This also restores the test as it was before the referenced commit so it
again, as written in the description, demonstrates that venus is unable
to ping sun without IPsec tunnel.
Fixes: f27fb58ae0 ("testing: Update description and test evaluation of host2host-transport-nat")
Note that the mobike-nat test has been removed as it basically did the same
as the mobike-virtual-ip-nat test. Instead, the mobike-nat-mapping scenario
is added, which simulates a NAT router restart.
The addresses observed by the client behind the NAT are exactly the same if
the NAT router gets restarted.
Fixes: 2b255f01af ("ike-mobike: Use ike_sa_t::update_hosts() to trigger events")
If two threads are waiting in find_entry() and remove_entry(),
respectively, and the former is woken first, the latter remains stuck
as it won't get signaled.
If there are threads waiting in find_entry() and one in remove_entry()
and the latter is woken first by a thread calling put_entry(), the
former threads would remain stuck as they get never signaled.
This can happen if an IKE_SA is terminated forcefully shortly before
terminating the daemon. The thread that handles the terminate command
will call checkin_and_destroy(), which unregisters the IKE_SA from the
manager before destroying it. The main thread that calls flush() on the
IKE_SA manager won't wait for this SA (its entry is already gone), so
the processor and in turn the watcher job/thread might get canceled
before the first thread started deleting the VIP. It would then wait
indefinitely for a signal that can never be sent.
There is still a small chance the thread hangs in wait() if the state check
happens right before the watcher is canceled and it wasn't yet able to
deliver the event from the kernel, we counter that by rechecking the state
after a while.
If a PKCS#11 library/token doesn't provide one or more attributes via
C_GetAttributeValue(), we get back CKR_ATTRIBUTE_TYPE_INVALID (similar
for protected attributes where CKR_ATTRIBUTE_SENSITIVE is returned).
This is not an error as the spec demands that all attributes have been
processed with the unavailable attributes having set their length
field to CK_UNAVAILABLE_INFORMATION.
We use this to handle the CKA_TRUSTED attribute, which some tokens
apparently don't support. We previously used a version check to remove
the attribute from the call but even the latest spec doesn't make the
attribute mandatory (it's just in a list of "common" attributes for
CKO_CERTIFICATE objects, without a default value), so there are current
tokens that don't support it and prevent us from enumerating certificates.
Depending on how CLOCK_MONOTONIC is implemented, time_monotonic() might
return 0 within 1 second after the system is started. If that's the
case, we just default to 0 for now to avoid a crash (doesn't "hide" the
system time, but it's only the uptime anyway in this case).
Closesstrongswan/strongswan#435.
The values of `yytext` and `yyleng` might not be properly defined when
the error function is called (in particular if the lexer reached EOF).
While this might just cause non-printable characters in the output, it
could actually lead to a crash depending on where `yytext` points.
Closesstrongswan/strongswan#346.
This should give us the best performance and feature set on modern
hardware (in particular when compared to code2duo, which e.g. does not allow
nested virtualization).
Closesstrongswan/strongswan#340.
While CCM is available in earlier versions, we only use it with
OpenSSL 1.1.0 and newer because the generic control variables are not
available before and we default to GCM for them.
Closesstrongswan/strongswan#353.
On 18.04, setuptools was apparently pulled in by python-pip but is not
by python3-pip and on Ubuntu 16.04 there is an issue with tox when
installed via pip3 (syntax error in one of the dependencies) and with
pip that dependency is not even available.
That's because forks are currently not allowed to be analyzed by LGTM (unlike
with SonarCloud) so this check can't actually be successful for forks even if
variables are defined.
References strongswan/strongswan#328.
The nm test can only be done on Ubuntu 18.04 as the required libraries
are not available on newer systems.
Switch to pip3 to install tox (the only Python dependency we use).
Closesstrongswan/strongswan#327.
The lint version used on our GitHub build hosts reported these errors:
Error: Value must be ≥ 0 [Range]
db.update(TABLE_VPNPROFILE, values, KEY_ID + " = " + cursor.getLong(cursor.getColumnIndex(KEY_ID)), null);
That's because get*() expect a valid index >= 0 but getColumnIndex()
can return -1 if the column name doesn't exist.
This allows clients to send an empty certificate payload if the server
sent a certificate request. If an identity was set previously, it will
be reset so get_peer_id() may be used to check if the client was
authenticated.
The PT_TLS_AUTH_TLS_OR_SASL case currently can't be implemented properly
as TLS authentication will be enforced if a client identity is configured
on the TLS server socket.
To request client authentication if we don't know the client's identity,
it's possible to use ID_ANY. However, if we don't change the identity
get_peer_id() would still report ID_ANY after the authentication.
As client with older TLS versions, we have to ack the receipt of the server's
Finished message instead.
Fixes: 083f38259c ("tls-eap: Conclude EAP method also after processing packets")
If the reauthentication is scheduled while rekeying, the difference
might be negative, however, schedule_job() takes an unsigned int,
so the reauth would get scheduled very far in the future.
If rekeying and reauthetication coincided, the reauth job could get
scheduled to run immediately i.e. before checkin() was called. So the
new IKE_SA would not get reauthenticated, however, the further delayed
delete job would later find the new IKE_SA and delete it.
This way, jobs for new IKE_SAs (created via create_new()) may be
scheduled/queued before checkin() is called. If they run before
that happens, they will now correctly block in checkout() instead of
doing nothing because the IKE_SA was not found.
We don't actually check that SA out (i.e. it's not registered with the
manager). That was originally different but had to be changed with
86993d6b90 to avoid that SAs created for rekeying don't block other
threads on the manager.
