This commit reverts 84738b1a and 2ed5f569.
As we have no DH group available in the KE payload for IKEv1, the verification
can't work in that stage. Instead, we now verify DH groups in the DH backends,
which works for any IKE version or any other purpose.
While 0909bf6c explicitly includes the whole source tree (to cover README.md),
this has the unpleasant side effect of covering a workspace under "testing"
with all its sources, or any other potential subdirectory that exists.
As the plugin has its origins in the sql plugin, it still uses the naming
scheme for the attribute provider implementation. Rename the class to better
match the naming scheme we use in any other plugin
In addition that it may reduce memory usage and improve performance for large
responses, it returns immediate results. This is important for longer lasting
commands, such as initiate/terminate, where immediate log feedback is preferable
when interactively calling such commands.
To simplify handling of authentication rounds in dictionaries/hashtables on the
client side, we assign unique names to each authentication round when listing
connection.
An uninstall target is currently not supported, as there is no trivial way with
either plain setuptools or with easy_install. pip would probably be the best
choice, but we currently don't depend on it.
IKE is very strict in the length of KE payloads, and it should be safe to
strictly verify their length. Not doing so is no direct threat, but allows DDoS
amplification by sending short KE payloads for large groups using the target
as the source address.
If additional tasks get queued before/while rekeying an IKE_SA, these get
migrated to the new IKE_SA. We previously did not trigger initiation of these
tasks, though, leaving the task unexecuted until a new task gets queued.
As the startup timestamp needs 10 characters, we only have left 4 characters
for the IKE_SA unique identifier. This is insufficient when having 10000 IKE_SAs
or more established, resulting in non-unique session identifiers.
Fixes#889.
We are actually not in rekeying state, but just trigger a separate, new IKE_SA
as a replacement for the current IKE_SA. Switching to the REKEYING state
disables the invocation of both IKE and CHILD_SA updown hooks as initiator,
preventing the removal of any firewall rules.
Fixes#885.
While a passively installed IKE_SA does not queue a DPD timeout job, one that
switches from active to passive might execute it. Ignore such a queued job if
the IKE_SA is in passive state.
The current "inbound" flag is used for two purposes: To define the actual
direction of the SA, but also to determine the operation used for SA
installation. If an SPI has been allocated, an update operation is required
instead of an add.
While the inbound flag normally defines the kind of operation required, this
is not necessarily true in all cases. On the HA passive node, we install inbound
SAs without prior SPI allocation.
While the the meaning of the "inbound" flag on the kernel_interface->add_sa()
call is not very clear, we still need that update logic to allow installation of
inbound SAs without SPI allocation. This is used in the HA plugin as a passive
node.
This reverts commit 698ed656.
While this change results in the correct add/update flag during installation,
it exchanges all other values in the child_sa->install() call. We should pass
the correct flag, but determine the add/update flag by other means.
This reverts commit e722ee5d.
While the comment is rather clear that we should not adopt live CHILD_SAs
during reauthentication in IKEv2, the code does nonetheless. Add an additional
version check to fix reauthentication if the reauth responder has a replace
uniqueids policy.
Fixes#871.
Introduces basic support for EAP server module authentication constraints. With
EAP-(T)TLS, public key, signature and end entity or CA certificate constraints
can be enforced for connections.
Fixes#762.
Remove all previously loaded certificates during "ipsec reread", finally
allowing the removal of CA certificates from a running daemon.
Fixes#842, #700, #305.
This makes these CA certificates independent from the purge issued by reread
commands. Certificates loaded by CA sections can be removed through ipsec.conf
update/reread, while CA certificates loaded implicitly from ipsec.d/cacerts
can individually be reread using ipsec rereadcacerts.
Under some conditions it can happen that the CREATE_CHILD_SA exchange for
rekeying the IKE_SA initiated by the peer is successful, but the delete message
does not follow. For example if processing takes just too long locally, the
peer might consider us dead, but we won't notice that.
As this leaves the old IKE_SA in IKE_REKEYING state, we currently avoid actively
initiating any tasks, such as rekeying or scheduled DPD. This leaves the IKE_SA
in a dead and unusable state. To avoid that situation, we schedule a timeout
to wait for the DELETE message to follow the CREATE_CHILD_SA, before we
actively start to delete the IKE_SA.
Alternatively we could start a liveness check on the SA after a timeout to see
if the peer still has that state and we can expect the delete to follow. But
it is unclear if all peers can handle such messages in this very special state,
so we currently don't go for that approach.
While we could calculate the timeout based on the local retransmission timeout,
the peer might use a different scheme, so a fixed timeout works as well.
Fixes#742.
If a system uses routing metrics, we should honor them when doing (manual)
routing lookups for IKE. When enumerating routes, the kernel reports priorities
with the RTA_PRIORITY attribute, not RTA_METRICS. We prefer routes with a
lower priority value, and fall back to longest prefix match priorities if
the priority value is equal.
Referencing $(srcdir) in the gemspec is not really an option, as "gem build"
includes the full path in the gem, so we need to build in $(srcdir). As there
does not seem to be a way to control the output of "gem build", we manually
move the gem to $(builddir) in OOT builds.
The inbound flag is used to determine if we have to install an update or a new
SA in the kernel. As we do not have allocated SPIs and therefore can't update
an existing SA in the HA plugin, always set the flag to FALSE.
Before 698ed656 we had extra logic for that case, but handling it directly in
the HA plugin is simpler.
While d0d85683 works around a crasher related to the use of libunwind, other
build hangs have been seen in the all test cases. Try to
--disable-unwind-backtraces to see if libunwind is really related to those
and if it fixes these issues.
While it is currently unclear why it happens, canceling threads waiting in the
new_query condvar does not work as expected. The behavior is not fully
reproducible: Either cancel(), join() or destroying the condvar hangs.
The issue has been seen in the http-fetcher unit tests, where the stream service
triggers the use of the resolver for "localhost" hosts. It is reproducible with
any cleanup following a host_create_from_dns() use on a Ubuntu 14.04 x64 system.
Further, the issue is related to the use of libunwind, as only builds with
--enable-unwind-backtraces are affected.
As we broadcast() the new_query condvar before destruction, a hard cancel() of
these threads is actually not required. Instead we let these threads clean up
themselves after receiving the condvar signal.
Ubuntu 12.04 does not seem to provide a sane pkg-config for libiptc or libip4tc.
The monolithic build fails due to missing symbols, so disable it until we have
a newer Ubuntu release.
Unloading libraries calls any library constructor/destructor functions. Some
libraries can't handle that in our excessive unit test use. GnuTLS leaks
a /dev/urandom file descriptor, letting unit tests fail with arbitrary
out-of-resources errors.
Implement a forecast plugin that supports forwarding of multi- and broadcast
messages between a LAN and clients or between connected clients. It uses
IPsec policy marks to send packets over multiple identical multi- and broadcast
policies.
Introduce a connmark plugin that uses Netfilter conntracks mark to select the
correct return-path SAs for client-initiated connections. This can be used
to distinguish transport mode clients behind the same NAT router.
Fixes#365.
In this test two hosts establish a transport mode connection from behind
moon. sun uses the connmark plugin to distinguish the flows.
This is an example that shows how one can terminate L2TP/IPsec connections
from two hosts behind the same NAT. For simplification of the test, we use
an SSH connection instead, but this works for any connection initiated flow
that conntrack can track.
Martin Willi