAA identity configurable we have to
prevent EAP-only authentication.
Adds support to configure address pools as ranges (from-to) in
ipsec.conf and swanctl.conf.
The first and last addresses in subnet based pools are now skipped
properly and the pools' sizes are adjusted accordingly. Which is also
the case if pools are configured with an offset, e.g. 192.168.0.100/24,
which reduces the number of available addresses from 254 to 155, and
assignment now starts at .100 not .101, i.e. .100-.254 are assignable
to clients.
References #744.
Previously one more than the first and last address was ignored.
And if the base address is not the network ID of the subnet we
should not skip it. But we should adjust the size as it does not
represent the actual number of IP addresses assignable.
Otherwise fragmented CREATE_CHILD_SA exchanges won't get accepted
because they don't contain an SA payload.
It also prevents a warning when ordering payloads.
Fixes#752.
Tobias Brunner