Calling stream_t::destroy from the stream_t::on_read callback will
block the thread in watcher_t::remove because the FD is currently "in
callback". A similar issue was fixed in the lookip plugin with
961409b668 ("lookip: Disconnect asynchronously to avoid dead-locking
watcher unregistration").
Fixes: 85ebf6abd4 ("whitelist: Add error handling to socket reads and fix a memory leak")
This doesn't really seem useful (perhaps it was before we started to
configure the outbound interface on our routes). And it can actually
cause the route installation to fail e.g. for routes over point-to-point
interfaces where we'd get "Error: Nexthop has invalid gateway" errors.
Note that we can't return NULL if we find an interface as e.g. the updown
plugin uses this method to determine the outbound interface (it ignores
the nexthop), which it passes to the script. If we returned NULL, it
would pass "unknown" instead, which would cause the firewall rules to
mismatch. While it seems that 0.0.0.0/:: is ignored as nexthop by the
kernel on the installed route, I still explicitly ignore such addresses
to avoid any unintended side-effects.
The automatic route installation in the ikev2/shunt-manual-prio scenario
had to be disabled on the clients. The reason is that the route in table
220 won't have a nexthop set (the peers are directly connected), so when
trying to reach alice or venus via SSH, which matches the port-specific
bypass policies for which we don't install throw routes, the hosts will
do ARP requests for the target IPs instead of routing the packets via
moon.
Closesstrongswan/strongswan#2548
The action causes errors because it is not compatible to the Docker
version used in the runner images. Unfortunately, it doesn't seem
maintained anymore. The action is simple enough, though, so instead of
switching to a fork, we just use "docker run" directly.
Adds support for ICMP error forwarding that the kernel supports properly
since v6.9 (it still sends locally generated errors from the wrong source
IP, though).
While 3c12905103 ("ipsec: Add function to compare two ipsec_sa_cfg_t
instances") added a comparison function to avoid issues with non-zeroed
padding, hashes were still calculated using chunk_hash().
If a CHILD_SA is rekeyed using a CREATE_CHILD_SA request, a subsequent
DELETE for the old CHILD_SA may time out. Before sending this DELETE,
a CHILD_REKEYED state CHILD_SA set from child_rekey::process_i() is
immediately set to CHILD_DELETING from child_delete::build_i(). If the
IKE_SA dies due to a retransmission timeout of this DELETE, a redundant
child-down event is issued for the rekeyed CHILD_SA that has already seen a
child-rekey event.
A reproducer shows the following log and events:
[CFG] vici rekey CHILD_SA #533
[IKE] establishing CHILD_SA XXX{534} reqid 20
[ENC] generating CREATE_CHILD_SA request 0 [ N(REKEY_SA) SA No KE TSi TSr ]
[ENC] parsed CREATE_CHILD_SA response 0 [ SA No TSi TSr ]
[IKE] rekeyed CHILD_SA XXX{533} with SPIs ca997de6_i cd27d4fe_o with XXX{534} with SPIs ced1cd01_i c460a7c9_o
Event: child-rekey
[OLD SA] state: REKEYING, spi-in: ca997de6
[NEW SA] state: INSTALLED, spi-in: ced1cd01
[IKE] closing CHILD_SA XXX{533} with SPIs ca997de6_i (352 bytes) cd27d4fe_o (264 bytes) and TS 0.0.0.0/0 === 10.11.9.40/29
[IKE] sending DELETE for ESP CHILD_SA with SPI ca997de6
[ENC] generating INFORMATIONAL request 1 [ D ]
[IKE] retransmit 1 of request with message ID 1
[IKE] retransmit 2 of request with message ID 1
[IKE] retransmit 3 of request with message ID 1
[IKE] retransmit 4 of request with message ID 1
[IKE] giving up after 4 retransmits
Event: child-updown
[SA] state: DELETING, spi-in: ca997de6
Event: child-updown
[SA] state: INSTALLED, spi-in: ced1cd01
To prevent the redundant child-down event for the successfully rekeyed CHILD_SA,
check if a DELETING CHILD_SA has already removed its outbound state due to
having been rekeyed before issuing the child-down event.
Add a new exchange test exercising that a delete timeout after rekeying does
not cause a duplicate child-down event.
Uses a separate default plugin list for swanctl (instead of just loading
all of libstrongswan's plugins) to avoid some side-effects of loaded but
unused plugins. The load statements in the regression tests have been
updated accordingly.
A new configure option for maintainers of distributions that ship
plugins in separate packages changes the message if a plugin is not
found and reduces its log level. This confused users of tools that don't
use modular plugin loading (e.g. pki or swanctl).
Also changes command line handling in pki and swanctl so that the shared
options can be passed before the actual command and that the debug level
also affects library/plugin initialization.
References strongswan/strongswan#2971
Similarly to the previous commit for pki, this allows setting these
options before the command, and by pre-parsing them we can see log
messages during the initialization.
This allows setting the log level before initializing the library and
loading the plugins, as well as having the top-level command itself in
an options file.
Distributions like Debian/Ubuntu ship the plugins in multiple packages
that are not all installed by default. When running tools like pki or
swanctl, which don't use modular loading with config snippets by default,
there are errors in the output if these packages and plugins are
currently not available. In order to not alarm users, this change adds
a configure option that package maintainers can use. It causes the log
level of the message to increase and also adds a note that mentions that
plugins are potentially available in other packages (which should be the
case unless the user tried to load a plugin, e.g. via load statement,
that is not actually built and shipped by the package maintainers).
Loading all libstrongswan plugins isn't necessary as the tool only uses
the plugins to parse/decrypt credentials. So it's similar to pki, but
it doesn't do (online) certificate validation, access tokens, or need
access to databases.
While it's usually not an issue to load unnecessary plugins, one thing
that came up recently are the new capabilities required by the agent
plugin. Since Debian's AppArmor policy for swanctl doesn't grant them,
this produces an error message that might confuse users.
This is useful during make-before-break reauthentication, where the
new SA is created before the old one is terminated and the virtual IP
gets released.
This also changes the hash() and equals() functions to avoid potential
collisions.
References strongswan/strongswan#2967
The referenced commit ignored that INVALID_ARG was returned by this
authenticator if an unsupported signature scheme is encountered. This
caused a crash in find_alternative_eap_cfg() as no EAP identity is
stored in the current auth config.
Since we don't distinguish the situation outside of the authenticator,
we can just return FAILED.
Closesstrongswan/strongswan#2979
Fixes: 2f2e4abe3c ("ikev2: Add support to switch peer configs based on EAP-Identities")
In particular with the 2019 image, the time required often exceeded the
maximum of 60 minutes. Using lld reduces the runtime quite a bit (it's
still close to the limit, though).
This doesn't work with the old OpenSSL version we use with the 2015
image (that libeay32.lib file just doesn't seem to work), so continue
to use ld (the build on that image is the quickest anyway).
Such a recursive call occurs when sorting the array of Child SAs inside
an IKE SA that causes comparisons of the child configs and their
proposals, which in turn creates a merged array of all transform types
and that uses array_sort() and array_bsearch().
Closesstrongswan/strongswan#2926
Fixes: 8e7f379f71 ("ike-sa: Sort CHILD_SAs by CPU ID")
We explicitly use untoh16() so this warning isn't relevant:
ip_packet.c:313:42: error: taking address of packed member 'ip_len' of class or structure 'ip' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member]
Tobias Brunner