These changes should ensure that concurrent calls to checkout_by_config()
result in a single IKE_SA. For instance, when acquires for different
children of the same connection are triggered concurrently.
There are two major changes to the interface:
1) The peer config object is now always set on the returned IKE_SA.
That was previously only the case if an existing IKE_SA was
returned.
2) The IKE_SA is now always registered with the manager and properly
checked out, which also was only the case for existing IKE_SAs
before.
This adds support for TLS 1.3 to libtls and adds several new features to
existing TLS versions (e.g. support for x25519/x448, EdDSA or RSA-PSS).
Unfortunately, TLS 1.3 is not really usable for TLS-based EAP methods in
practice because, in particular, key derivation is not yet standardized.
While it works between two strongSwan instances and even FreeRADIUS 3.0.21,
there will be compatibility issues in the future when implementations move
to a standardized scheme. There are currently two Internet-Drafts in
development to specify that (see 121ac4b9e3 for details). Until they are
more stable, the default maximum version is set to 1.2.
The default minimum version has also been increased to 1.2 and several
older/weaker cipher suites have been removed (e.g. with 3DES and MD5).
If the default group listed in the cipher suite is not supported, we try
to use any other supported group (the groups are negotiated separately
so we are not locked in to a specific group).
Since DH groups (or with TLS < 1.3 curves) are negotiated separately,
it doesn't matter which one is listed in the cipher suite as any one could
be used.
This was previously treated like a resumption, which it is clearly not.
Also added a check that verifies that the same cipher suite is selected
during the retry, as per RFC 8446, section 4.1.4.
With TLS 1.3, the server sends its Finished message first, so the
session is complete after processing the client's Finished message,
without having to send anything else (in particular no acknowledgement
as the last message from the client is no fragment).
ECDSA support is currently required to run the tests because ECDSA
cipher suites are not filtered when determining the supported cipher
suites. Also required are ECDH groups.
If no cipher suites are available, the new versions are the previous
values but reversed (i.e. the versions were not changed but we still
ended up with a log message saying "TLS min/max TLS 1.3/TLS 1.0 ...").
Also switched to using the numeric version names to avoid the repeated
"TLS" prefix.
If we don't do this, we might negotiate a TLS version for which we don't
have any suites configured, so that the cipher suite negotiation
subsequently fails.
Even though we return from build(), we are not actually sending a response,
so we can't return NEED_MORE (would send an invalid ClientHello message) and
if we return SUCCESS, the EAP layer treats this as failure (there is a comment
in eap_authenticator_t about client methods never returning SUCCESS from
process()). Instead we return INVALID_STATE, which allows tls_t.build() to
exit from the build() loop immediately and send the already generated Finished
message.
We generate material for both MSK and EMSK even though we only need the
former. Because HKDF-Expand-Label(), on which the export functionality
is based, encodes the requested key length, we have to allocate the same
number of bytes as e.g. FreeRADIUS does (i.e. if we only request 64
bytes, those won't be the same as the first 64 bytes after requesting
128 bytes).
Unfortunately, key derivation for TLS-based methods is currently not
standardized for TLS 1.3. There is a draft [1], which defines a scheme
that's different from previous versions (instead of individual label
strings it uses a single one and passes the EAP type/code as context
value to TLS-Export()). The current code is compatible to FreeRADIUS
3.0.x, which doesn't implement it according to that draft yet (there are
unreleased changes for EAP-TLS, not for the other methods, but these only
switch the label, no context value is passed). In a separate draft
for EAP-TLS [2] there is an altogether different scheme defined in the
latest version (label combined with EAP method, no context and separate
derivation for MSK and EMSK).
So this is a mess and we will have to change this later with the inevitable
compatibility issues (we should definitely disable TLS 1.3 by default).
[1] https://tools.ietf.org/html/draft-ietf-emu-tls-eap-types
[2] https://tools.ietf.org/html/draft-ietf-emu-eap-tls13
PKCS#1 v1.5 signatures are not defined for use with TLS 1.3 (they can
only appear in certificates, we now send a signature_algorithms_cert
extension to indicate support for them). So for RSA certificates, we
must support RSA-PSS signatures.
There are two sets of schemes, that are differentiated by the type of
RSA key used for the signature, one is for classic RSA keys (rsaEncryption
OID), which can also be used with PKCS#1 when using TLS 1.2, the other
is for RSA-PSS keys (RSASSA-PSS OID), which are not yet commonly
used (and can't be generated by our pki tool). According to the RFC,
PSS must also be supported for TLS 1.2 if the schemes are included in
the signature_algorithms extension (e.g. OpenSSL does not use PKCS#1 v1.5
anymore if PSS is proposed).
This changes how these schemes are stored and enumerated (they are not
treated as combination of hash algo and key type anymore).
Legacy schemes (MD5/SHA-1) are removed.
With the previous code, there was an issue when replying to TLS 1.3
post-handshake messages. In this case, SUCCESS is eventually returned
from build(), however, no actual data has been received so in_done is 0.
This was interpreted as EOF, plain_eof was set to TRUE and no further data
was read from the socket afterwards.
Returning SUCCESS from build() if the exchange is initiated by
write_(), as is the case with the finished reply, never was a problem
because there the return value of 0 is not interpreted as EOF.
If data is processed that eventually includes a TLS close notify, build()
will fail after a close notify has been sent in turn. However, propagating
that error immediately when reading prevented ever returning the data
already processed before the close notify was received.
Note that this breaks connecting to many TLS 1.3 servers until we support
HelloRetryRequest as we now send a key_share for ECP_256 while still
proposing other groups, so many servers request to use CURVE_25519.
Tobias Brunner